Post Buy Requirement
NI
United States
Add Review

Our Products

Solenoid Locking Metal Safety Switches With RFID

These switches are used on machines where the hazardous conditions remain for a while, even after the machines have been switched off, for example because of mechanical inertia of pulleys, saw disks, parts under pressure or with high temperatures. They can also be used when it is necessary to control machine guards allowing the opening of protections only under specific conditions. The mode 1 (active safety outputs with closed and locked guard) versions are considered interlocks with locking in accordance with ISO 14119, and the product is marked on the side with the symbol shown.
View Complete Details

Rope Pull Safety Switches Accessories

The installation is faster because only one screw is used for the fastening of every rope extremity, and the parts are prepared to ease the installation. Some practical tests have pointed out that the installation time is halved, reason for which it is named FAST.
The system is aesthetically pleasant, because thread parts (which sometimes tear operators dresses) and the rope extremities, usually fixed by heat-shrinkable sheath or adhesive tape, have been hidden.
The red plastic covers of the fixing parts have been developed also for the function of controlling the rope clamping. If the rope fastening screw is not fixed tightly enough, the cover cannot pass.
The rope is fixed without folds, thus reducing the rope stabilization time and the possible recalibrations of the rope tightening.
The system has been tested for correct function only if used with steel ropes of high quality like the ones Pizzato Elettrica usually supplies.
View Complete Details

Hinged Safety Switches For Extrusions

Pizzato Elettrica widens the own range of products making a new series of safety switches hinge-shaped named Palladio, where safety and style are melted in one single product. The switch is completely integrated in the mechanical hinge, to result practically invisible to an inexpert eye. This guarantees a higher safety because a switch hard to identify is consequently also more difficult to defeat. The assembly without visible screws and the pleasant line, make the switch perfectly integrated also with guards of modern design machinery.
View Complete Details

Two Hand Control Stations

The Control requires at least a synchronous action by both hands to release and maintain the operation of a machine or machine elements as long as there are dangerous situations, assuring in this way only the protection of this operator.

Description PCB3
Smelted-aluminum cover-part with a protection lid over each pushbutton.
Available with reserved holes for additional pushbuttons of 22.5 mm.
Delivered with an 20 mm ergonomic head tube made of polished stainless steel to facilitate the operation of the buttons from different positions.
Bottom base cast aluminum with central opening of 20090 mm for cables entries.
Prepared to be mounted directly on adjustable metal foot PRB05.
2 mm thickness rubber sealing between base and cover to protect the terminals against dust, oil and water.
IP65 protection with supplied pushbuttons.
Weight: 5Kg.
View Complete Details

DIN Special Assemblies

  • Number of contacts: 2 poles + earth /2/3 poles + earth
  • Conductor size: max. 1 mm2 DIN B
Base for DIN43650B and DIN43650C

Rectangular base for DIN43650B 2533 mm
Square base for DIN43650C 1717 mm
View Complete Details

Plastic Body Safety Switches

These safety switches are ideal to control gates, sliding doors and other guards protecting dangerous parts of machine. The stainless steel actuator is fastened to the moving part of the guard, so it is removed from the switch on every opening of the guard. The switch mechanism guarantees that removing the actuator forces the positive opening of the electrical contacts. Easy to install, these switches can be applied to any kind of protection (with hinge, sliding and removable ones). Besides, the possibility to actuate the switch only with its actuator guarantees that the machine can be restarted only when the guard has been closed. All products (except FW series) are equipped with a particular mechanical hooking that does not allow the separation of the head from the body during its positioning.
View Complete Details

Solenoid Locking Plastic Body Safety Switches

These switches are used on machines where the hazardous conditions remain for a while, even after the machine has been switched off, for example because of mechanical inertia of pulleys, saw disks, parts under pressure or with high temperatures. They can also be used when it is necessary to control machine guards, allowing the opening of protections only under specific conditions.
View Complete Details

M8 Connectors Distribution Boxes

  • Cable outlet: 3.5-5 mm
  • Cond. size: max. 0, 50 mm2
M8 malefemale connector, straight 180, 34 polesSafety, Automation and Connectivity
Solutions for the Industrial Marketplace
View Complete Details

Rope Pull With Reset Safety Switches

These rope operated safety switches are installed on machines or conveyor belts, to activate the emergency stop of the machine on every hand intervention on the rope, from any point. They allow cost savings on machines of medium-large size, where normally many emergency stop push buttons can be replace by one single switch. Provided with self-control function, they constantly check their correct working operation, signalling with the opening of the contacts on eventual loosening or breaking of the rope. These safety switches, after their activation, keep the contacts open till the reset push button is manually pulled, even if the rope is left free.
View Complete Details

Din Connectors

  • Standard earth position: 12 hours
  • Maximum conductor size: 1.5 mm2
DIN 43650 is the standard for a series of electrical connectors, which are commonly used with solenoid valves (especially those used on valves in hydraulics and pneumatics). Other applications include the connection special sensors, such as pressure switches, filter switches, optical, proximity and limit switches.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Norstat, Inc.)
  • Rockaway, NJ 07866 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/norstat-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0007457624{main}( ).../index.php:0
20.02052019760include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02942742304include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03553677992header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice