Post Buy Requirement
ME
United States
Add Review

Our Products

High Temperature Covers

We have a large inventory of turbo covers, arm covers as well as flex and horn and waste gate covers. We generally stock covers in silver, gray and black. Please keep in mind that the gray and black are more durable. Don't see what you need or are unsure? Just contact us and we can guide you to the proper cover for your installation.
View Complete Details

Crush Resistant Sleeves

Crush resistant sleeves or "crush rings" are collars that are inserted and bonded to the inside of fiberglass tubing. They are used to reduce the risk of collapsing or crushing the fiberglass tube when tightening the hose clamps. We install crush rings at all fiberglass hose connections and recommend it to all of our customers. Constructed of 316L stainless steel.
View Complete Details

Temp Alarm Switches

We always recommend having your exhaust system hooked up to an alarm system. We install a heat sensor pad on all our watercans so that you can easily hook up your system. Most systems are wired for being "normally opened". So if the temperature goes to 200F or above the switch closes and sets off the alarms. We also carry the Viking Yachts thermostats in stock for their systems.
View Complete Details

Exhaust Elbows

Marine Exhaust Systems, Inc. offers an unrivaled selection of quality exhaust system parts and packages. On the leading edge of exhaust system solutions for diesel-powered yachts, we provide stainless steel and fiberglass products for production, as well as customized and replacement exhaust systems. Marine Exhaust Systems is known world-wide for solving noise, vibration and back-pressure problems. Our family of stainless steel and fiberglass mufflers products boasts numerous patents. These patented technologies are a direct result of developing the industry's best solutions for our customers - not only for reducing noise and vibration, but also for solving challenging installation issues brought about by the ever-changing constraints of confined engine room configurations with limited access.
View Complete Details

Gaskets

You always want a proper seal for your exhaust parts. We have only listed the most popular gaskets that customers buy over and over again. Please keep in mind gaskets are specific to the engine and the exhaust manufacturer. Don't see what you need or are unsure? Please click on "Contact Us" and we can guide you to proper gasket for your installation.
View Complete Details

Support Brackets

Proper support of the exhaust is imperative to prevent stress related failures of the exhaust components. Support brackets are used to support or brace the system down to the gear box or the gear box mount bracket. Overhead mounts are designed for overhead exhaust support. Made from 316L stainless steel with an electropolished finish.
View Complete Details

T-Bolt

When using silicone hose it's CRITICAL to have a clamp that won't bite or cut into your hose. Our clamps have rounded edges to prevent hose damage. Made from heavy duty 316 annealed stainless steel and electropolished to withstand the most severe marine environment. We go the extra mile and pre-lubricate the bolt threads with Tef-Gel to eliminate thread galling during installation. Manufactured exclusively to our specifications. We always recommend double hose clamping. You should install 4 clamps per hose connection (2 on each side).
View Complete Details

Worm Gear

Reliable, cost effective clamp. Made from 316 annealed stainless steel*. Rolled edges to eliminate the risk of damage to hose. Extra wide threads on the band are stamped leaving an unperforated band smooth on the inside. Band and screw threads are properly pitched rendering the clamp virtually immune to vibration back-off. Pre-lubricated drive gear for smooth operation. We always recommend double hose clamping. So you should install 4 clamps per hose connection (2 on each side).

*316 annealed stainless steel is far more corrosion resistant in the marine environment when compared to 304 or 302 commonly used in other brand worm gears.
View Complete Details

V-Band Clamps

Manufactured from high strength stainless steel to insure reliability and extended service life. Designed for connecting exhaust flanges or flange to turbocharger discharge. Made to service temperatures up to 1200F (649C) under under corrosive environmental conditions. Exclusively manufactured to our specifications.
View Complete Details

Silicone Hoses

Our silicone hose is the best hose for short connections. It helps isolate exhaust systems from engine vibration and movement. Helps solve slight misalignment problems. Easier to install and seals better than black rubber and some other brands of silicone hose. It will not become brittle, hard or rigid. remains flexible. Resistant to heat, aging, exhaust gases and the ozone. The smooth, shiny finish enhances your engine room appearance and is easy to clean. SAE J2006 standard compliance and labeling, including compliance with NMMA and ABYC exhaust hose standards.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Marine Exhaust Systems Inc.)
  • Riviera Beach, FL 33404 map, United States
  • Share us via