Post Buy Requirement
MF
United States
Add Review

Other Products / Services

FOUR-AXIS MACHINES

  • size 65 inches
Empire produces mold-cleaning machines capable
of handling parts up to 65 inches in diameter and
10, 000 pounds. The system shown below includes two
turntables so loading and blasting can be performed
simultaneously. To enhance versatility as well as further
expedite cleaning, the system features a recipe-storage
capability through which processing parameters for
specific parts can be recalled with fingertip ease. In
addition, a three-axis nozzle manipulator, shown to
the right, provides easy access to hard-to-reach areas
from above or below the part.
View Complete Details

Indexing Turntable Machines

  • Model TT-20
  • diameter 20”, 30”
This programmable, indexing turntable machine
reduces per-unit cleaning costs on piston rebuilds by
over 30 percent compared to previous methods.
By coordinating the movements of 16
blast guns, oscillating vertically and
horizontally, with spinning work stations
on a rotating platform, the system ensures
thorough coverage and fast cleaning
in a single pass. Eight guns oscillating
vertically clean the sides and skirts of the
pistons. The guns sweeping horizontally
clean tops and interiors.
View Complete Details

Pipe Blasting

  • Size 3/4-inch
Cleaning and Preventing Corrosion with Proper Surface Preparation
Clemco pipe tools help you get the job done faster, enhancing productivity and saving you money. Clemco tools
are engineered for a wide range of pipe diameters and most common blast abrasives. Each tool handles a specified
pipe diameter range with the use of centering devices.
Easy Set Up and Use
These pneumatic tools use compressed air, common abrasives, and standard blast machines, coupled blast hose
attached to a customer-provided pipe lance normally in a length that matches the pipe to be cleaned. The tool is placed
at the far end of the pipe and drawn manually through the pipe at a speed determined to clean the pipe to the desired
degree of cleanliness.
View Complete Details

Pre-Engineered Blast Booths

  • Dimensions 10’ wide x 10’ long x 10’ high
Empires Pre-Engineered Blast Booths (PEB) feature the
essentials of blast rooms at a fraction of the cost. These
ten-foot-high booths not only include the hardware
required to strip large parts fast. They also reclaim
media, remove dust and breathe fresh air into the work
enclosure with Empires exclusive Booth Ventilation
System (BVS).
Available in five sizes (See specifications on back
page.), these booths ship flat and can be assembled by
three people using a forklift or scissor lift in two days.
Because the PEB bolts together and requires no excavation,
it can be disassembled and set up at a new site in
less than a week.
For many applications requiring strict environmental
and safety compliance, Empires Pre-Engineered Booths
offer an attractive alternative to makeshift enclosures or
higher priced blast rooms.
View Complete Details

Abrasive Equipment Gibson Table Blasters

  • MODEL 36” Power Table
  • Dimensions 120x96x65
Gibson Table Blasters process parts weighing up to 10, 000
pounds with diameters up to eight feet and heights
exceeding four. Featuring eleven standard models,
Gibsons line of Table Blasters provides the versatility and
flexibility to efficiently blast parts ranging from ten-pound
gears to heavy fabrications.
These rugged machines facilitate cleaning, peening,
deburring, profiling, finishing and many other surfaceconditioning
tasks in metal-intensive industries involving
casting, welding and fabrication.
For processing, parts are loaded onto a powered
turntable which rotates within the blast envelope to
provide 360 exposure to the blast stream. Models
with an oscillating blast wheel, such as our 36 Power
Table, enhance blast coverage. And features like the swing door on our Table Blasters expedite loading
and unloading by enabling the operator to swing the
systems door-mounted turntable in and out of the
blast enclosure.
View Complete Details

Gibson Roller Conveyor Blast System

  • wide 24”
The Gibson roller conveyor blast system is a fully automated blast system designed for 24 hour
production. Systems are typically used in applications blasting heavier parts at a high rate. Blast systems
are easily integrated into the rest of the production flow such as paint lines.
Gibson roller conveyor blast systems offer the ability to utilize a blasting machine in conjunction with
another machine to automate a process reducing high labor costs normally associated with batch type
blasters. They come in many different blast envelopes. They also come with multiple blast wheels and
horse powers with a level of speed and efficiency unmatched by other equipment manufactures.
By flowing these parts within the blast envelope, these machines deliver consistent results automatically
while working non-stop in a multi-shift production facility.
Gibson Structural Steel Shot Blast
The Gibson structural steel shot blast system is designed for descaling and cleaning structural shapes
before or after fabrication. Blast Envelopes start at 24 wide and 36 high cleaning envelope. They come
in many different blast envelopes.
View Complete Details

Pro-Finish Cabinets

  • Model 2636
  • Dimensions 26x36x30
If your operations involve cleaning with chemicals,
acid etching or dipping, liquid honing, wire brushing,
sanding, deburring, grinding or peening, moving up
to a Pro-Finish cabinet will normally expedite work,
improve quality and eliminate the environmental
problems associated with chemical finishing.
Built for production blasting, these rugged
cabinets enable you to perform a long list of tasks
ranging from blending surface flaws to removing
foreign matter, such as carbon from pistons, without
affecting tolerances. By simply varying air pressure
and blast media, you can perform almost any surfacefinishing
job more quickly and precisely than with
alternative methods.
Pro-Finish cabinets can be specified with either
suction or pressure blast systemsa pressure system
being the preferred choice for faster production and
more precise control of media at both high and low
operating pressures. In addition, they are available in
seven sizes and loaded with standard features that
reduce operating and maintenance costs.
View Complete Details

