Post Buy Requirement
MP
United States
Add Review

Other Products / Services

LED Clear Mini Clearance

Sealed, 2-diode clear lens mini LED marker light.
9-16 volt operating range.
Hard-wired with separate lead and ground wire.
"-BT2" lead wires are terminated with .180 bullets.
Meets DOT requirements for clearanceside marker lights.
Optional chrome bezel available, B168-10.
Optional aluminum guard available, B168-092.
Optional B168-09 bracket retrofits to 1-18" centers.
Mounts on 1-1516" centers; optionalB168-09 bracket allows for mounting on wither 1-1516" or 1-18" centers.
View Complete Details

LED Multi-Color Accessory Light

Compact light fits 34" hole.
Multi-colored LED lights available in 7 different colors - blue, green, purple, white, pink, yellow and teal.
Hardwired with two 8" wires.
9-16 volt operating range, 9-32 volts for "-MV" multi-volt units.
Compatible grommet or bracket required for installation.
Not for exterior use on road-legal vehicles.
View Complete Details

Clearance

5-Diode, Round, 2-12" sealed LED combination light functions as both clearance and side marker light when mounted on a 45 angle.
Use 143-18 grommet for PC-rated installation.
Accepts industry standard 2-prong plug.
9-16 volt operating range, 9-32 volt for "-MV" multi-volt units.
Available for grommet mount, flange or surface-mount. Flange sonic welded to form a single unit.
Available in amber or red.
163KA & 163KR kits include LED light, 143-18 grommet and 162-49 plug.
View Complete Details

Led Clearance

2 diode LED clearance and side marker light.
Hard-wired.
Integrated retro-reflector.
OE replacement light for Knapheide truck bodies.
Sealed lens and housing.
Flush mounts to vehicle.
White and black grommets available.
Viz-pack kits contain light and white grommet.
View Complete Details

Outline Lights

Low-profile, sealed design with reflective lens.
1200C has two diodes, 1200A and 1200R have three diodes.
Front & rear outline markers certified to ECE Regs 7 & 3.
Side marker certified to ECE Reg 91 3.02 for horizontal & vertical mount.
Fit optional horizontal and vertical mounting brackets.
Chrome accessory bezel available.
Hardwired design has 12" (300mm) sheathed leads.
932 volt operating range.
Meets IP67 ingress level.
1200-09H & 1200-09V does not include lights.
EXPORT ONLY!
View Complete Details

Sealed Compact Side Marker

Sealed, 2-diode LED marker light with Superior Optics.
Multi-volt design9-32 volt operating range.
Hard-wired design features sheathed, stripped leads.
Certified to ECE Reg 91.
Meets IP67 ingress level.
Optional chrome bezel available, B168-10.
Rugged aluminum guard bracket available, B168-092.
B168-09 will retrofit 1.125" (29mm) centers.
EXPORT ONLY!
View Complete Details

LED Combination Marker Light

2 diode LED clearance marker light meets DOT lighting regulations as both amber front clearance and red rear clearance light.
Works with all 12 volt systems.
Hard-wired terminals are potted in polyurethane.
Designed to mount on top or side of fender at widest point of trailer.
Ideal for boat, cargo and horse trailers.
Mounting bracket and plug required for installation.
Can be configured with 2-wire plug, or with B154-11K bracket that grounds through mounting screw.
View Complete Details

LED Sealed Compact Side Marker

Sealed, 2-diode LED marker light except 1268A-MTC, which is four diodes.
Superior Optics.
Multi-volt design9-32 volt operating range.
Hard-wired design features sheathed, stripped leads.
Certified to applicable ECE and ADR regulations.
1268A-MTC meets ECE Reg 6, Cat 5 for supplementary side direction indicator and comes equipped with 2.5 meter leads
Meets IP67 ingress level.
Optional chrome bezel available, B168-10.
Rugged aluminum guard bracket available, B168-092.
B168-09 will retrofit 1.125" (29mm) centers.
EXPORT ONLY!
View Complete Details

Multi-Color Accessory Light

Compact light fits 34" hole.
Multi-color diode can light up in six colors plus white.
Hardwired with four 8" wires: 1 common power wire plus 3 separate ground wires to control red, green and blue power.
Compatible grommet or bracket required for installation.
Not for exterior use on road-legal vehicles.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Mission Plastics North)
  • Grandview, MO 64030 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/mission-plastics-north/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0007457984{main}( ).../index.php:0
20.02072016072include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.03232738680include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03903674376header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice