Post Buy Requirement
NB
United States
Add Review

Other Products / Services

MIDGET BUFFS

Midget Buffs are very small muslin buffs used for finishing in very small areas. Diameters in stock are from 78" to 2". These buffs are also available in other types of materials, such as denim or sisal.
View Complete Details

AIR COOLED BUFFS

Air Cooled Buffs sometimes referred to as "Ventilated" or "Airway", has pleated cloth and is held by a metal clinch ring in the center. Diameters run from 8" to 16" (even measurements only) with centers from 3" to 7", with adapters for various arbor holes. The amount of cloth in each section is designated by #2 and #4; the least amount of cloth being #2. The more cloth, the tighter and more aggressive the buff.
View Complete Details

BACKSTAND IDLERS

Speeds Production - Versatile adjustment affords ideal belt tension control for all kinds of work. Positive control of belt tension and tracking from operator's position avoids endless movement back and forth from contact wheel to idler.

Saves Belts - Tracking adjustment moves idler pulley from side to side instead of turning the pulley face avoiding twisting and stretching which can break the bond.

Tracks Narrow Belts - Holds belts of any width from 14" to 5" right where you want it! Pulley for 6" belts (optional)

Quick Belt Change - Tension release lever frees or tightens belt in a single motion.
View Complete Details

PLAIN SISAL BUFFS

The EOL (laminated) Sisal Buff is sewn with cotton fabric and sisal. This buff is used for cutting on all types of metal, but is less aggressive than the plain sisal buff.

The Plain Sisal Buff is made of burlap material. This buff is very aggressive and is used on all types of metals for course cutting. Both buffs are spirally sewn at 38", 14", and 18". These two types of buffs are available from 4" to 20" diameters.
View Complete Details

TREATED SISAL BUFFS

Treated Sisal Buffs are sisal buffs treated to make them very aggressive. The treated buff is indicated by color. The green buff being more aggressive than the yellow. Both for fast cutting down operation and even non-streak finishes. The red buff is the most aggressive of the three colors. Buffs are available in 4" and 20" diameters.
View Complete Details

MUSLIN BUFFS

Muslin Buffs are full disc cotton buffs used for coloring and finishing all types of metals. These buffs can be sewn spirally from 1 8 " to 3 4 "
and concentrically 12", 34", or 1 ". The closer the stitch, the harder the buff. Loose muslin being the softest with only one row of sewing around the arbor hole. These buffs are available in 20 ply (14" wide), 40 ply (12" wide), and 60 ply (78" wide). Muslin Buffs are available from 4" to 20" diameters. We also carry Yellow Treated Muslin buffs for slightly aggressive coloring.
View Complete Details

COTTON PIECED BUFFS

Cotton Pieced Buffs are made from pieces of denim and cotton material. These are used to polish all metals including aluminum, brass, steel, and stainless steel. Available from 4" to 20" in diameters
View Complete Details

OPEN FACE SISAL BUFFS

Open Face Sisal Buffs are constructed like the air cooled buffs, except they are made of a laminated sisal and cloth combination, and are available treated. Open face buffs are available in 12", 14" and 16" diameters.
View Complete Details

CENTERLESS BUFFS

Centerless Buffs are miniature airway buffs available in 6" and 8" diameters only. They come standard with a 1 34" arbor hole, with adapters available from 12" up to 1 14" arbor hole. They are available in white and yellow muslin material and are ideal for all smaller "coloring" operations.
View Complete Details

RAZOR EDGE BUFFS

Razor Edge Buffs are ideal to get into areas where no other buffs can reach. Tapered from the center to finish on a razor edge end, the buffs are available in 2 12" through 8" diameters, in unbleached cotton muslin or in the harder yellow treated material.
View Complete Details

GOBLET BUFFS

Goblet Buffs are made for buffing the inside of bowls, cups, mugs, lamps, etc., or any inside surface needing both the sides and bottom finished. Goblet buffs can come in various forms (round, tapered, square, or cylinder). Used with tapered spindles.
View Complete Details

BELLY PADS

Denim Aprons, Platers Aprons, and Belly Pads in 12", 14", 16", and 18".
Denim and plastic sleeves are also available for hand protection.
APRONS & BELLY PADS
View Complete Details

ACCESSORY CLEANING

Cleaning erasers, crystalion bricks, pumice stone, rake heads with handles, Scoth Brite pads, in various grits are also available for cleaning purposes
View Complete Details

Compounds

Black Stainless (SS-77, A-16) black bar for cutting;
17 -19bars per case. Red Jeweler's Rouge (7WS) dark maroon jeweler's rouge for very fine finishing; 22 bars per case. Green Chrome Rouge (C-3, C-311) green rouge for coloring; 17-18 bars per case. Brown-Red Tripoli (D-14, T-15) reddish-brown tripoli for cutting and coloring; 20 bars per case. White Crome Rouge (FW2) white bar for finishing all chrome metals; 18-19 bars per case. Learock Compound (#884, 9B52) #884 is a whitish-gray rolled bar for coloring; 30 bars per case #9B52 is a tan bar for coloring; 25 bars per case. Black Magic and Blue Moon brass and aluminum coloring compound; 24 bars per case.
View Complete Details

Deburring Wheels

These long-lasting, cool-running wheels feature additional abrasive grain that makes them ideal for deburring operations and polishing hard metals including automotive alloys.

