Our Products #4964329

Maretron's Black Box Computer (MBB100) is a dedicated processing unit that comes preloaded with Maretron's N2KView vessel monitoring and control software. Unlike a PC that allows any software to be loaded, the MBB100 runs only N2KView software making it extremely stable and dedicated to monitoring and controlling your vessel. The MBB100 connects to a monitor through a VGA connector and associated touch screen through a USB or serial port connection. Alternatives to controlling the N2KView software through a touch screen include keyboards, mice, or track balls connected through USB ports. The MBB100 has an Ethernet port for communicating with an NMEA 2000 network through Maretron's Internet Protocol Gateway (IPG100). The Ethernet port is also used for connecting Internet Protocol (IP) cameras for viewing within the N2KView software. Although the MBB100 comes pre-installed with the N2KView software, a separately purchased license key plugged into the IPG100 is required. (see IPG100 for more details).

Maretron's DSM150 is a high-resolution sunlight viewable color display that interprets and displays NMEA 2000 instrument, navigation, and vessel monitoring data. The DSM150 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display capabilities, the DSM150 features an alert alarm package and electrical switching capability. Unlike traditional single-display units, DSM150 users can choose numeric, gauge, bar or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost. The DSM150 will directly connect with any NMEA 2000 network and with the exception of AIS data will display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable. The DSM150 displays a multitude of information including AC power, anchor status, battery, depth, electrical distribution, engine, environment, fuel management, GPS, heading, navigation, pressurevacuum, rudder, speed, status indicators, tanks, temperature, time, transmission, water makers, weather, wind and more.

Maretrons third generation Black Box (MBB300C) is a dedicated processing unit that includes Maretrons N2KView vessel monitoring and control software. Unlike a PC that allows any software to be loaded, the MBB300C runs only N2KView software making it extremely stable and dedicated to monitoring and controlling your vessel. The MBB300C is ruggedized for marine use and includes a solid state disk drive to withstand the pounding associated with waves. And since the MBB300C dissipates less than 10 watts, there is no need for internal cooling fans that are noisy and wear out causing electronics to overheat and fail. The MBB300C connects to a monitor through a VGA connector or an HDMI connector while the associated touch screen connects through a USB or serial port. Alternatives to controlling the N2KView software through a touch screen include keyboards, mice, or track balls connected through USB. In addition to the two completely isolated CAN bus connectors for simple connection to single or redundant NMEA 2000 networks, the MBB300C has an Ethernet port for connecting Internet Protocol (IP) cameras for viewing video within the N2KView software. Of course you get the same flexibility using Maretrons N2KView software from the MBB300C as you would running the software on a PC, which includes the ability to configure as many screens as you want with exactly the information you want to see. Plus you get free upgrades to the software as improvements and new features are added.

The Maretron E2500 is a 2.4GHz 5GHz Wireless-N router which comes pre-configured from the factory for use with Maretron's N2KView vessel monitoring and control system. Maretron's E2500 is the officially supported method for connecting Maretron client and server devices. Use the E2500 to connect PC's running Maretron's N2KView software with Maretron's IPG100 Internet Protocol Gateway. For Maretron's MBB300C Black Box for Vessel Monitoring and Control, Maretron's TSM800C 8" Vessel Monitoring and Control Touchscreen and Maretron's TSM1330C 13.3" Vessel Monitoring and Control Touchscreen, use the E2500 to connect IP Cameras and Encoders. Using the Maretron E2500 to interconnect the components of your N2KView system will result in easy installation and reliable operation.

Maretrons Black Box (MBB200C) is a dedicated processing unit that includes Maretrons N2KView vessel monitoring and control software. Unlike a PC that allows any software to be loaded, the MBB200C runs only N2KView software making it extremely stable and dedicated to monitoring and controlling your vessel. The MBB200C is ruggedized for marine use and includes a solid state disk drive to withstand the pounding associated with waves. And since the MBB200C dissipates less than 25 watts, there is no need for internal cooling fans that are noisy and wear out causing electronics to overheat and fail. The MBB200C connects to a monitor through a VGA connector and associated touch screen through a USB or serial port connection. Alternatives to controlling the N2KView software through a touch screen include keyboards, mice, or track balls connected through USB. In addition to the two completely isolated CAN bus connectors (M12) for easy connection to single or redundant NMEA 2000 networks, the MBB200C has an Ethernet port for connecting Internet Protocol (IP) cameras for viewing within the N2KView software. Of course you get the same flexibility using Maretrons N2KView software from the MBB200C as you would running the software on a PC, which includes the ability to configure as many screens as you want with exactly the information you want to see. Plus you get free upgrades to the software as improvements and new features are added.

Maretron's EMS100 connects into engine wiring harnesses and converts analog signals such as water temperature and oil pressure to the new marine digital interface (NMEA 2000). Critical engine data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000 compatible display. All the information you need is available anywhere and everywhere you need it. For Yanmar engines an additional harness (purchased separately) simplifies the wiring by plugging directly into the Yanmar harness. (See the EMS100 Datasheet under the downloads tab for ordering information.) The EMS100 is compatible with existing instrument panels and key switches so you don't need to remove them while upgrading to newer digital technology. For new installations, the EMS100 and a compatible NMEA 2000 display can replace the traditional analog instrument panel.

Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000 marine digital interface. Critical engine, transmission, and genset data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000 compatible display. All the information you need is available anywhere and everywhere you need it. The J2K100 only listens to the J1939 network and draws no power from it (power is derived from the NMEA 2000 interface). The J2K100 does not transmit any information over the J1939 network so it will not interfere with existing engine control or status data in any way. The J2K100 can also be used as part of a complete fuel computer. Simply connect the J2K100 together with the Maretron universal display (DSM150 or DSM250) and GPS antennareceiver (GPS200) and you have a system capable of displaying gallons per hour andor miles per gallon.

Whether you are interested in monitoring your vessels systems while underway or remotely from your home or office, Maretrons N2KView software displays the information you need including engines, generators, tanks, rudders, navigation instruments, local weather, and much, much more. N2KView is completely user-configurable and you are free to create different screens for your exact needs while easily switching from screen to screen for monitoring all your systems. Digital displays, analog gauges, graphic displays, warning lights, and bar graphs, all can be configured exactly how you want them to be. You can even set the operating limits and color bands for analog gauges so you know when things are within limits and when they are not. N2KView is a comprehensive vessel monitoring and control software that goes beyond simple monitoring. With N2KView you get additional functionality including alerts, video, control, and fuel management. The alerts functionality allows you to setup as many warnings and alarms as you need so you can be forewarned of potential problems. With alerts, you can relax knowing that the system is watching for smoke, CO, high bilge water, or anything else you deem important. N2KView video capability allows you to add cameras as part of the monitoring system - for example a camera in the engine room - or the cameras can be used as part of the security system. The control functionality gives you the ability to manage your electrical system; for example, you can turn lights or pumps on or off directly from N2KView and even tell if the lights or pumps are burned out and not working. Lastly, the fuel management function uses information from the fuel flow monitor, tank monitors, and GPS to provide advanced information like distance and time to empty as well as fuel rate and fuel economy.