Our Products #5140986

Nott Companys Rubber Fabrication Division has been manufacturing custom parts from silicone elastomers since the since the 1960s. With over 50 years of experience using silicone solid rubber, silicone sponge rubber and silicone foam rubber, we can help our customers design innovative, effective, and high-performance custom silicone parts. Whether its die cutting, slitting, laminating, vulcanizing, or using our proprietary processes for applying adhesives to silicone rubber products, we can design, prototype and manufacture parts that meet your exacting requirements. Please call us to discuss your application or schedule a visit with one of our expert salespeople.

We stock an extensive amount of commercial-grade and specification-grade silicone solid, silicone sponge and silicone foam products, including the full line of CohrlasticTM silicone sponge and foam products from Saint Gobain (formerly CHR Industries). Our silicone rubber products include characteristics such as very low compression-set, thermal conductivity, UL94HB and UL94V0 ratings and fuel and fluid resistance. Some additional specifications that our silicone sponge products meet include MIL-R-46089, MIL-R-6130C, AMS3195, AMS3196 and ASTM D6576. We can also apply silicone or acrylic-based adhesives (PSAs) to any of the silicone products that we make.

Felts, sometimes called non-wovens, are manufactured in a variety of ways and used in many different applications, including applicators, polishers, wipers, wicks, seals, cushions and gaskets. Wool (natural) felt comes in many thicknesses and densities and has excellent cushioning, sealing, wicking and environmental properties. Synthetic felts are generally made from polyester, nylon, rayon, polypropylene, Nomex and Teflon.

Traditional Felts are made by manipulating wool fibers with the combined action of pressure, heat, moisture and vibration.

Traditional Needled Felts are manufactured to the same general specifications as their counterparts in the traditional pressed felt line. This approach often allows a lower-cost alternative to an application that allows a substitution. These products are usually a blend of natural and synthetic fibers.Engineered Needled Felts are made with a needling process that must be used when making felt from man-made fibers, as these do not lend themselves well to being made with the pressing process. A variety of different materials can be needled together to meet sophisticated demands. Also, a number of porosities and finishes can be achieved through different processes, including calendaring and singeing.

Fabrics, sometimes called wovens, can come in numerous different styles, thicknesses and widths, and can be used in numerous applications, including coverings, decorations, separators and sound absorbers. Fabric differences can range from the cotton fabric used to make clothing to carpet used for sound absorption or surface protection.

Nott Company provides a number of different types of EMIRFI products to companies in industries as diverse as defense, aerospace, telecommunications and electronics. Shielding products are used as a medium to provide electrical conductivity across a gasket-flange interface. We have such products, including electrically conductive elastomers with carbon, graphite or silver-filled silicone. In addition, we offer oriented wire in silicone, metallized fabric-covered foam, aluminum mesh and other specialty products. EMIRFI products can be waterjet cut, die-cut, fabricated, molded or extruded, depending on the application. Please allow us to help you create an effective solution.
EC102 An electrically conductive carbon-filled silicone that performs three distinct functions: 1) it acts as a low amperage conductor, 2) it shields RF and EM interference and 3) it protects against electrostatic discharge. It is available in thicknesses ranging from 0.020" to 0.50" and can be supplied in an uncured state. Volume resistivity = 5 ohmcm.

Nott Company stocks a wide variety of tapes with substrates, including PTFE, polyimide, UHMW, PTFE-coated fiberglass, polyester and foil. Most of these substrates are available with silicone, acrylic and rubber-based adhesives, and are generally stocked in either logs (up to 250 yards) or jumbo rolls (up to 5000 yards) that can be converted to any width and length to suit your needs.

converting equipment and our tape materials are located in a specific area to keep the adhesive in prime condition with the longest shelf life possible. Typical applications for our tapes include heat sealing, abrasion resistance, wear protection, thermal and electrical insulation, electrical and thermal conductivity, plating, fume, area-mask, and gold finger protection, hot-air leveling, coil winding and harness assembly. We can also custom-make foam tapes of any thickness and width you require.

We have worked extensively with elastomeric materials since the 1960s. We offer comprehensive fabricating and converting services to virtually any flexible material. In addition to the materials below, we can provide other specialty elastomers and can create composite materials for any application you may have. We can also apply a film or fabric or an adhesive with a peel-away liner on any of our materials to assist in the manufacturing or assembly of your product. Please contact us with your most demanding application to allow us to help you create an effective solution.

Silicone Closed or open cell available. High performance elastomer with excellent resistance to heat and cold while retaining its flexibility. Outstanding resistance to compression set and most environmental conditions including weathering, ozone, and oxidation and has high dielectric strength. Poor in steam, ketones, or chlorinated hydrocarbons. This is an excellent material for high temperature gaskets, seals, weatherstripping and applications requiring flame resistance and compression set resistance.

We can fabricate plastic sheet and film into many different custom products through waterjet cutting, die-cutting, slitting, laminating, rewind slitting, sheeting and shearing. In addition to the materials below, we can provide other specialty plastics and can create composite materials for any application you may have.

PTFE is also known as Teflon, which has unsurpassed chemical resistance, high dielectric strength, and is non-flammable and inert to weather and sunlight. PTFE has the lowest coefficient of friction of any solid. PTFE products are used as gasket and packing materials in chemical processing equipment, as electrical insulation for maximum reliability, and in bearings, seals, piston rings and other mechanical applications, especially those requiring anti-stick characteristics. PTFE and expanded PTFE are available in thicknesses from 0.001 to 0.25.

Nott Company inventories low, high and ultra-high densities of polyethylene. PE has excellent solvent resistance and UHMW-PE (ultra-high molecular weight) meets FDA requirements for direct food-contact applications. UHMW-PE will not encourage growth of bacteria or fungus, is self-lubricating, and has extremely high abrasion-resistant properties. Some applications include friction washers, rollers, gears, guides, wear bars, chute liners and foot cutting boards. PEs maximum continuous operating temperature is 180F and the thicknesses that are available range from 0.003 to 6.0.

These products are generally used as flange gaskets in a wide variety of applications. Temperatures handled by these materials range from 50F up to 900F for graphite sheet. We have several of these materials in stock and can custom make any gasket you need, from small quantities on manual presses to high volumes on fast CNC presses. Materials are available in many different thicknesses and widths. Please contact us with any questions you may have and allow us to help you create an effective solution.

Vulcanized Fiber (Fishpaper) - Chemically hardened paper with excellent dielectric strength and high friction and oil resistance. It is relatively inexpensive.

Cellulose Fiber Used in applications requiring medium flange-bolt pressure. This product has some fuel resistance, but is degraded by acids and water. It can handle temperatures of 250F.

Reinforced Cellulose Fiber This gasket material is reinforced with a rubber binder, which adds resistance to some chemicals and limits moisture absorption, which can improve the seal. Used in applications requiring medium flange-bolt pressure and a maximum temperature of 350F.

Reinforced Aramid Fiber This material contains a rubber binder that helps to limit moisture absorption. It is used in applications requiring medium to heavy flange-bolt pressure. There are a variety of rubber binders available, and this material can handle temperatures up to 750F. Thicknesses range from 164 to 116".

Reinforced Aramid FiberCompressed - This compressed material contains a rubber binder to help limit moisture absorption. It is used in applications requiring heavy flange-bolt pressure. There are a variety of rubber binders available, and this material can handle temperatures up to 750F. Thickness ranges from 164" to 316".

Nott Company can provide custom-molded and extruded items in solid and cellular form. Our experts can help you determine the polymer type that best fits with your application and environment. In addition to rubber in the polymer types below, we can provide other specialty elastomers for molded and extruded items in any application you may have.
Silicone High-performance elastomer with excellent resistance to heat and cold, while retaining its flexibility. Outstanding resistance to compression set and most environmental conditions, including weathering, ozone and oxidation, and has high dielectric strength. Poor in steam, ketones, or chlorinated hydrocarbons. Great material for high-temperature gaskets, non-stick surfaces, and almost any high-performance application you have.

Neoprene All-purpose synthetic rubber with good resistance to oil, gasoline, chemicals, sunlight, ozone and oxidation. Poor in nitric acids, aromatics and chlorinated hydrocarbons. Good for gaskets, seals and surface protection.

We have many different types of sheet rubber and matting in stock with a variety of thickness and hardness characteristics, which allow rapid turnaround of your prototyping or design request. In addition to the materials below, we can provide other specialty elastomers and can create composite materials for any application you may have. We can also apply an adhesive with a peel-away liner on any of our materials to assist in the manufacturing or assembly of your product.CorkNeoprene Blended material made from cork particles and neoprene rubber to improve sealing capabilities and physical characteristics such as fatigue and compression set.

We offer an extensive range of products with PTFE, silicone rubber and organic rubber coatings on a wide variety of fiberglass and other woven-fabric materials. We can apply acrylic and silicone-based, pressure-sensitive adhesive backings with peel-away liners to most materials.

We stock three grades of PTFE-coated fiberglass in our inventory, ranging in thickness from 0.003 to 0.010, with thicker materials available if needed. Nott Companys PTFE-coated fabrics combine the easy release and heat resistance of polytetrafluoroethylene (also known as PTFE, or Teflon) with the strength and dimensional stability of fiberglass, creating a product suited for a variety of demanding industrial applications. Dimensionally stable in a range of temperatures from -100 to +550F (-73 to 288C), PTFE-coated fabric is non-toxic, odorless, tasteless, and is FDA compliant (21 CFR 177.1550) for use in food processing, packaging and handling. The fabric is made from woven fiberglass cloth that has been coated with PTFE.