Post Buy Requirement
OV
United States
Add Review

Other Products / Services

M-Steel

M-steel is a low alloyed, or non-alloyed, m-treated steel that is the ultimate choice when you need superior machinability combined with exceptional toughness and fatigue strength. It has proven its ability to achieve significant reductions in machining costs for component manufacturers which have replaced conventional steel with m-steel. M-steel enables higher cutting speeds and improved efficiency. Tests show that m-steel can reduce machining costs by 3040%, significantly boosting profitability.

The m-steel concept
our m-steel treatment can be applied to any steel grade. The basis for the concept is that non-metallic inclusions are modified and controlled with calcium treatment. These inclusions are modified in a way to maximize machinability and to improve transverse fatigue strength. In this way, a protective layer is formed on the cutting tool during machining that very significantly reduces the wear on the tool and increases tool life. At every stage of the m-steel production process the material is optimized to improve machinability, from raw material through melt, to casting, hot rolling and the final heat treatment. Individual delivery requirements can be met to supply your material in the best form for your machines in compliance with tight straightness and dimensional tolerances. M-steel has a consistent machinability from cast to cast, meaning that machines can be run with fixed high cutting rates and predictable tool change intervals from one production run to another.
View Complete Details

Further Processed Bar

  • Diameters 10 to 127 mm
  • Lengths 10 to 8, 000 mm
Available in a wide range of shapes, our bright bars grades eliminate processing steps and unnecessary stock build-up. Our bright bars offering contains the peeled bars, drawn bars, ground bars and pre-components listed under the further processed bar products.
View Complete Details

Bearing Quality Steel

Bq-steel is a bearing quality clean steel that has been optimized for fatigue strength by a strict control of steel cleanliness. Bq-steel is also ideal for new design solutions in a wide array of demanding applications outside the bearing industry that require longer performance and higher loads.
The extended performance, higher loads and high cleanliness of bq-steel are a result of the ovako clean steel program. Purity of production means that the material has significantly smaller inclusions compared to conventional steel and, as a result, the fatigue strength of the steel is increased dramatically. Use of the material allows components to be manufactured in smaller sizes.

Component downsizing and increased loading are both issues facing manufacturers today as space restrictions and lower operating weight are driven by energy conservation. Ovakos new generation of bearing quality steel, bq-steel, is optimised and well-proven in applications where fatigue strength is critical, allowing component manufacturers to rethink their design solutions. High strength through hardening and high fatigue resistance through steel cleanliness facilitate the manufacture of components to meet the requirements of today and tomorrow. This is true for a wide range of industries where high cyclical loading is an issue.
View Complete Details

WR-Steel

WR-Steel, which stands for wear resistant steel, includes a broad range of grades with a wide range of hardness levels, dimensions and steel grades designed to give you a wear-resistant advantage when making products exposed to a high degree of wear and where service life is important.
The whole idea is to combine cost efficiency at the manufacturing stage with just the right wear resistance in your end product. The WR-Steel mission is to optimize the wear resistance of your products and, at the manufacturing stage, give you the flexibility you want to be able to form, shape and weld the steel to fit your engineering needs precisely. With three main metallurgies of billets, blooms and ingots, the WR-Steel product range is the broadest of its kind in Europe and includes more than 30 different types of boron steel and special grades for mining applications
View Complete Details

Hot-rolled Flat Bar

Flat bars by Ovako combines precisely controlled manufacturing processes for superior impact toughness, good surfaces and high yield strength across a range of applications. Ovako delivers hot-rolled flat bars in a broad dimension range. The bars are characterised by excellent straightness and shape as well as good surfaces and low decarburisation.
Straightness
The out of straightness is measured and our flat bars comply with European Standard EN 10058 as-rolled, but can also be delivered in the as-straightened condition.
Shape and dimensions
The rolled shape is generally flat bars with square corner edges. It can on request also be rolled as flat bars with different corner radiuses. The tolerances on dimensions for flat bars fulfill the European standard EN 10058. Our rolling mills have excellent capability to produce even tighter tolerances. The most common bar length is 6 meters, but can also range from 2.8 to 21 meters, depending on size and the producing rolling mill. Heat treatments may restrict the maximum length. Bars can be delivered sawn to exact lengths.
Hot-rolled spring steel flat bars
Ovako delivers hot-rolled spring steel flat bar according to European Standard EN-10092-1 (Profile A, B, C). The steel used in Ovakos flat bars for spring manufacturing has very low levels of non-metallic inclusions and optimal hardenability. These contribute to a favorable yield to- tensile strength ratio in the quenched and tempered condition a combination of properties that provides exactly the right qualities for the end product.
View Complete Details

