Post Buy Requirement
MI
United States
Add Review

Our Products

Low Voltage General Purpose Transformers

Single PhaseType 1-E EncapsulatedType 1-E general purpose transformers are single phase, resin encapsulated designs suitable for indoor or outdoor applications. Its totally enclosed, non-ventilated enclosure make it ideally suited for use in areas that contain dust, moisture, or corrosive fumes. Available in ratings through 25 KVA type 1-E transformers can be mounted in any position for indoor installations and in upright positions only for outdoor installations.
View Complete Details

MDP60-24-1CBA 60w 24VDC

Microns low profile DC power supplies address shallow depth enclosure challenges frequently encountered in space-sensitive applications such as building automation panels, elevatorescalator panels and indoor HVAC power source needs. Available in a range of power ratings, these units are suitable for both commercial and industrial environments.
View Complete Details

ValuTRAN

ValuTRAN is designed to deliver industrial control power electrical performance in a small footprint. This cost-effective product line will satisfy custom application requirements with the same quality and service levels found in the Micron ImperviTRAN and ImperviTRAN I-2 encapsulated designs, and will be shipped within Microns consistently industry shortest lead time of 10 working days or less ARO. With its varnished coil construction, ValuTRAN offers another option, especially if your application does not require or significantly benefit from an encapsulated coil design.
View Complete Details

Global TRAN

In response to the change in compliance standards for CE marking of industrial control transformers as required by IECEN guidelines, Micron has introduced new GlobalTRAN models in compliance with EN61558-2. This new IECEN standard replaces the previous IECEN 60742 standard for control power transformers that expired on December 31, 2003. The Micron design engineering department has produced 61558-2 compliant designs that permit the customer to retain mounting layouts used for the previous Micron 60742 designs.
GlobalTRAN products carry the CE mark, certifying 100% compliance with requirements of EN61558 for Non-Short Circuit Proof Isolating Transformers. GlobalTRAN control transformers feature touch-proof terminals, utilizing either Microns SafeTouch terminal covers or a touch-proof terminal block, and meet true IP-20 or IP-00 terminal protection ratings as defined by IEC-529.
GlobalTRAN is the most reliable and versatile control transformer in the industry today.
Carries the CE mark
20-year warranty, double the industry standard
Epoxy encapsulated coils for cooler, safer operation
SafeTouch terminals for additional safety
Optional integral primary andor secondary fusing
10-32 screw terminals, molded terminal barriers
Molded-in terminals and phil-slot screws
View Complete Details

ImperviTRAN

ImperviTRAN is the ultra-reliable industrial control circuit transformer. Behind its clean design is a toughness that makes it measure up to any requirement placed upon it. Manufacturers of industrial and commercial equipment, control panels and centers have made ImperviTRAN the most
accepted transformer in the industry.
Epoxy encapsulated coils
20-year warranty, double the industry standard
Secondary fuse clips where applicable
Optional primary fusing
Molded terminal barriers
10-32 screw terminals
Molded-in terminals
Phil-slot screws
View Complete Details

Low Voltage General Purpose

Single or Three Phase Low Voltage General Purpose Transformers
Resin encapsulated or ventilated casings provide flexibility in use-optional weather shields allow use of ventilated casing outdoors
Encapsulated totally-enclosed, non-ventilated enclosure ideally suited for use in indooroutdoor areas that contain dust, moisture, corrosive fumes
Can be mounted in any position for indoor installations and in upright position for outdoor installations

Micron announces the introduction of our new Same Day Ship-From-Stock Program for Micron Enclosed General Purpose transformers. Over 90 distinct catalog items, including voltage matching buck-boost designs, are available for shipment from Micron inventory in our Illinois manufacturing facility.
View Complete Details

Buck-Boost

Small KVA, single phase, 600 volt class, insulating transformers
Dual Primary and dual Secondary windings
Use connected as autotransformers by utilizing one unit for single phase applications-two or three banked for three phase operation
Primarily used for motor operation to correct fluctuating line voltage or to obtain a neutral on a delta system
Should not be used for motor control circuits
Buck-Boost transformers provide an economical method of correcting lower or higher voltage to a voltage rating more suitable for efficient equipment operation
View Complete Details

Control Transformer Accessories

Primary Fuse Kit
In addition to factory installed primary fusing capability, Micron offers a primary fuse kit for ImperiTRAN and ValuTRAN for field installation. The primary fuse kit includes a 2-pole class cc fuse block, instructions, and all associated mounting and wiring hardware. Additionally, this fuse kit will fit most competitors units. The primary fuse kit, when installed, will add a maximum of 1116 to the transformer A dimension and 1-1516 to the C dimension. To order, call 800 664-4660 and request catalog number FKTP-1001.
SafeTouch Terminal Covers
SafeTouch terminal Covers are optionally available for GlobalTRAN as well as other ImperviTRAN and ValuTRAN transformers, and meet the fingersafe or touch-proof requirements for IEC specification 529 IP20 degree specification for protection. Covers are available in kit form for the transformer, either with or without secondary fuse clips. When installed, the covers prevent contact with current-carrying parts.
View Complete Details

Power Reactors

Micron can design and build custom power components intended for reduction or mitigation of harmful line conditions including harmonics on both line and load circuits. We are not limited to catalog standard designs, and will design and build to your specific application needs.






New custom designs can be supplied within five working days, with first articles delivered within four weeks of drawing approval. Established designs require a maximum of 20 working days to ship day, with shorter lead times available depending upon complexity of design and nature of raw material requirements. As is the case with all Micron products, serialized detailed test results may be supplied with all items shipped. Micron can design and build the following products to your specific performance, physical envelope size, and mechanical mounting requirements:
Line and Load Reactors
DC Link Chokes
Custom Inductors
View Complete Details

Micron DINergy DIN Rail Mounting Power Supplies

Microns DINergyTM family of small form DIN rail mounting power supplies provide valuable features and benefits at an economical price point and can be shipped same day from our Illinois inventory! Robust, heat dissipating construction, 60 C ambient operating rating (no derating necessary), and high quality electronic components provide long life backed by Microns 3 year warranty for dependable control power in process automation and other control applications. Microns automatic input voltage matching circuitry senses and adjusts the product to accommodate any input voltage from 100-240VAC without the need for switch actuation. Unlike many competitive product designs employing passive choke filters, DINergy units feature active PFC systems that provide superior harmonic filtering.
85-264VAC wide-range auto select input
Compact size, high efficiency and DIN Rail mounting
Units listed for UL1604 Cl1 Div 2 hazardous locations
Active PFC meets EN61000-3-2
Overcurrent, shortcircuit, overvoltage and overheat protection
DC OK LED and active output terminal for remote status check
Power boost available for start up load demand
Parallel operation (increase output power or redundant operation)
UL508, UL60950 and IE C60950
EMI meets FCC15 B, EN55022 B and CISPR22 B
High reliability, MTBF>200, 000 hrs
3 year warranty
View Complete Details

Power Inductors

Micron can design and build custom power components intended for reduction or mitigation of harmful line conditions including harmonics on both line and load circuits. We are not limited to catalog standard designs, and will design and build to your specific application needs.






New custom designs can be supplied within five working days, with first articles delivered within four weeks of drawing approval. Established designs require a maximum of 20 working days to ship day, with shorter lead times available depending upon complexity of design and nature of raw material requirements. As is the case with all Micron products, serialized detailed test results may be supplied with all items shipped. Micron can design and build the following products to your specific performance, physical envelope size, and mechanical mounting requirements:
Line and Load Reactors
DC Link Chokes
Custom Inductors
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Donald Clark (Micron Industries Corp.)
  • Oak Brook, IL 60523 map, United States
  • Share us via