BB4 Basket Blasters

  • Model Number BB2-3K
  • Size 30” dia. x 16” wide
Empires BB2 and BB4 Basket Blasters automate cleaning,
peening and finishing of small workpieces. With certain
types of parts, no other finishing method can compare to
these heavy-duty production machines in terms of speed
and quality results.
Operation is simple: Load parts into the unit, set the
precision timer, and the Basket Blaster does the rest.
By tumbling parts within abrasive blast streams, these
machines deliver consistent finishes automatically.
Empires heavy-duty Basket Blasters feature an
unloading chute to speed parts handling and a polyurethane-lined
media reclaimer supported by rugged
ductwork to reduce maintenance requirements.
Two models are available: a BB4-3K with a 350-pound
parts capacity and three pneumatically controlled
oscillating blast nozzles that increase production
rates while reducing power consumption, and a
smaller BB2-3K unit with two fixed nozzles and a
capacity of 300 pounds.
View Complete Details

Pre-Assembled Blast Rooms

  • size 14 ft long x 7 ft wide x 8 ft
The pre-assembled blast
room is built on a rigid
structural steel floor,
with 10-gauge steel
walls and 16-gauge steel ceiling,
1-12 inch thick floor grating,
and full-height, full-width work
doors.
High volume air inlets and a
rugged down-flow dust collector
combine to create true cross-draft
ventilation at 50 fpm to minimize
dust clouding inside. Bright
fluorescent lighting enhances visibility.
Place the room on any smooth,
level floor and install a ramp to
minimize site-prep requirements,
or install in a pit to make the
blast room floor level with your
existing floor.
View Complete Details

BBO Basket Blasters

  • Shipping Weights BBO-1: 100 pounds, BBO-2: 130 pounds
If youre looking for a fast, efficient, economical method
for finishing small parts, check out one of Empires BBO
Basket Blasters. To finish parts, you simply drop them into
the BBOs nine-inch by nine-inch basket, set the time,
and let these table-top work savers do the rest. As parts
rotate through an abrasive blast stream, they are cleaned,
peened or finished evenly and automatically. By varying
air pressure and abrasive media, you control the type of
finish as well as required processing times.
Beyond freeing you from the tedious chore of processing
parts manually, Empires BBO Basket Blasters save
you time and money in other ways. They are inexpensive,
come fully assembled and ready to operate, require only a
BBO Basket Blaster Specifications
Basket: 9 inch x 9 inch, 116 perforated metal, removable
Construction: All welded, 16 gauge
Motor: 115 Volts, 60 Hertz, 1 Phase, .01 hp, 7 RPM, Fixed
Electric Timer: Maximum cycle: 60 minutes
Dust Collectors: BBO-1: Dry filter dust bag, 1 amp
BBO-2: DC-16 with blower and cartridge filter, 8 amp
Load Capacity: 15 pounds maximum
Shipping Weights: BBO-1: 100 pounds, BBO-2: 130 pounds
Air Requirements: 10 SCFM at 60 psi using standard 332 air jet
Standard Features: Air gauge Pressure regulator Moisture separator
Options: Blow-off gun PVC-coated basket
two-horsepower compressor, use less electricity than a
150-watt light bulb, and meet OSHA requirements.
View Complete Details

IL-885 Conveyor Cabinets

  • Series IL-885
Based on Empires field-proven Pro-Finish technology,
the IL-885 incorporates a rugged conveyor assembly driving
a 9-inch-wide by 72-inch-long belt. Variable speed
controls and adjustable parts guides provide the versatility
to deburr, clean, profile and finish parts of many different
shapes and sizes ranging from tubular to flat; if two sides
of a workpiece require blasting, the piece can be reloaded
for a second pass.
The angles and distances of the cabinets gun holders
can be adjusted to focus four or six blast guns on work surfaces,
enabling users to tailor blast envelopes for a variety
of parts. Other features of the IL-885 include: a control
panel located on the loading end of the conveyor to shut
down or start the system, its lights and the blower motor
powering media recycling and dust collection. Variable
conveyor-speed control, as well as conveyor stop buttons
at the entrance and exit vestibules of the cabinet, are
also provided.
For additional information about our IL-885
Conveyor Cabinets, go to the next page, contact Empire
or your local Empire distributor, and visit our web site at Six or Four Blast Guns mounted on separately
adjustable holders enable operators to control blast
coverage.
View Complete Details

PRS Blast & Recovery Systems

  • Model PRS-6
Using economical blast media, such as slag, for
industrial blasting can be very costly indeed. Because
these low-cost abrasives break down so quickly, reusing
them is impractical. As a result, youre constantly
paying for replacement media, disposal of spent media,
and manhours to move this material aroundall of
which can put a big drain on your profits.
With Empires pneumatic Blast & Recovery System
(PRS), you can tap the cost-saving advantages of
more durable media for only a modest investment.
Empires PRS lets you move up to recyclable media,
such as aluminum oxide, chilled iron and steel grit,
which can be used effectively over and overfrom
6 to 200 times. The result is usually a very attractive
return on investment in media savings alone.
Reusable media are also faster acting and less
dusty, meaning you get the additional advantages of
increased productivity and a cleaner working environment.
With the PRS, you can move blasting operations
into enclosures to comply with increasingly stringent
environmental regulations. And, because the PRS
recycles good media while removing dust and fines,
blasting results are more consistent.
View Complete Details

ABTEX BRUSH DEBURRING

Since 1980, manufacturers worldwide have relied on
Abtex as their primary defense against the burrs in
cut metal edges that can quickly disable expensive
engines and other machinery and that create safety
hazards that sometimes lead to debilitating liability
lawsuits.
The company has earned its reputation through
decades of developing innovative machinebrush
solutions for customers in automotive, aerospace,
military, industrial, medical, metal-finishing, and
many other industries.
Deburring is Abtexs only business.
Abtex custom-designs brushes only for deburring
not for painting, sweeping or basting.
Whether the deburring challenge involves cold-rolled
steel, stainless steel, aluminum or powdered metal,
Abtexs solutions offer unparalleled results.
View Complete Details

Robotic Blasting Cell

  • diameter 12 inches
  • size 24” x 24”
Empires new RBT36-F robotic pressure-blast system opens the door for many firms to cash in on the benefits
of high precision air blasting. Capable of processing parts up to 12 inches in diameter by 12 inches tall, the
RBT36-F employs a Fanuc 6-axis robot to control nozzle movement plus a DC or Servo drive to control part
movement, enabling users to assure the quality control and deliver the process validation so often required by
todays aerospace, automotive and medical-equipment sectors.
In addition to helping customers control quality, the RBT36-F reduces the consumption of blast media,
energy, floor space and raw materials while boosting the speed, flexibility and yield of manufacturing
processes. In short, the system does more with less, contributing to a better bottom line.
The RBT36-F includes dust collection, media reclamation, controls all the hardware and software
required for robotic blasting at standard automation pricing.
In addition to the RBT36-F, Empire produces a larger version of this standard system for parts
up to 24 x 24, as well as engineered robotic systems tailored to specific applications.
View Complete Details

Cartridge Dust Collectors

  • Size 35”x 40”x 116”
  • Capacity 16 gallons
Empires Cartridge Dust Collectors (CDC) increase productivity
in three ways.
For starters, they can operate continuously; the airblast
system does not have to be shut down while dust
is removed from filtration surfaces.
Next, they simplify dust removal from filtration material.
Push-button reverse jet-pulsing, a standard feature
on all three CDC units, enables an operator viewing a
minihelic gagewhich monitors pressure drop across
the filterto purge dust while the air-blast system is
operating. Alternatively, an optional photohelic upgrade
moves dust from filtration surfaces to a collection drum
automaticallyat the right time and without operator
involvement.
Finally, the collection cartridges, once worn, can be
quickly and easily removed and replaced through a
large access door.
Empires Cartridge Dust Collectors extend
operating cycles, maximize up time and
reduce maintenance costsall adding to higher
profits.
View Complete Details

SafeStrip Portables

  • Model Number SS-1
  • Size 1/8”, 5/32”, 3/16”
Empire SafeStrip portables are designed specifically
to handle fine, light media used in the cleaning
and stripping of delicate substrates. SafeStrip portables
quickly and safely remove old coatings, dirt,
oil, corrosion and other unwanted residues from
soft metals, rubber, plastics and other sensitive
surfaces. They are ideal for work on statues, monuments,
machinery and molds, and in many other
applications requiring a light touch.
SafeStrip portables assure even flow of light
media by creating a pressure differential between
the pressure vessel and blast pressure. This pressure
differential, which can be adjusted precisely with a
manual valve, prevents bridging and produces consistent
feed rates.
When used with non-toxic abrasives, such as
bicarbonate of soda or wheat starch, SafeStrip
portables are environmentally safe, as long as
materials being removed from the work surface are
also non toxic.
For more information on SafeStrip portables, call
Empire or your local Empire distributor.
View Complete Details

Gibson Tumble Blasters

  • Model Number 1.5BB
  • Dimensions 87x50x47
Gibson Tumble Blasters process multiple parts, ranging
in size from small to medium, with a level of speed and
efficiency unmatched by other types of equipment in a
comparable price range.
Gibson produces Tumble Blasters in ten standard
models with load capacities ranging up to 3, 000 pounds
or 24 cubic feet. (See next page for specifications.)
Our smaller units, available with either wheel or airblast
systems handle a broad spectrum of media and
fit profitably into cell stations and other operations
compatible with batch processing.
These rugged machines automate cleaning, peening,
deburring, profiling, finishing and many other surfaceconditioning
tasks on a vast range of parts.
Plus they are simple to operate. The operator loads
parts onto a rugged perforated belt, closes the loading
door, sets the timer and pushes the start button.
By tumbling parts within the blast envelope, these
machines deliver consistent results automatically
whether working intermittently or non-stop in a
multi-shift production facility.
View Complete Details

FLADDER DEBURRING MACHINE

  • Diameter 150, 250, 300, 350 or 400 mm
  • size P100, P150, P180, P220 or P220
Fladder Danmark AS is established
by Hansen & Hundebl who
in the 1970s started a development
centre designing unique
methods and finishing machines
for the wood and metal industry.
Today FLADDER is a known and
acknowledged trade mark of high
quality.
The target is designing, producing
and marketing efficient machines
and tools able to meet specific
work processes in an effektive and
reliable way.
View Complete Details