Wire

  • Size 100
Ovakos SR-100 Wire is a surface removed and inspected wire that increases the quality of the finished product. Sometimes the surface of rolled base materials is sensitive to cracking and decarburisation, which can have a negative effect on the production economy of the finished product. In the production of SR-100Wire we remove surface defects and carry out a 100%automatic inspection of the surface. Ovako offers wire that meets most requirements for high-grade structural steel and bearing steel. The steels we use for our wire are characterized by high consistency of analysis and cleanliness.
As a rule, our wire is manufactured in accordance with specifications established by our customers. Tolerances and dimensions are adapted to the demands of the finished product and its manufacturing routines.
View Complete Details

Seamless Hollow Bar

Our tube products are characterized by uniform properties, close tolerances and small machining allowances. Ovakos tubes and hollow bars are used when there are stringent demands on the material, such as within the rolling bearing, automotive, hydraulic and general engineering industries.
Hot-rolled and cold worked tubes
Our tube products can be provided in all Ovako steel grades. We also supply hot-rolled peeled tubes, as well as cold-rolled or drawn centerless ground tubes. Tubes can also be cut according to customer requirements.
View Complete Details

Hot-rolled Bar

Over the years we have gained a good reputation for products in which fatigue strength, toughness and wear resistance are critical. As well as meeting the specified requirements, our bar products offer good formability, machinability and weldability, making them a cost-saving solution for our customers. Our hot-rolled bars can be further processed by heat treatment, machining and chrome plating.
A major part of our round bars are supplied as peeled, ground or drawn bright bars. The Ovako hot-rolled bar offering also contains round bars, flat bars, round corner squared bars, special properties bars, special profiles and precomponents plus our SR-100 Wire and the Cromax product family. All are available in a variety of sizes. Our hot-rolled bars are characterised by close tolerances, excellent straightness as well as roundness, good surfaces and low decarburisation. This makes them ideally suited for forging and machining.
View Complete Details

Rolled Rings

Rolled and forged rings by Ovako reduce your need for further machining and associated maintenance costs and material waste, with longer lifespans and higher wear and corrosion resistance.
As a result of our quality control, manufacturers can simplify their production processes and reduce their costs because the rings are not only predictably consistent from batch to batch, but also easy to process further. Ovako produces profiled rings with very small allowances and tight tolerances close to the final shape of the end product. In addition, our machined rings enable you to concentrate resources on finishing andor assembly. The dimensional range is 1704000 mm and the weight range is 75000 kg. Forged rings are also supplied up to 3400 kg. Furthermore, Ovako can offer shot blasted rings of diameters up to 4000 mm and weights up to 5000 kg
View Complete Details

Seamless Tube Bar

Our tube products are characterized by uniform properties, close tolerances and small machining allowances. Ovakos tubes and hollow bars are used when there are stringent demands on the material, such as within the rolling bearing, automotive, hydraulic and general engineering industries.
Hot-rolled and cold worked tubes
Our tube products can be provided in all Ovako steel grades. We also supply hot-rolled peeled tubes, as well as cold-rolled or drawn centerless ground tubes. Tubes can also be cut according to customer requirements.
View Complete Details

Forged Rings

Rolled and forged rings by Ovako reduce your need for further machining and associated maintenance costs and material waste, with longer lifespans and higher wear and corrosion resistance.
As a result of our quality control, manufacturers can simplify their production processes and reduce their costs because the rings are not only predictably consistent from batch to batch, but also easy to process further. Ovako produces profiled rings with very small allowances and tight tolerances close to the final shape of the end product. In addition, our machined rings enable you to concentrate resources on finishing andor assembly. The dimensional range is 1704000 mm and the weight range is 75000 kg. Forged rings are also supplied up to 3400 kg. Furthermore, Ovako can offer shot blasted rings of diameters up to 4000 mm and weights up to 5000 kg
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Ovako)
  • Ft MIll, SC 29708 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/ovako/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457856{main}( ).../index.php:0
20.01552023304include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.23972745424include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.24603681104header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice