Manufacturer / Exporter / Supplier Of copperlink ruggedized ethernet extenders, copperlink ethernet extender, copperlink ruggedized multi-drop ethernet extender, copperlink managed etherned extender, ethernet extender, COPPERLINKS ETHERNET EXTENDER
Features --Image: Made in USA -- High Speed Extension—Achieve speeds up to 5.7 Mbps. Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application. CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port. Ruggedized— Operating temperature of -40 to 85°C and optional conformal coating to protect against condensing humidity and corrosion. Hardened—Aluminum enclosure designed to meet IP40 specifications; DIN rail mount included Up to two Ethernet ports—The CL1311R has one RJ-45, 10100Base-T Ethernet port. The CL1314R has two RJ-45, 10100Base-T Ethernet ports. Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging. Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link. Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust. Overview Ethernet extension doesn’t have to be expensive or difficult. The CL1300R series of Ruggedized Ethernet Extenders open the door to cost-effective Ethernet extension that is easy to set up. Featuring plug-and-play installation, the CL1300R series CopperLink Ethernet Extenders leverage existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at high speeds over long distances. Operating over standard 0.5 mm (24 AWG) voice-grade wiring, the CL1300R series delivers speeds up to 5.7 Mbps and extends Ethernet connections across distances ranging from 2.7 to 6.9 km (1.7 to 4.3 miles). Whether you need connect to a remote office or private-network backbone to a corporate LAN—or interconnect such network-enabled devices such as PCs, digital sensors and IP cameras—Patton Ethernet Extenders offer the industry’s optimum combination of speed and distance. Patton’s CopperLink Ethernet Extenders ensure hassle-free set-up and operation, while achieving the highest possible line rate for the required distance and electro-magnetic environment. Users “hard-set” the desired line rate via DIP switches or console Telnet. A 35mm DIN rail clip is included on all units for clean installations. The CL1311R comes with a single Ethernet port and the CL1314R comes with two Ethernet ports. Both units feature auto-sensing, 10100Base-TX Ethernet switch that provides automatic medium-dependent interface crossover capability (auto-MDIX). That means you can use cross-over or straight-through cables (whichever is handy) to connect up your Ethernet devices. The auto-MDIX feature detects the polarity of the cabling on each port, and automatically configures the signaling to match. Absolutely no user-configuration is required. Operating at layer 2 of the OSI model (data link layer), the CL1300R series transparently passes all higher-layer protocols—including VLAN tagging, multicast addressing, VPN pass-through for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MODBUSTCP and PROFINET IO. Set-up is easy! Simply connect up to your LAN devices to the Ethernet switch, plug the copper twisted-pair into each extender, and apply power! For simple, cost-effective and efficient Ethernet extension, Patton's CopperLink Ethernet Extenders are the ideal solution! Distance on 24 AWG (0.5 mm) Line Rate K Feet Miles km 192 22.5 4.26 6.9 256 22.5 4.26 6.9 512 22.1 4.18 6.7 768 19.5 3.69 5.5 1024 18.5 3.50 5.6 1280 18.5 3.50 5.6 1536 18.6 3.50 5.6 2048 16.5 3.13 5.03 2304 16.5 3.13 5.03 4608 11 2.08 3.35 5696 9 1.70 2.74 Applications When interconnecting sites on a corporate campus, buildings and network devices often lie beyond reach of a standard Ethernet segment. Now, you can use existing copper network infrastructure to connect remote LANs across longer distances and at higher speeds than previously thought possible. Patton’s CopperLink long range Ethernet Extender is the ideal solution for simple, cost-effective, high-speed campus LAN extension. Ethernet plug-‘n’-play operation gets your network up-and-running in seconds. Providing auto-sensing fullhalf duplex 10100Base-T Ethernet ports—plus an integrated crossover switch for hassle-free system setup—the value of this Ethernet extender is unsurpassed. Plug-and-Play—Just unpack a pair of extenders and plug in the cables. Apply power and your connection is up and running. It just doesn’t get any easier! High SpeedLong Reach—The CL1300 series Ethernet extenders provide the industry’s ultimate combination of speed and distance!
