Nuvite Chemical Compounds Corporation

WATERLESS, HEAVY-DUTY DRYWASH Removes stubborn carbon, dirt, stains, oil & moderate oxidation on painted substrates. Provides UV protection & restores gloss to oxidized paint. AVAILABILITY: quart, gallon, 5 gallon, 55 gallon sizes DIRECTIONS FOR USE: Apply NUPOL “as is” with a terry cloth towel, pad or mop head. DO NOT DILUTE. Agitate aggressively & uniformly over surface, spreading material to very thin layer. Work small areas for best results. Allow to completely dry. Using a clean towel or mophead, buff for slick high shine. Follow regular routines maintenance program with NuPower II & NuGlaze.

WET WASH, DEBUGGER & CITRUS-BASED CLEANER Citrus-based cleaner exceptional for general wet washing, debugging & degreasing. Recommended for periodic cleaning of exterior surfaces in dilutions determined by the extent, condition and type of soil to be removed. AVAILABILITY: quart, gallon, 5 gallon, 55 gallon sizes DIRECTIONS FOR USE: For Wet Wash: Dilute 1:12 to 1:20 with water, depending upon soil conditions and cleaning frequency DO NOT DILUTE. Agitate aggressively & uniformly over surface, spreading material to very thin layer. Work small areas for best results. Allow to completely dry. Using a clean towel or mophead, buff for slick high shine. Follow regular routines maintenance program with NuPower II & NuGlaze.

• size1 gallon

PLASTIC CLEANER & POLISH SPRAY ON – WIPE OFF For use on windows & other transparent plastic materials. 100% Abrasive free Non-hazing Non-static Non-toxic Non-glaring Non-yellowing Non-flammable DIRECTIONS FOR USE: Shake well. Spray generous amount of product on material to be cleaned. Wipe off with clean, soft, dry cloth. Use another clean, soft, dry cloth to bring plastic to a high luster.

ANTI-CORROSION FORMULA PROTECTS | PENETRATES | LUBRICATES AVAILABILITY: 13 oz. can, 32 oz. sizes DIRECTIONS FOR USE: Spray or wipe on a uniform coat of ACF-50 directly to the area to be protected. Apply a heavier coat to areas where corrosion is present. Re-application of ACF-50 may be necessary after solvent cleaning, contact with certain chemicals (acid, etc.) or when metal surface has been severely damaged by abrasion.

HEAVY CORROSION & SURFACE REPAIR Utilized in a multi-step procedure on clad, cast or forged aluminum, nickel, stainless steel, etc. DIRECTIONS FOR USE: Apply sparingly with tufted wool compounding pad on a circular buffer (1600-2000 rpm). Polish until oxidation & residue disappear, about 60 seconds. Repeat until desired surface is achieved. Follow with NUSHINE IIC with circular buffer and tufted wool pad. Final finish with NUSHINE IIS. Not recommended for clear coated finishes.

cludes: Dual-head Cyclo Polisher 4″ velcro booties (2 pk) Flannel Polishing Cloth (10 pk) 16×16″ Microfiber detailing cloth NuShine IIS (1lb) NuImage (1pt) Weekender Bag