Minnesota Autoclave

Air filter for the Statim 2000 air compressor. Fits all 2000 models. Use: Replace every 6 months or 500 cycles, whichever comes first. Attention: This filter is located under the round metal cover on the air compressor. To replace the filter, you will need to remove the cover with a Phillips screwdriver.

Intuitive display and simple prompts for easy operation Automatic-open door Four pre-programmed sterilization cycles: Unwrapped, Pouched, Packs and Handpieces Programmable controls allow you to change exposure time, temperature, dry time and vent, and store your changes if desired Steam-Flush Pressure Pulse Air Removal System designed to ensure proper steam penetration LCD display alerts operator if door is not closed completely or reservoir water level is low Reservoir fill port and drain tube located in the front of the unit for ease of draining and filling

• Weight80 lbs
• Overall Dimension28 x 22 x 16 in

Cassette seal for Statim 5000. Use: Replace every 6 months or 5000 cycles, whichever comes first Attention: We only sell authentic OEM cassette seals, which are green in color. Our technicians DO NOT recommend the use of after-market seals, which are black in color. Follow directions carefully when replacing seal. Poorly installed cassette seals are a leading cause of Statim failure.

• Weight80 lbs
• Overall Dimension22 x 17.8 x 7.1 in

Use: Protects the Statim’s internal components by keeping debris out of the reservoir. Minnesota Autoclave strongly recommends that all Statim owners use this filter. Instructions: Replace as needed (if water backs up when filling the reservoir, it’s time to replace the filter)