MS Kennedy Corp.

Low Cost Dual Amplifier Monolithic MOS Technology High Voltage Operation : 350V Low Quiescent Current : 2mA Max Per Amplifier High Output Current: 60mA Minimum Per Amplifier No Secondary BreakdownHigh Speed : 40VµS Typ The MSK 103 is an ultra high voltage monolithic MOSFET operational amplifier ideally suited for electrostatic transducer and electrostatic deflection applications. With a total supply voltage rating of 350 volts and 60mA of available output current available from each amplifier, the MSK 103 is also an excellent low cost choice for high voltage piezo drive circuits. The MOSFET output frees the MSK 103 from secondary breakdown limitations and power dissipation is kept to a minimum with a quiescent current rating of only 2mA per amplifier. The MSK 103 is packaged in a hermetically sealed 18 pin ceramic dip which has external compensation pins for each amplifier.

Single Supply Operation From 10V to 45V Replaces NHDH0008 'And' Input Logic With Expander External Transition Time Control Output Current to 3A Peak Available to DSCC SMD 5962-87617The MSK 0008 is an integrated high voltage, high current driver designed to accept standard DTL or TTL logic levels and drive a pulsed load of up to 3A at 28V. AND inputs are provided along with an Expander connection, should additional gating be required. The addition of an external capacitor and resistor provides control of the rise and fall times of the output. The device is packaged in a hermetic 10 pin can.

Manufactured using Space Qualified RH1013 Die MIL-PRF-38535 Class V Processing & Screening Total Dose Tested to TBD Krads(Si) (Method 1019.7 Condition A) Single Supply Operation Low Offset Voltage Low Drift Available in Straight or Gull Wing Lead Form Contact MSK for MIL-PRF-38535 Qualification and Radiation StatusThe MSK 114RH is a radiation hardened quad operational amplifier for use in space and severe military applications. This device offers low offset voltage, low drift, low offset current and high gain combined with a space efficient 14 pin surface mount flat pack. The MSK 114RH is an ideal solution when multiple precision amplifiers are required and board space is at a premium. The MSK 114RH 14 pin ceramic flat pack is offered with straight leads or gull wing for surface mount applications

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

Low Cost Wide Supply Voltage Range: 5V to 40V High Output Current: 3A Minimum High Efficiency: Vs-2.2V at 2.5A Internal Current Limit Wide Common Mode Range (Includes Negative Supply Voltage) Low Distortion Internal Output Snubbers for Ultra-Stable OperationThe MSK 105 is a high power quad operational amplifier. Each amplifier is capable of delivering three amps of current to the load. The MSK 105 is an excellent low cost alternative for bridge mode configurations since all amplifiers are packaged together and will track thermally. The wide common mode range includes the negative rail, facilitating single supply applications. It is possible to have a "ground based" input driving a single supply amplifier with ground acting as the second or "bottom" supply of the amplifier. To maintain stability, output snubber networks have been internally connected to each op amp output (see "amplifier stability" in the attached application notes). The output stage is also current limit protected to approximately 3.0 amps. The MSK 105 is packaged in a space efficient 18-pin ceramic dip. Consult factory for other packaging options if desired.

Operates In Class AB Or Class C Mode Low Cost High Voltage Operation : 150V Low Quiescent Current : ± 8.0 mA Total Typ. In Class "C" Mode High Output Current : 5A Min. Per Amplifier No Second Breakdown High Speed : 27VµS Typ. External Compensation For Optimum Gain-Bandwidth The MSK 101 is a dual high power monolithic MOSFET operational amplifier ideally suited for high power amplification and magnetic deflection applications. With a total supply voltage rating of 150 volts and 5A of output current available from each amplifier, the MSK 101 is also an excellent low cost choice for motor drive circuits. The MOSFET output frees the MSK 101 from secondary breakdown limitations and power dissipation is kept to a minimum with a typical quiescent current rating of only ± 8.0 mA total in class "C" mode. Power saving class "C" mode is enabled by the user externally. The MSK 101 is packaged in a hermetically sealed 18 pin ceramic dip which has two external compensation pins for each amplifier.