High Speed Extension—Achieve speeds up to 5.7 Mbps. Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application. CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port. Built-in 4-port Ethernet Switch—Connect up to four Ethernet devices using the integrated 4 X 10100Base-T, auto-sensing, fullhalf-duplex Ethernet switch. Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging. Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link. Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust. Overview Ethernet extension doesn’t have to be expensive or difficult. Patton’s CL1314 long range Ethernet Extenders open the door to cost-effective Ethernet extension that is easy to set up. Featuring plug-and-play installation, the CL1314 CopperLink Ethernet Extenders leverage existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at high speeds over long distances. Operating over standard 0.5 mm (24 AWG) voice-grade wiring, the CL1314 delivers speeds up to 5.7 Mbps and extends Ethernet connections across distances ranging from 2.7 to 6.9 km (1.7 to 4.3 miles). Whether you need connect to a remote office or private-network backbone to a corporate LAN—or interconnect such network-enabled devices such as PCs, digital sensors and IP cameras—Patton Ethernet Extenders offer the industry’s optimum combination of speed and distance. Patton’s CopperLink Ethernet Extenders ensure hassle-free set-up and operation, while achieving the highest possible line rate for the required distance and electro-magnetic environment. Users “hard-set” the desired line rate via DIP switches or console Telnet. The CL1314 comes with a built-in four-port, auto-sensing, 10100Base-TX Ethernet switch that provides automatic medium-dependent interface crossover capability (auto-MDIX). That means you can use cross-over or straight-through cables (whichever is handy) to connect up to four Ethernet devices. The auto-MDIX feature detects the polarity of the cabling on each port, and automatically configures the signaling to match. Absolutely no user-configuration is required. Operating at layer 2 of the OSI model (data link layer), the CL1314 transparently passes all higher-layer protocols—including VLAN tagging, multicast addressing, VPN pass-through for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MODBUSTCP and PROFINET IO. Set-up is easy! Simply connect up to four LAN devices to the Ethernet switch, plug the copper twisted-pair into each extender, and apply power! For simple, cost-effective and efficient Ethernet extension, Patton's CopperLink Ethernet Extenders are the ideal solution! Applications Typical Application When interconnecting sites on a corporate campus, buildings and network devices often lie beyond reach of a standard Ethernet segment. Now, you can use existing copper network infrastructure to connect remote LANs across longer distances and at higher speeds than previously thought possible. Patton’s CopperLink long range Ethernet Extender is the ideal solution for simple, cost-effective, high-speed campus LAN extension. Ethernet plug-‘n’-play operation gets your network up-and-running in seconds. Providing four auto-sensing fullhalf duplex 10100Base-T Ethernet ports—plus an integrated crossover switch for hassle-free system setup—the value of this Ethernet extender is unsurpassed. Plug-and-Play—Just unpack a pair of extenders and plug in the cables. Apply power and your connection is up and running. It just doesn’t get any easier! High SpeedLong Reach—The CL1314 Ethernet extender provides the industry’s ultimate combination of speed and distance!
Features --Image: Made in USA -- High Speed Extension—Achieve speeds up to 5.7 Mbps. Flexible Uses—Can be used as either an long distance Ethernet extension (repeater) andor in Multi Drop Ethernet applications Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application. CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-45 ports. Extended Temperature—-40 to 85°C operation. Ruggedized—Aluminum enclosure designed to meet IP40 specifications Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging. Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link. Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust. Overview The CL1314MDE Multi-Drop Ethernet Extender used in conjunction with the CL1314R makes Ethernet extension a breeze. The MDE series of Ethernet Extenders allows users to replace their legacy serial coms with cost-effective Ethernet (IP) that is easy and inexpensive to set up. Featuring plug-and-play installation, the CL1314 MDE leverages existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at moderate speeds over long distances. The MDE Extender not only allows multi-drop functionality but also serves a repeater function doubling your maximum distance at every hop. Operating over standard 0.5 mm (24 AWG) voice-grade wiring, the CL1314 MDE delivers speeds up to 5.7 Mbps and extends Ethernet connections across distances ranging from 2.7 to 6.9 km (1.7 to 4.3 miles) per hop. Whether you need connect to a remote offices, kiosks, guard stations, train stations, digital sensors or IP cameras—Patton Ethernet Extenders offer the industry’s optimum combination of speed and distance. Patton’s CopperLink Ethernet Extenders ensure hassle-free set-up and operation, while achieving the highest possible line rate for the required distance and electro-magnetic environment. Users “hard-set” the desired line rate via DIP switches or console Telnet. The CL1314 MDE comes with a built-in four-port, auto-sensing, 10100Base-TX Ethernet switch that provides automatic medium-dependent interface crossover capability (auto-MDIX). That means you can use cross-over or straight through cables to connect up to four Ethernet devices. The auto-MDIX feature detects the polarity of the cabling on each port, and automatically configures the signaling to match. Absolutely no user-configuration is required. Operating at layer 2 of the OSI model (data link layer), the CL1314MDE (and the CL1314R) transparently passes all higher-layer protocols—including VLAN tagging, multicast addressing, VPN pass-through for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MODBUSTCP and PROFINET IO. Set-up is easy! Plug in the twisted pair into each Copperlink port, then plug in up to four LAN devices with Cat 5 or greater cabling, and apply power! For simple, cost-effective and efficient Ethernet extension, Patton's CopperLink Ethernet Extenders are the ideal solution! Applications Typical Applications Model CL1314MDE ruggedized multi-drop Ethernet extenders are ideal for delivering drop add Ethernet links to multiple remote locations that are beyond the 328-foot (100-meter) distance limit of Ethernet. The 5.7 Mbps throughput eliminates bandwidth concerns previously experienced with other legacy copper wired transmission technologies. The CL1314MDE includes several user configurable line rates so that a user will get a consistent link, even in noisiest environments. Using existing voice-grade copper pairs or legacy serial circuits eliminates the expense and hassle of installing low capacitance or fiber cable.
Bandwidth Rich—Bond up to 4 twisted pairs to achieve the desired rate and reach. 1 Pair: 5.7 to 15.3 Mbps 2 Pair: 11.4 to 30.6 Mbps 3 Pair: 17.1 to 45.9 Mbps 4 Pair: 22.8 to 61.2 Mbps Operates Over Twisted Pair or Cat5+—Near fiber speeds without the cost of new cable or fiber installations or the hassles of wireless line of site. Connects Point to Point or to CL4324—The CL2300 can be used either back-to-back or with the Patton CopperLink Extended Reach Ethernet Switch. Auto-Rate Adaptation Supported—Automatically selects the best rate vs. reach combination available on a per-wire basis. VLAN Tagging—VLAN tagging and processing is configurable per Ethernet port. Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust. Overview Patton’s CopperLink™ Model 2300 is a cost effective Ethernet Extender capable of achieving bandwidth rates of over 60 Mbps. The CL2300 is the ideal choice for providing internet access to bandwidth hungry small to medium size offices, wireless backhaul, Metro Ethernet, even LAN to LAN extensions. The Model CL2300 is cable of bonding from 1 to 4 pairs to increase overall bandwidth. Each pair is capable of up to 5.7 Mbps to 15.3 Mbps pending your distance requirements. The ability to configure pair bonding and various line rate modes enables service providers, integrators and businesses to choose the best available rate vs. reach combination for the application. The CL2300 supports defaults to plug-n-play mode which will allow the CopperLink Extenders to pair up automatically at the best rate achievable. Should a pair be faulty the CL2300 will automatically adjust the line rate to ensure the network connection remains stable. In addition to offering all Patton’s highly regarded CopperLink plug and play features, the managed CopperLink series adds a higher level of network control for the more demanding applications. The network management port is securely protected. Stateful Firewall inspection of traffic, accomplished through the creation of Access Control Lists (ACLs), enables the filtering of traffic based on numerous criteria including source and destination IP address, port, connection state and protocol. Logical and physical ports are selectable for bridging. Features such VLANs are configurable on a per port basis. Bridged traffic can be tagged and prioritized according to user defined parameters. The CL2300 offers easy installation. The variety of configuration options include CLI via Console (RS232), Telnet, or SSH. Also included is HTTP web based management, and SNMP. Patton's managed CopperLink series offer the versatility and reliability demanded for the most critical network applications at an affordable price. Applications When interconnecting sites on a corporate campus, buildings and network devices often lie beyond reach of a standard Ethernet segment. Now, you can use existing copper network infrastructure to connect remote LANs or devices across longer distances and at higher speeds than previously thought possible. Patton’s CopperLink long range Ethernet Extender is the ideal solution for simple, cost-effective, high-speed campus LAN extension. Plug-n-play operation gets your network up-and-running in seconds. Providing four auto-sensing fullhalf duplex 10100Base-T Ethernet ports—plus an integrated crossover switch for hassle-free system setup—the value of this Ethernet extender is unsurpassed.
Ethernet Extension—Extends 10100Base-TX Ethernet over 3300 feet (1005 meters) using 2-wire, 24-AWG twisted-pair, Cat 3, Cat 5e67, or coaxial cable. Delivers PoE—PowerPlus technology powers up both the remote CopperLink extender and the PoE enabled device connected to it. No power is required at the remote location. Transparent LAN Bridging—Passes higher layer protocols, including 802.1Q VLAN tagged and untagged packets. Fully transparent to various video compression schemes such as WMV, MPEG-4 and MJPEG. Plug and Play—Modems need no configuration to operate, Ethernet ports are auto-sensing 10100, full or half-duplex. Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust. Overview With global expansion of the Internet of Things (IoT), demand for IPEthernet-connected devices is soaring. Billions of devices are already capable of connecting to the Internet. Ethernet—and power-over-Ethernet (PoE) in particular—has grown in popularity because it strikes the perfect blend of speed, cost, and ease of use. Ethernet, however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure—involving tearing into walls, ceilings, pavement, and worse. The CopperLink 1101 kit from Patton enables Ethernet connectivity over previously installed copper infrastructure. The solution breathes new life into circuits previously deployed for such traditional non-IP applications as RS232485 controls, alarms, CCTV, analog phones, intercom speakers, and others. Instantaneously install PoE-compliant devices such as wireless access points (WAPs), IP cameras, IP telephones, IP door stations, HVAC controls, and more—with no additional overhead cost. With the extended reach the CL1101 kit provides, you can install your IP terminal equipment exactly where you want it! Flexibility of device location is paramount in such applications as building security, where increased perimeter dimension and expanded spot coverage area are critical. Applications Extend Power and Ethernet to compliant or legacy PoE devices using already installed twisted-pair cable or coax
Ethernet Extension—Extend 10100Base-TX Ethernet up to 10, 000 feet (3 kilometers)—well beyond the 328-foot (100-meter) limitation—over a single twisted-pair, Cat 5e67, or even coaxial cable. Operates Over Twisted Pair—Realize fiber-optic speeds without the expense—and hassle—of installing new cables or line-of-site wireless circuits. Plug and Play—Set these units up straight out of the box. No configuration is required. Auto-sensing 10100 Ethernet ports support full or half duplex operation. Multiple Line Rates Supported—Boasting downstream line rates up to 168 Mbps, the switch-selectable rate mode options optimize rate and reach for the noise environment, wire gaugetype and length. Transparent LAN Bridging—Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged). Data-transmission mechanism is fully transparent to such IP video compression schemes as MPEG-4, H.264 and MJPEG. Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust. Overview Perfect for bandwidth-intensive applications the CL1214 delivers off-the-chart symmetrical line rates greater than 100 Mbps. Best of all—like all CopperLink™ products—the CL1214 leverages existing copper infrastructure to deliver high speed Ethernet connectivity over voice-grade twisted pair, Cat 5e67, and—new to the CopperLink™ line—coaxial cabling. Four user-selectable configuration profiles—combined with Patton’s auto-rate adaptation feature—ensure maximum achievable symmetrical or asymmetrical rates for the installed noise environment, wire gaugetype and length. Symmetrical line-rate settings are ideal for such applications as remote LAN extension, video teleconferencing, and data backhaul. Asymmetrical configurations are well-suited for applications requiring higher downstream speeds andor longer distances between Ethernet devices. Typical symmetrical scenarios include medical imaging, livestock monitoring, underwater video, internet gaming, and transporting high-resolution IP video from security cameras. Realize fiber-like speed and distance without the expense of fiber with Patton’s Ultra-High-Speed CopperLink™ Ethernet Extenders. Applications Workgroup Ethernet Extension Application A built-in 4-port Ethernet switch makes the CopperLink Model 1214 ideal for delivering multiple IP information streams over a single cable. For example, at a guardhouse or security kiosk, you could aggregate IP data from a laptop, a motion sensor, and two high resolution IP video cameras for simultaneous transmission over a single Ethernet connection. Combining data flows from up to four network-enabled devices onto a single twisted pair or coax cable, the CL1214 can deliver IP traffic up to 4, 250 ft (1295 m) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation. With achievable line rates up to 100 Mbps, the CopperLink 1214 eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1214 is engineered to re-use existing infrastructure previously employed in legacy applications including alarm circuits, E1T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7.
Share your thoughts with other customers for Patton-Inalp Networks
Add Review
