Welcome to O-Navi, LLC
Manufacturer / Exporter / Supplier Of Single Axis MEMS Gyro Module, Analog Tri-Axial 6 Degree-of-Freedom MEMS IMU Module, Digital Tri-Axial 6 Degree-of-Freedom MEMS IMU Module, GPS Autopilot Module
Manufacturer / Exporter / Supplier Of Single Axis MEMS Gyro Module, Analog Tri-Axial 6 Degree-of-Freedom MEMS IMU Module, Digital Tri-Axial 6 Degree-of-Freedom MEMS IMU Module, GPS Autopilot Module
The FalconGX is a Tri-axial six degree-of-freedom Digitak inertial sensor module. The FalconGX utilizes the latest MEMS sensor technology for angular rate and acceleration sensing. Sensor outputs are conditioned and low-pass filtered for improved performance. The FalconGX has RS-232 serial outputs in ASCII or binary format. The FalconGX is a complete 6DOF digital IMU solution in under 2 cubic inches of volume. An on-board 10bit digitizer makes integration in digital systems straight forward. On-board temperature sensor for compensation. Accelerometer options for ±2g & ±10g's. Angular rate gyro sensitivities of ±200 or ±400°sec. The FalconGX has six gain stages for accelerometers and rate gyros. Standard systems are factory set for unity gain. High performance 5th order elliptic filters on all IMU channels configurable from 1-100Hz. The FalconGX can be user programmed for custom applications. O-Navi has an extensive line of development tools available for our products.
The GyroPAK3 is a member of the GyroPAK series of 'packaged' sensors. These products are single axis MEMS angular rate sensor modules with analog outputs. GyroPAKs are intended for custom packaging configurations and precision alignment in customer specific structures. The GP-3 measures 20mm on a side and can easily be mounted in a cube less than one inch. An optional digitizer module is available for easier interface to digital systems. On-board temperature sensor for compensation. Gain stage for increasing angular sensitivity.
The Gyrocube 3A is a member of the Gyrocube series of six degree-of-freedom IMU modules. These products have tri-axial MEMS based angular rate and accelerometer sensors with analog outputs. The Gyrocube3 is a complete 6DOF analog IMU solution in 1 cubic inch of volume. An optional digitizer module is available for easier interface to digital systems. On-board temperature sensor for compensation. Accelerometer options for ±2g & ±10g's. Angular rate gyro sensitivities of ±200 or ±400°sec. Standard systems are factory set for unity gain.
The PhoenixAX is a six degree-of-freedom IMU & GPS navigation module specifically designed for autonomous vehicle research. The PhoenixAX has tri-axial MEMS based angular rate and accelerometer sensors with a full featured GPS receiver on a single board. The PhoenixAX also features on-board staticdynamic pressure sensors for aircraft applications and temperature sensor for compensation. Accelerometer options for ±1.5g, ±2g & ±10g's. Angular rate gyro sensitivities of ±150 or ±300°sec. The PhoenixAX has six gain stages for accelerometers and rate gyros. Standard systems are factory set for unity gain. High performance 5th order elliptic filters on all IMU channels configurable from 1-100Hz. Advanced IIR filtering and kalman filtering available. The PhoenixAX includes data pump software which digitizes and reports sensor data via a logic level serial channel. Intended for user programmed applications such as UAV stability, control and navigation, the PhoenixAX is compact and low cost. O-Navi has an extensive line of development tools available for the PhoenixAX.
Share your thoughts with other customers for O-Navi, LLC
Add Review
