N R D Industries

West Orange, United States

We are offering waterproofing plaster. we have admix kf-a or k100 its liquid version added to plaster or concrete provides completed oil impermeability see where penetrating of crude oil through the concrete wall of aqueduct was stopped by 3/4" or 18 mm thick layer. actually, we can supply ready to apply plaster or concrete for this type of projects but better to sell them admixtures. please allow us to introduce ourselves, we are kalmatron®, a super concrete additive that we believe has no equal in the united states or world-wide. n r d industries. Is the exclusive distributor of the concrete admixtures created by the kalmatron® company a non-exclusive distributor of the product worldwide. we work with our clients to find the best solution for all proposed contracts. our product line consists of over 15 differing solutions of our product, each designed for specific applications. we will look into your unique concerns and diagnose the best solution to rectify the problem, or in the case of protecting new concrete, we will help suggest which product will help increase the lifespan and lifetime durability of the structure. we conduct these evaluations free of charge because we are in the business of protecting concrete and believe it important to do the job right, the first time around. Unlike many of the other admixtures on the market, kalmatron® is not easily classified as a 'retarder, ' 'superplasticizer, ' 'accelerator, ' 'water reducer', ' or 'air entrainer' because our product upgrades concrete in a completely new and revolutionized way. to understand how we differ from the competition, it is important to know about the history of our supplier. when mixed or applied onto concrete, these kalmatron® solutions offer a host of improvements to the compound, including but not limited to: • waterproofing • increasing compression strength • protection against rebar corrosion and rust • protection from the seepage of engine and diesel oil • reducing the effects of carbonization • reducing penetration of chloride salts kalmatron® kf-αβγ radiation shielding material for x-ray attenuation and conservation of concrete and masonry structures as an additive into concrete/mortar mixes. kalmatron® kf-b protective & remedial compound for coating of concrete/masonry structures in a damp environment with penetration into protected material up to 6” or 150 mm for restoration of liquid/gas impermeability, vapor emitting, resistance to corrosions and structural density. Applies by brash, trowel or spray. kalmatron® kf-ecoat cementitious paint on concrete/mortar surfaces (at 0.9kg to 5kg/1m 2). kalmatron® kf-f versatile protective film provides impermeability and resistance to corrosion of concrete and masonry structures. Apply by spray/brush at 0.5 mm to 2mm thick with 2 to 3kg/m 2. kalmatron® kf-g concrete rehabilitation spray for renovation of concrete rheology by closing of shrinkage cracks, restoration of strength & impermeability by spray of 0.25 ÷ 0.35 kg of kf-g dissolved with 1 liter of water on 0.65 ÷ 1 m 2 of surface. kalmatron® kf-h anti decay shielding material for coating of timber, masonry & concrete structures to prevent microbiological decay. Applicable by brush, spray or trowel at 2.0 kg/m2. kalmatron® kf-i thermoresistant shielding material applicable as an admix to grouts applied as the coatings on the heat emitting sources such as equipment, roofs, pipes, chimneys, etc. kalmatron® kf-k road patching concrete designed for fast patching of rocky, masonry, concrete roads and floors by adding of 6 kg/m3 or 10 lbs/cy of kf-k to conventional concrete mix to increase viscosity and adhesion. ready for traffic in 1 ½ to 4 hours. patchcrete patchcrete is a pre-bagged cementitious coating with high viscous properties for concrete repair using the techniques of the spray, or painting by the brash, or rolling. Polishing after is an option as an enforcing treatment. It is no dilatation, free of shrinkage cracks and no curing with thicknesses at 1.5 mm to 5 mm or at 1/16” to ¼”. shieldcrete shieldcrete is a pre-bagged high performance concrete with high batch’ installment properties placing in concrete repair applications using the formwork method, shotcrete lining, and flatworks. It is no dilatation, free of shrinkage cracks and no curing after application with minimal range thickness at 8 mm to 50 mm or at 1/3” to 2”. plastcrete plastcrete is a pre-bagged cementitious coating with high viscous properties placing in concrete repair applications by the casting into the layer. Polishing after is an option as an enforcing treatment. It is no dilatation, free of shrinkage cracks and no curing after application with minimal layer thickness at 15 mm or ¾”. mr. Dilip shah n r d industries

• MOQ 1 Ton

We are offering kalmatron powdered, concrete admixture. N r d industries. Is the exclusive distributor of the concrete admixtures created by the kalmatron® company a non-exclusive distributor of the product. kalmatron® corporation has been established by the owners of patents, technologies, and trademark of kalmatron® products. kalmatronò kf-a admixture is a conceptually new product patented in the usa patents #5, 728, 208 and #5, 728, 428. It is an inorganic oxidizer of micro/macro metal elements contained in the cementitious materials providing electro-chemical decay of cement grain by electrolysis between inversely charged particles of electrolyte and cement grain. Decay-hydration reactions result in maximum volume of cementitious paste as a continuous solid phase in which the aggregates are embedded. kalmatron® kf-a is a chemically active admixture to cement‐containing mixes that increases the cementitious value and volume of cement grain. Kf-a is a powdered concrete admixture functioning as an inorganic oxidizer of micro-metal elements contained in the cementitious materials to provide extension of cement gel surface by decay-hydration of the cement grain from 100 m to 10 m. Kf-a is a cost‐effective solution that provides a transformation of conventional concrete mix to high performance concrete. Kf-a makes concrete strong and durable without the need of any other admixture and/or supplement materials or future applications. benefits cost reductions. For conventional concrete mixes, kf-a will solely replace the following admixtures and supplementary materials: o water reducers; o superplasticizers; o pozzalons; o silica fume; o fly ash; o membranes; o fine fillers; o fibers; o density and strength gainers.  dosage reduction of water at the rate of 10%-30% in conventional concrete mixes;  no surface preparation (remove loose materials);  high cement hydration;  yield of mixed batch is higher by 8% to 14% of cement gel.  early strengthening at 3rd to 7th day;  compressive strength is increased by up to 25%;  shrinkage is lower at 2 to 3 times;  exothermic heat is lower at 30% to 50%;  100% water impermeability at 2 inch concrete thick layer;  strong adhesion to any porous material;  works with concrete in ambient temperature range of -4f to 104f;  increased pumpability;  increased workability;  no shrinkage cracks;  no cracks, flakes, efflorescence and slid areas;  no bleeding;  highest resistance to chemical and climate corrosions;  highest freeze-thaw resistance;  mixing for up to 5 hours keeps concrete batch revived with approximately 20% slump reduction; however, workability will be the same;  no curing is required. please contact us at nrdindus@gmail.com for more information regarding the information mentioned above.