Met-Pro Global Pump Solutions, a CECO Environmental Company

The corrosion resistant Series 1500 horizontal pumps built to ASMEANSI B73.1 standards are available in nineteen sizes.Capacities to 5000 GPM (1140 m3hr) Heads to 400 feet (125 m) Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2 Working pressures to 200 PSI (1, 379 kPa) Fiberglass reinforced plastic (FRP) construction VR-1, VR-1A, BPO-DMA and EY-2 materials ASMEANSI B73.1 conformance High strength casings with 150lb. FF flanges Continuous strand fiberglass construction Integral shaft sleeve Large capacity bearings External impeller adjustment Heavy duty shaft FRP baseplates available

The M300 Series Pumps are sealless, chemical process pumps built to ASMEANSI B73.3 dimensions. Twelve sizes are available in ductile iron or 316SS construction. Other materials of constructions available upon request. Capacities to 1200 GPM (270 m3hr) Heads to 475 feet (145 m) Pumping temperatures to 350°F (177° C) Working pressures to 275 PSIG (1, 896 kPa) Discharge-to discharge circulation Silicon carbide bearings Samarium cobalt rare earth magnets Hastelloy-C containment shell

Fybroc's new line of non-metallic, corrosion resistant butterfly valves are ideal for handling corrosives, seawater, solvents and other difficult liquids. Standard model (1.5 - 12" 40 - 300mm) has a black polypropylene (PP) body, a polyvinylidene fluoride (PVDF) disc and a fluorocarbon (Viton®) seat for superior chemical resistance and temperature capability 316 stainless steel shaft has full engagement over the entire length of the disc and is a non-wetted part Only solid plastic disc and elastometric liner are wetted parts Stem retainer - polypropylene retainer to prevent stem removal Seat over tightening protection - molded body stops and seat stress relief area Spherical disc design offers increased Cv, ultimate sealing and high cycle life 18 position throttle plate for lever handle style

The corrosion resistant Series 1530 pumps provide the space and weight savings of a close coupled pump combined with the ruggedness of a standard Series 1500 pump. Sixteen sizes are available.Capacities to 1500 GPM (345 m3hr) Heads to 400 feet (125 m) Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2 Working pressures to 200 PSI (1, 379 kPa) Fiberglass reinforced plastic (FRP) construction VR-1, VR1A, BPO-DMA and EY-2 materials Back pull-out design Continuous strand fiberglass construction Integral shaft sleeve NEMAIEC motors with JM shaft configuration High strength casing with integral 150 lb. FF flanges FRP baseplates available

The pH Series chemical process pumps are built to ASMEANSI B73.1 dimensions. Twenty-eight sizes are available in ductile iron, 316SS, CD4MCu and Alloy 20 construction. Additional higher metal alloys (Hastelloy B or C, titanium, etc.) are available upon request.

Sethco® UDUV Series heavy duty industrial sump pumps are ideally suited, structurally and hydraulically, for heavy-duty service. They provide outstanding mechanical strength at elevated temperatures and excellent chemical resistance to concentrated acids and alkalies. Capacities to 220 GPM (50 m3hr) Heads to 135 feet (41 m) Standard pump lengths up to 10 feet (3 m) Motors to 15 hp (11.2 kW) CPVCPVC materials of construction (up to 140º F 60º C) All CPVC construction for higher temp applications (up to 180º F 83º C) 316SS, Carp-20, Titanium or Hastelloy-C pump shafts Custom built modular pumping stations available Internal, external or bypass flush bearing lubrication options Non-metallic mounting plate – custom sizes available One piece column design adds strength and stability to pump body Impeller casing design permits passage of occasional solid particles and fibrous materials Corrosion resistant carbon-filled PFTE line shaft bearing Maximum 24" (610 mm) bearing span Mounts to standard NEMA or IEC frame motors Vapor seal designed to protect motor pedestal from corrosive vapors