Satin finishing, blending and decorate finishing are three operations performed with these wheels, which come in Very Fine, Fine, Medium and Coarse grit sizes based upon your desired finish.

Applications for these wheels include finishing stainless steel golf club heads, golf club shafts, watch case covers and satin finishing brass builder's hardware.
View Complete Details

Abrasive Belts

Abrasive belts are available in grits from 36 X to 400 J. The X belts are stiffer than J's because they have a resin backing while the J's have a glue backing, the X being more aggressive. Stock sizes of our belts are 2", 3", and 4" by 118". All other sizes available upon request
View Complete Details

Greases

White grease (G-1) known as wheel or belt grease. Brown grease (G-2) clean belt lubricant for abrasive belts; 25-30 tubes per case, known as wheel or belt grease. Yellow grease (G-8, G-14, G-15) known as wheel or belt grease. Greaseless Compound is used for satin finishing. Grits 60-300.
View Complete Details

POTS & GLUES

2-quart and 4-quart glue pots, hot (ground) glue, cold liquid S-glue, Gripmaster-glue. All used for setting up polishing wheels.
View Complete Details

Aluminum Wire

Both Copper and Aluminum Wire are in stock. The copper wire, used for wiring products to be plated, is available in 12, 14, 16, 18, 20, 22, and 24 gauges. It is sold by the roll or by the case. Each roll is 10 pounds, 6 rolls per case. The aluminum wire is sold in 12 pound rolls and is available in 8 (.1285), 11 (.0907), 14 (.0641), 16 (.0508), 18 (.0403), and 20 (.0320) gauge (numbers in parentheses represent nominal diameter in inches). The copper rod (not shown) is stocked in 18", 316", 14", 516", 38", and 12" in 12 ft. lengths.
View Complete Details

Machine Accessories

8" and 6" Flanges, 4" washers, lathe wrenches, brass nuts, tapered screw points, cap bolts, nut covers, and shaft spacers 12" to 4" long.
View Complete Details

Gloves

Gloves in Canvas, Leather, Terry Cloth, Hot Mill, Brown Jersey, and Black Rubber Latex. Elbow length, and Platers in rubber with cloth interior.

Other specialty gloves are available upon request
View Complete Details

Brushes

Brushes -Glue Brushes, Tampico and Black Nylon Platers Brush, Scrub Brushes, and Plater Swabs. Mini Brushes in steel and nylon are also available.
View Complete Details

Safety Gear

Safety Wear - Several styles of face masks, safety glasses, and ear plugs are available for protection. Head knit covers (not shown) are also available.
View Complete Details

Machine Parts

Belt Master and Toro pulleys available. Shaft guards, shaft bellows, removable shaft ends and hand spinners.

Buff and Belt Hood Covers for standard machines are available as well (Not Shown)
View Complete Details

FLANNEL BUFFS

Flannel Buffs come double nap, flannel on both sides, or single nap with flannel on one. Flannel is used when you desire a very fine finish on soft metals.
View Complete Details

Cartridge Rolls

Cartridge Rolls are a single piece, tightly wound construction, made of "X" weight Resin Bond Aluminum Oxide cloth. Cartridge Rolls provide an effective method of grinding, deburring, blending, polishing and finishing of metal channels, contours, recesses, side walls, and other hard to reach areas.
View Complete Details

Abrasive Grains

We also carry loose abrasive grains such as Turkish Emery and Aluminum Oxide, in grits 60 to 320 grit.

Whiting powder used for finished parts is available as well.
View Complete Details

SHAFTS / BEARINGS

BEARINGS - We have a wide selection of bearings for all types of polishing machines, both domestic and import in stock. Special sizes ordered upon request.

MACHINE SHAFTS - 3-piece polishing machine shafts with removable ends single piece shafts. Available in 54", 60", 72" sizes. Also available in single half shafts for the semi automatic wheel machines.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (National Buff Co., Inc.)
  • South El Monte, CA 91733 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/national-buff-co-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0012457960{main}( ).../index.php:0
20.02792048800include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.08172771472include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.08853707168header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice