Our Products

A shower pan liner waterproofing membrane used under full mortar bed installations of ceramic or terrazo tile, or dimension stone. Made from chlorinated polyethelene (CPE). Superior preformance. Guranteed for the life of the installation.

Features & Benefits

Will not rot, crack, or rust
Holds a crease - simplifies installation
Guaranteed for life
Impervious - lowest permeation rating
Meets plumbing code requirements

Overview
Reduces floor to floor impact noise created by walking, tapping, etc. on hard surface flooring like tile and hardwood floors. SIS is a composite sheet membrane made from an alloy of chlorinated polyethelene (CPE) with non-woven fabric laminated to both sides.

Features & Benefits

Thinnest system (364" thick) minimizes the need to alter door and cabinet heights and simplifies transitions between different types of flooring
Effective sound control (IIC=62, STC=59)
Single sheet system saves time and money
Insures uniform thickness and quality
Can also provide waterproofing and crack isolation

Overview
Protects thin-set tile from cracking by relieving the stress caused by horizontal movement in the substrate. Also, helps to preserve tile patterns by bridging control joints.

Features & Benefits

Single sheet chlorinated polyethelene (CPE) construction
Insures uniform thickness and quality
Tile immediately after installation
More than 15 years proven performance
Guaranteed not to rot or crack

Overview
Sheet membrane for thin-bed waterproofing and crack isolation for exterior applications with tile.

Features & Benefits

Provides waterproofing and protects tile from cracking
Sheet membrane minimizes variables in workmanship
Guaranteed not to rot, crack or deteriorate
No curing - install tile immediately
Use over concrete and some wood joist decks

ValueSeal is Noble's NEWEST, ultra-thin, cost-effective sheet membrane for interior waterproofing of floors and walls. Designed for bonded waterproofing applications in both residential and commercial construction. At 16 mils, it is Nobles thinnest membrane. ValueSeal has superior characteristics compared to other thin waterproofing sheet membranes on the market. Made from Polyethylene.

Features & Benefits

Available in 3' and 6' widths
Thin, lightweight, flexible
Holds a crease
For commercial and residential use
Can be applied with modified thin-set or NobleBond EXT
Seam using NobleSealant 150 or latex modified thin-set
Suitable for concrete and plywood substrates
Crack isolation
Translucent, easily see coverage of bonding agent
Plumbing code approved
10-year warranty
Made in U.S.A.
Available sizes:
3 x 33.3 = 100 sq. ft.
3 x 100 = 300 sq. ft
6 x 66.67 = 400 sq ft.
5" x 30' Cap Strip

Competively priced, superior alternative to liquid membranes for shower walls.

Features & Benefits

Sheet Membrane with better peformance than liquid membranes
Effective barrier to both water and vapor - .22 perms
Uniform thickness - minimizes workmanship variables
Bridges joints
No curing - saves time & money

A non-toxic* pre-mixed antifreeze and heat transfer fluid. The product is to be used in place of water and other water-like fluids in systems where freezing may either cause damage or interfere with the functioning of systems or equipment andor toxicity to humans or animals is a concern. NOBURST 100 is safe for use where contact with potable water is a possibility. Not for use in automotive systems or in systems containing galvanized pipe.

Active Ingredient: Propylene Glycol
Corrosion inhibitor
De-foaming agent
Essentially non-toxic
Generally Regarded As Safe
Applications

Hydronic heating systems
Ground water and earth coupled heat pumps
Air hydronic heat pumps and furnaces
Water-based heat extraction systems
Cooling systems and chillers
Refrigerating systems
Pipe tracing
Cooling towers
Industrial heat transfer
Plumbing winterization
Ice making machines
Snow melt systems
Fire hydrant winterization
Cooling coil defrosting
Immersion freezing
In-floor heating
NOBURST -100 is available in:

1-gallon plastic bottles (6case)
5-gallon plastic pails
30-gallon plastic drums
55-gallon plastic drums
275-gallon plastic totes
5000-gallon tank trucks

SUPER NOBURST is part of The Noble Companys complete NOBURST fluid care system for hydronic boilers and solar systems. With proper installation and annual inspection, SUPER NOBURST will protect systems from freeze damage and severe corrosion for 10 years. All ingredients in NOBURST non-toxic* and are Generally Regarded As Safe (GRAS) for use as food additives by the FDA*. NOBURST is safe for use wherever there is a possibility of contact with potable water. This product must NOT be used in automotive cooling systems or with galvanized metals containing zinc or aluminum.

Applications:

Hydronic heating systems
Solar heating
Ground water and earth coupled heat pumps
Air hydronic heat pumps and furnaces
Water-based heat extraction systems
Cooling systems and chillers
Refrigerating systems
Pipe tracing
Cooling towers
Industrial heat transfer
Plumbing winterization
Ice making machines
Snow melt systems
Fire hydrant winterization
Cooling coil defrosting
Immersion freezing
In-floor heating
Super NOBURST is available in:

5-gallon plastic pails
30-gallon plastic drums
55-gallon plastic drums
275-gallon plastic totes
5000-gallon tank trucks

verview
An antifreeze and heat transfer fluid for systems which contain aluminum components. NOBURST AL has inhibitor technology that is compatible with all metals commonly used in hydronic heating systems including brass, cast iron, steel, solder, copper and aluminum. The product is to be used in place of water and other water-like fluids in systems where freezing may either cause damage or interfere with the functioning of the system. NOBURST AL is not to be used in contact with or potential contact with potable water.

Features & Benefits

Use with all metals except galvanized steel
Special inhibitor package
Non-corrosive
High system efficiency
Blended with deionized water
Applications

Hydronic heating systems
In-floor heating

A sheet membrane that provides waterproofing and crack isolation for thin-bed installations of ceramic and stone tile. Made from chlorinated polyethylene (CPE). Guaranteed for the life of the installation.

Features & Benefits

Ideal for thin-bed shower waterproofing
Superior moisturevapor barrier
Protects thin-set tile from cracking
Guaranteed not to rot, crack, or deteriorate
No curing - install tile immediately
Use over common substrates