CONTINUOUS PROCESSING

  • diameters 36 inches , 108 inches
Empire offers turntable and in-line machines for
continuous processing. These systems can be loaded
and unloaded manually, equipped with robotic arms
or designed as an integral part of the production line.
Our continuous turntable machines come in
four standard models with table diameters ranging
from 36 inches up to 108 inches. Larger units are
available with two rotary blast heads. The heads can
be oriented to perform separate functions, such as
blasting the interior and exterior of parts at the same
time. Standard features include a rubber cabinet
lining and a urethane coating on the turntable for
extended service life.
View Complete Details

AUTOMATED SHOT-PEENING MACHINES

Empire continues to develop air-blast peening systems
with advanced computer-control, blast-coverage and
material-handling features that not only increase productivity,
but also assure repeatabilitya major concern
in these quality-intensive applications affecting
the structural integrity of critical components.
Interface terminal
enables operator to
designate blasting
parameters such as
nozzle stroke length
and oscillation speeds,
ONOFF status of
selected nozzles, part
rotation speeds, and
blast duration by simply
inputting the appropriate
part identification
number.
Glass-bead system for peening jet-engine turbine
blades incorporates vertically oscillating nozzles, a
vibratory bead classifier, and one rotating work station.
View Complete Details

BATCH PROCESSING

  • Size 60-inch
batch processing systems, which include both
continuous and indexing turntable machines, are ideal
for parts requiring long blast cycles. In the typical
work scenario, the operator loads work pieces onto
the turntable, sets the timer, starts the machine and
returns when the cycle is completed. By adding a blowoff
manifold and timer, which automatically remove
residual material from the part and turntable, the
operator is freed from the often dusty task of manual
blow-off.
Empires PF-4848-RS with a 36-inch turntable,
our PF-6060-RS with a 48-inch turntable and the PF-
7272-RS with a 60-inch turntable feature rotating blast
guns that assure even coverage. Blast-head and tablerotation
speeds are both variable to meet a wide range
of production requirements. Rotary blast heads for these
machines are available with four, six or nine blast guns
View Complete Details

High-Production Systems Cartridge Collectors

  • Size 40”x 65” x 150”
Designed for dust collection with high-production equipment
such as automated air-blast systems, these EM cartridge collectors
increase air flow, provide more filtration area and clean filters
automatically.
The filter-cleaning system features a photohelic gauge
provided as standard equipment. This unit responds to high
and low set pointsmeasured in terms of pressure differential
across the filtering materialto activate the jet-pulse cleaning
process. Once the pressure limits have been set, these collectors
essentially clean themselves.
View Complete Details

Rotary Heads

Empires rotary blast head delivers tremendous
coverage while conserving compressed air. When the
application calls for it, our rotary head will outperform
any horizontal-nozzle oscillator, including our own,
by reducing the number of blast guns and energy
required for the job. Our rotary heads contribute to
the outstanding performance of our in-line conveyor,
continuous turntable and batch turntable machines.
To process flat parts uniformly, a horizontal oscillator
extends the reach of the rotary head shown above.
With the addition of the oscillator, the single six-gun
head provides even blast coverage and consistent
finishing results from the center to the circumference
of the systems 48 powered turntable.
Adjustable blast-head clearance and nozzle angles,
combined with variable head and turntable speeds,
not only make Empire rotary-head machines versatile;
they also assure precise control of cleaning and
finishing processes.
View Complete Details

Wire Mesh Belt Blasters

  • widths 12"
Versatile, rugged systems that deliver consistent, repeatable results
Easy to install, simple to operate
Gibson Wire Mesh Belt Blasters offer the ability to utilize a blasting machine in conjunction with another
machine to automate a process reducing high labor costs normally associated with batch type blasters.
They come in many belt widths beginning with our 12" wide belt and are offered in larger widths. They
also come with multiple blast wheels and horse powers with a level of speed and efficiency unmatched
by other equipment manufactures.
Gibson produces these flow through type units in many different sizes and configurations and can be
customized to accommodate your blasting needs.
The operator or robot loads parts onto a manganese mesh belt while the blaster does the work, with no
need for opening and closing doors. By flowing these parts within the blast envelope, these machines
deliver consistent results automatically while working non-stop in a multi-shift production facility. May
require an additional operator depending on how the process is organized.
These rugged machines can automate your process whether you are just cleaning or removing flash
from die-cast parts this is a great option for automating and streamlining your shot blast process. .
View Complete Details

LONG RADIUS FINISHER

  • Model Number VTG-5LR
  • Diameter 55" 68" 92" 116" 124" 136"
Since 1965, the founders of CLM VIBETECH, Inc. have
produced, serviced, repaired and restored Vibratory Equipment.
Drawing on the experience from working on almost every brand
of vibratory machines, CLM VIBE TECH Inc. has designed a full
line of vibratory equipment using the best features available
in todays industry. As a customer said after seeing all the brands
in the plant for repair, Looks like you build the best and fix the
rest. That statement is very true. From the inside out our
machines are built with experience.
Industrys best designed and proven oil lubricated
drive system incorporates double-row spherical
bearings, large heavy-duty shaft and a thick-walled
cartridge. (Grease lubrication system on small
capacity models.)
All heavy-duty welded construction.
Minimum 1" thick premium polyurethane lining
(three grades available including hot pour).
Exterior mounted components provide easy
access for maintenance and service.
Extra large springs for durability.
Control panels are built to our customers
requirements, from simple push button starters to
fully automated PLC controls with digital displays.
View Complete Details

ROUND BOWL FINISHER

  • Model Number VTG-2810
  • BOWL DIAMETE 28"
The vibratory finisher is the most common
and versatile of all mass finishing styles of
equipment. The VibeTech finisher comes
is sizes ranging from 1 to 100 cubic feet,
available with or without internal separation,
and comes with a variety of pre-engineered
options or can be a part of a fully automated
work cell. The vibratory drive at the center
of the machine creates a toroidal motion in
the bowl, which is a spiraling roll of media,
parts, and solution. Two different motions
are happening to finish the parts. The first is
that the parts are rolling and sliding across
the media which is a tumbling action. The
second is that the machine is vibrating
at 1, 450 RPM, which is lapping the parts
quickly to give a finer and more complete
finish than classic tumblers. If bought with
internal separation then the true benefit of
this equipment is realized when parts are
separated from the media when the desired
result is achieved.
The versatility of this machine is almost
infinite. With amplitude and lead angle
adjustments, optional variable frequency
drives to adjust speed, and thousands
of media and compound choices, the VTL0004-00
VT Vibratory Finisher
process options are endless. Whether
you are: deburring heavy stampings,
smoothing fine china, polishing bullets,
removing machining lines from aerospace
components, descaling heat treated parts,
or removing heat marks from laser cut parts,
almost every manufactured component can
benefit from a vibratory finishing process.
View Complete Details

TUB FINISHER

  • Model Number VTHT-1724
  • Width 17.5
  • Length 24
Tub finishers (or trough vibrators)
are versatile finishing machines for
medium to large parts. Most processes
involve allowing parts to rotate freely
within the mass. Based on cubic foot
capacity no other style gives you the
channel width of a Tub finisher.
Parts requiring little or no part on part
impingement (contact damage) can
be easily separated with removable
compartment dividers. The location of
the dividers can be customized to suit.
Typically delicate or high dollar parts
are segmented with dividers to ensure
a precise surface finish and batch
integrity (or traceability).
The heavy-duty, interlocking structural
design forms a U-shaped trough, with
a premium poly-urethane (multiple
grades of shore hardness available)
lining and drain(s), mounted on coated
coil springs, and a thick-wall tubing
base frame. The drive consists of a
premium efficiency motor driving an VTL0001-00
VTHT TUB FINISHERS
offset drive shaft with easily adjustable
weights, to increase or decrease the
aggression of the machine. In large
machines universal joints are used to
link motor to drive shaft and in longer
machines they are used to link multiple
drive shafts together.
View Complete Details

Vacuum Recovery Systems

  • diameters 18, 24 or 30 inches
Empires Vacuum Recovery Systems (VRS) quickly
and economically recover media to all Empire
SuperBlast portables, as well as other pressure
pots with diameters of 18, 24 or 30 inches.
These pneumatically powered systems convey as
much as 140 pounds of A-36 aluminum oxide per
minutemore than 8, 000 pounds an hourup
a nine-foot lift with 200 cfm of air at 100 psi.
Standard models, using only 100 cfm, are available
for less demanding applications.
Empire Vacuum Recovery Systems feature
rugged welded construction and a durable finish.
Standard equipment includes: Storage hopper
with viewing window High-velocity venturi head
Two-inch adjustable carburetor Floor-load
hopper with trash screen Two-inch inlet and outlet
connections Options are available for pull-chain Empires Vacutrans, a high-velocity venturi
head, enables retrieval of media at rates exceeding
8, 000 pounds per hour. Optional silencers and
exhaust-hose extensions are available for sound
attenuation.
View Complete Details

BLAST RECOVERY SYSTEMS

  • pressure 650
With Empires pneumatic blast and recovery system
(PRS), you can tap the cost-saving advantages of
more durable media for only a modest investment.
The PRS lets you move up to recyclable media such as
aluminum oxide, chilled iron and steel grit, which can
be used effectively over and overfrom 6 to 200 times.
Conservative studies show an investment in a PRS is
recouped in as few as ten weeks in terms of reduced
costs for replacement media, disposal of spent media
and man-hours required to move this material around.
After that, years of higher profits lie ahead. The PRS relies on an exclusive cyclonic media
reclaimer, which extracts good, reusable media from
unwanted dust and debris. As a result, you get consistent
performance from your media cycle after cycle. The PRS incorporates a SuperBlast 650 pressure system
with 780 remote controls for ease of operation and
maintenance. A dust collector, which captures 99% of
particles one micron in size, permits conveying air to be
recirculated into the workplace, thereby reducing HVAC
costs. The systems 10-horsepower blower extends effective
work area and recovers media at rates exceeding 70
pounds per minutes. These units handle media sizes up
to A-12 aluminum oxide and G-25 steel grit.
View Complete Details

Wide Belt Sanding Machines

  • widths 37", 43” and 52"
Midwest Automation manufactures a variety of wide belt sanding machines offering superior
results, easy operation, and dependable service at competitive prices. Made in USA, machines
include the Patriot 2 line of wide belt sanders with one, two and three head confi gurations for
8 to 16 hours of operation per day where fewer passes are required to achieve the desired results.
Bottom line? We help you sand better, increase productivity, and improve quality.
View Complete Details

Hanger Blast System

  • Capacity 500 lb
  • Standard Machine Height 170 in
  • Standard Machine Weight 8300 lb
Gibson spinner hanger blasting systems provide a cost-effective solution to batch cleaning. They are designed and built for ease of use and
efficiency.
Standard Blast Wheel HP Two-7.5 HP
Blast Wheel Upgrade Options Two-10 HP
Single Air Wash Separator 20 in
Low Abrasive Indicator Standard
Initial Abrasive Fill 1000 lb
Standard Hanger Capacity 500 lb
Dust Collector CFM Required 2000 CFM
Rotary Screen Optional
Optimal Blast Area Diameter x Height 36 x 36 in
Pitless Design Yes
Standard Machine Height 170 in
Standard Machine Width 156 in
Standard Machine Depth 117 in
Standard Machine Weight 8300 lb
Noise level 85 dB
View Complete Details

Big Clem Bulk Blasters

  • Model Number P-100
  • Diameter 12” , 16”
Econo-Blast portables are compact pressure blasters
that share many features with their big brother,
SuperBlast. Available in three sizes with grit capacities
of 1, 1.5 and 3 cubic feet, these portables include
ASME vessel certification for safety, flexible air hose
for ease of maintenance, wheels for portability and
a pressure gauge. Less grit capacity and smaller nozzles
make these units ideal for spot blasting and detail
work, particularly on a limited budget.
Larger Econo-Blast models can be equipped with
Empires patented Sure-Flo grit valve and 680 or 780
remote controls, described on page 9, for safety. With
these controls, blasting stops when the nozzle is released.
Complete packages are available to protect the
operator from blasting and potentially hazardous
dust per OSHA requirements. Further, these packages
include all the blasting equipment and accessories
necessary to get you up and running safely.
XL Packages offered with 150 and 300 models contain
the following items:
Air-fed respirator helmet with 50 helmet lenses
Personal air filter
25-foot starter breathing hose
25 feet of blast hose with couplings
DC3-3 Di-Carb nozzle
Package of ten coupling washers
Package of 10 nozzle washers
Using a 316 nozzle, Econo-Blast portables require
only 38 SCFM at 80 psi and can be equipped with smaller
nozzles to accommodate smaller air compressors.
View Complete Details

ACCUSTRIP SYSTEM

  • Dimensions 25"L x 18"W x 42"H
  • Capacity 50 lb.
The Accustrip System is designed for use with ARMEX
Blast Media, a formulated sodium bicarbonate abrasive.
This environmentally friendly process is ideal for industrial
cleaning, architectural cleaning, graffiti removal, cleaning
and deodorizing fire, smoke and mold damage, and paint
removal. Simple operation and a maintenance-friendly
design make the Accustrip System easy to use and easy to
own. A selection of nozzles is available for applications
ranging from stripping delicate substrates and cleaning
applications to paint stripping and corrosion removal.
FEATURES AND BENEFITS
Versatile system used for general maintenance, cleaning, degreasing, graffiti removal,
depainting and other surface preparation
Gentle but effective process safe for use on virtually any surface: brick, limestone,
concrete, granite, metal, glass and tiles1
Uses ARMEX nontoxic, nonhazardous* and nonsparking media
Streamlined piping provides more efficient air usage and ease of maintenance
Moisture separator, moisture eliminator and water trap pop-up valve keep blast media
flowing smoothly. Optional AirPrep system (air dryer or aftercooler) available
45 cone provides optimum media flow
Gauge console allows for easy monitoring of all blast parameters
Available with Thompson Valve II abrasive metering valve or ARMEX Media Valve
View Complete Details

Dual Chamber Spinner Hangers

  • Loading Capacity 125 to 2, 000 pounds
Speed batch blasting of sensitive parts
Deliver 360 workpiece coverage
Continue working during loading
Gibson Spinner Hangers provide an ideal solution for batch blasting many types of parts too fragile or
awkward for other methods of automated finishing. These systems play a profit-boosting role across a
broad range of metal intensive industries by improving quality and efficiency during the cleaning,
peening, prepping and finishing of almost any workpiece suitable for mounting on hooks.
Our systems include two work chambers mounted on an indexing turntable. As the turntable steps
through programmed positions, one chamber exposes parts to a contained blast stream emanating from
high-efficiency wheels while the other opens to the operator, who loads and unloads parts from the uncontained
chamber. To assure uniform coverage, a spindle rotates the hangers within the working
chamber's blast envelope.
Like all Gibson systems, our Spinner Hangers are easy to operate and install. Plus, they deliver consistent
results whether working intermittently or non-stop in a multishift production facility.
PLC programming assures repeatable performance cycle after cycle, and cast liners on work-chamber
walls extend equipment life. Hanger capacities from 125 to 2, 000 pounds fit most applications.
View Complete Details

Hanger Table Blast Systems

  • Diameter x Height 60 x 72 in
  • Capacity 1500 lb
Gibson spinner hanger blasting systems provide a cost-effective solution to batch cleaning. They are designed and built for ease of use and
efficiency.
Standard Blast Wheel HP Three-15 HP
Double Air Wash Separator Two-30 in
Low Abrasive Indicator Standard
Initial Abrasive Fill 6000 lb
Standard Hanger Capacity 1500 lb
Dust Collector CFM Required 4000 CFM
Rotary Screen Standard
Optimal Blast Area Diameter x Height 60 x 72 in
Pitless Design Yes
Standard Machine Height 18 ft 2 in
Standard Machine Width 9 ft 6 in
Standard Machine Depth 10 ft 7 in
Standard Machine Weight 15000 lb
Noise level 85 dB
View Complete Details

Wet Blasting

  • Model Number WT36RP
  • Dimensions 36” x 36”
The Wet Tech process uses a water and media slurry driven by our
proprietary high volume pump with regulated compressed air across
the surface for your own application.
Your Advantage. You benefit by eliminating manual or dry
blasting and the use of chemicals and their disposal, as well as the
combination of simultaneous applications.
Our Commitment. Wet Techs products processes are the result
of listening to our customers. Our innovative engineering and non
corrosive materials provide our customers highly durable and low
maintenance processes. Through our global network of distributors,
you receive a high level of support along with a more efficient surface
finishing process.
View Complete Details

POLISHING LATHE

  • Model VSH - 1500
CONTACT WHEEL AND BELT ATTACHMENT
This accessory, as shown in the picture at the right offers advantages over
the typical method of mounting the idlers on the floor.
Because the contact wheel, backstand idlers and guards are all mounted
to a support frame that is secured to the base of the machine, it is possible
to move or relocate the lathe without remounting or realigning the idlers.
The Contact Wheel and Belt Attachment can only be supplied if ordered at
the same time as the polishing lathe.
Available with Spring Tensioned idlers or Air Tensioned idlers. The Air
Tensioned idlers are recommended for belt speeds of 7500 SFPM and faster
due to larger diameter pulleys.
GUARDS
All polishing and sanding wheels must be guarded to protect the operator. Operating without guards may lead to serious
injury. This is stated in a warning sign attached to every machine. G&P offers guards as listed below. Prices for guards will be
supplied upson receipt of details of the application.
View Complete Details

AGITATION IMMERSION Dunk Wash Machines

  • capacity 125 lb. and 200 lb
Ultrasonic cleaning is a result of high frequency sound
waves introduced into a cleaning liquid by means of a
series of transducers mounted to the cleaning tank. The
sound travels throughout the tank and creates waves of
compression and expansion in the liquid. In the compression
wave, the molecules of the cleaning liquid are tightly
compressed together. Conversely, in the expansion wave,
the molecules are rapidly pulled apart. The expansion is
so dramatic that the molecules are ripped apart, creating
microscopic bubbles. The bubbles are not seen by the naked
eye since they are so small and exist for only a split second of
time. The bubbles contain a partial vacuum while they exist.
As the pressure around the bubbles becomes greater, the
fluid around the bubble rushes in, collapsing the bubble very
rapidly. This violent collapse, combined with the liquid jets
velocity, provides a very intense cleaningscrubbing action
in a minute area. This scrubbing action exists throughout
the cleaning bath. When utilizing detergents designed for a
specific application, a synergistic cleaning action is produced.
View Complete Details

Cartridge Collector

  • Operating Temperature 150°F/66°C
The breakthrough performance of the Downflo Evolution (DFE) family of cartridge dust collectors is the result
of Donaldson Torits relentless drive to improve its products and exceed customer expectations. Donaldson
Torit put decades of industry experience to work to produce a new, best-in-class dust collector capable of
reducing equipment size and number of required filters by up to 40% compared to a typical cartridge collector.
A smaller collector helps lower the initial purchase price, reduces filter replacement costs, and opens up
valuable manufacturing floor space.
This state of the art collector, coupled with Donaldsons industry-leading Ultra-Web nanofiber filtration
technology, is truly an intelligent design.
View Complete Details

SuperBlast Portables

  • Model 350
  • Diameter 18” 24”
Simplicity, safety, reliability and performancethose
were our design goals when we engineered SuperBlast
Portables. Many years on tough jobs, such as removing
corrosion, preparing surfaces for coating and maintaining
heavy equipment, have proved that SuperBlast Portables
deliver unmatched performance and exceptional value.
A look at the features highlighted above will show you
that SuperBlast Portables are made of the right stuff.
These rugged systems are the product of ingenuity and
experience; they combine a host of standard features
designed to boost productivity and profits. In addition,
they can be ordered in a variety of configurations, including
your choice of pneumatic or electric remote controls, a
complete OSHA package and a full line of accessories.
SuperBlast makes short work of big projects; and
performs small jobs in a snap. For the best blasting results,
nothing beats SuperBlast.
View Complete Details

THRU FEED Machines

  • Model V1472TF
  • Length 6 ft.
  • Width 14"
Almco thru-feed machines are integrated with media handling
systems including an oscillating parts-media separator. Which
features a secondary fines screen deck for continuous removal
of undersized media and a media return conveyor for complete
automatic processing of high production parts.
Thru-feed machines are ideally suited for high volume, short-cycle
de-burring and finishing of castings, stampings, and forgings.
These machines are excellent to incorporate with optional
automatic parts load and unloading mechanisms for increased
efficiencies.
Parts may be fed into the machine at short intervals, direct from
preceding operations. Systems are ideally suited for incorporating
washer, dryer, or rust inhibiting operations.
Machines may also be equipped to process parts using steel,
ceramic, or plastic media.
View Complete Details

VIBRATORY COMBO DRYER

  • Model VTG-3816C
  • diameter 48" 66" 66" 71" 80" 88" 96" 116"
Since 1965, the founders of
CLM VIBETECH, Inc. have
produced, serviced, repaired
and restored Vibratory
Equipment. Drawing on the
experience from working
on almost every brand of
vibratory machines,
CLM VIBE TECH Inc. has
designed a full line of
vibratory equipment using
the best features available
in todays industry. As a
customer said after seeing
all the brands in the plant
for repair, Looks like you
build the best and fix the
rest. That statement
is very true. From the inside
out our machines are built
with experience
Industrys best designed and proven oil
lubricated drive system incorporates double-row
spherical bearings, large heavy-duty shaft and
a thick-walled cartridge. (Grease lubrication
system on small capacity models.)
All heavy-duty welded construction.
Minimum 1" thick premium polyurethane lining
(three grades available including hot pour).
Exterior mounted components provide easy
access for maintenance and service.
Extra large springs for durability.
Most items needed for maintenance are available
locally or on our shelf. We have the fewest custom
made parts in the industry.
View Complete Details

FRONT LOAD CABINET WASHER

  • Diameter 30", 36"
  • Model RF-3036
FRONT LOAD CABINET WASHER
Heavy duty construction
Multi-stage units available
Pass through units available
View Complete Details

U Bend

  • Model RT-2400
  • DIAMETER 24", 30"
Stainless steel construction
Up to 5 stages
Highly efficient use of space
Several belt widths available
View Complete Details

CENTRIFUGAL BARREL

  • Series HZ
  • dimensions 34 X 30 X 30
CENTRIFUGAL BARREL
Finish parts up to 20 times faster than conventional vibratory
Optional screendeck for efficiency
Removable liners
View Complete Details

Mist Collector

  • Models DMC-MMA
  • Dimension 30.3 769.6 16.0 406.4 8.0 203.2 15.8 401.3
Dryflo mist collectors from Donaldson Torit
are effective and efficient mist filtration solutions,
providing a more productive work environment
by reducing coolant and machining oil mists
in a machine-mountable package. The Dryflo
provides high performance technology and
easy, predictable maintenance.
High performance three-stage filtration
improves collection efficiency at every stage
Provides a cleaner work environment for
maximum productivity
Reduces risk of mist related hazards
Quick and easy filter changesworkers
have minimal contact with collected oil
Predictable maintenance with a differential
pressure gauge
Lower plant maintenance costs
Mounts directly onto a machining center
to collect oil, water-soluble, semi-synthetic
and synthetic coolant
Low profile
10-year warranty
Helps support OSHA Clean Air Standards
View Complete Details

Fume Collector

  • Model Easy-Trunk
  • Dimension 28.0 711.2 40.9 1038.9 38.6 980.4
Compact, portable fume collectors effectively filter smoke, dust, and fumes from welding
and grinding applications.For heavier duty or more frequent
plant operations
Built-in pulse filter cleaning system
Push buttons conveniently located on front of
unit andor on fume hood
Ultra-Web nanofiber filters provide high MERV*
15 filtration efficiency per ASHRAE 52.2-2007
Plug and go operation
Fits easily through standard doorway
PORTA-TRUNK COLLECTOR
For light duty or infrequent plant operations
Static (non-pulsed) filter system
Operating controls conveniently located
on fume hood
Ultra-Web nanofiber filters provide high MERV*
15 filtration efficiency per ASHRAE 52.2-2007
Plug and go operation
Fits easily through standard doorway
View Complete Details

Down Draft Table

  • Model DB-2000
  • Weight 980lb
Self-contained dust collector bench used in grinding and finishing operations.Powerful downward airflow effectively
captures dust and fume
Even air distribution provides effective
dust control over the entire work surface
Hinged side-wing panels open to
accommodate longer workpieces
Built-in fluorescent light illuminates work area
Ergonomically designed for operator comfort
Fibra-Web FR filter cartridges featuring nanofiber
technology provide high filtration efficiency and
long filter life
MERV* 14 filtration efficiency rating
per ASHRAE 52.2-2007
Provides a cleaner work environment for
maximum productivity
Helps support OSHA Clean Air Standards
Quiet operation
View Complete Details

DYNABRADE ABRASIVE POWER TOOLS

  • Size 1/8-1/2 (3-13) W x 24 (610) L
World-famous 14000 Dynafile replaces tedious hand-sanding and
filing in an endless array of applications. Tool above is powering
optional 11237 Contact Arm, ideal for working in areas as small as
38" (10 mm). This arm is also utilized for turbine blade grinding,
blending and polishing.
View Complete Details

Monorail Blast System

The Gibson monorail blast system is a fully automated blast system designed for 24 hour production.
Systems are typically used in applications blasting heavier parts at a high rate. Blast systems are easily
integrated into the rest of the production flow such as paint lines.
Gibson monorail blast systems offer the ability to utilize a blasting machine in conjunction with another
machine to automate a process reducing high labor costs normally associated with batch type blasters.
They come in many different blast envelopes. They also come with multiple blast wheels and horse
powers with a level of speed and efficiency unmatched by other equipment manufactures.
Gibson produces these flow through type units in many different sizes and configurations and can be
customized to accommodate your blasting needs.
By flowing these parts within the blast envelope, these machines deliver consistent results automatically
while working non-stop in a multi-shift production facility.
These rugged machines can automate your process whether you are just cleaning or removing flash
from die-cast parts this is a great option for automating and streamlining your shot blast process.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Midwest Finishing Systems, Inc.)
  • Hartland, WI 53029, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/midwest-finishing-systems-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457984{main}( ).../index.php:0
20.01842192264include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02822914888include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03353850592header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice