Patton Tool Co., Inc.

The Roller Chain Breaker for ANSI chain sizes 60 through 100. (¾" through 1 ¼" pitch) Take apart ANSI chain sizes 60 through 100 quickly and easily without hammers or punches. This quality hand tool is made in the USA using hardened steel parts for long lasting reliability. Place jaws of tool over roller with push-out pin centered on chain pin. Tighten down by turning top handle clockwise until chain pin loosens, driving it partially through the link plate. Follow the same procedure on other pin of the same pin link. Return to original pin and force completely through pin plate. Do the same on second pin, freeing link plate from the pins. Remove disassembled pin link from the chain. Its that simple!

The Roller Chain Breaker for ANSI chain sizes 25 through 60. (¼" through ¾" pitch) Take apart chain ANSI size 25 through 60 quickly and easily without hammers or punches. This quality hand tool is made in the USA using hardened steel parts for long lasting reliability. Place jaws of tool over roller with push-out pin centered on chain pin. Tighten down by turning top handle clockwise until chain pin loosens, driving it partially through the link plate. Follow the same procedure on other pin of the same pin link. Return to original pin and force completely through pin plate. Do the same on second pin, freeing link plate from the pins. Remove disassembled pin link from the chain. Its that simple!

The Roller Chain Breaker for ANSI chain sizes 120 through 160. (1 ½" through 2" pitch) Take apart ANSI chain sizes 120 through 160 quickly and easily without hammers or punches. This quality hand tool is made in the USA using hardened steel parts for long lasting reliability. Place jaws of tool over roller with push-out pin centered on chain pin. Tighten down by turning top handle clockwise until chain pin loosens, driving it partially through the link plate. Follow the same procedure on other pin of the same pin link. Return to original pin and force completely through pin plate. Do the same on second pin, freeing link plate from the pins. Remove disassembled pin link from the chain. Its that simple!

Introducing the fastest, easiest way to break single strand roller chain. The new hydraulic chain breaker that works on a wide range of chain size, from .375 to 1.250 pitch and heavy series. Metric size 06b to 20 b, Effortlessly break bicycle and motorcycle chain and double pitch chain 2040 to 2080. No matter what type of job, this tool makes breaking chain as easy as 1, 2, 3! Quick, Simple and safe. This remarkable device requires no tools to change over to other size chain fixtures. Simply remove the chain nest and drive block, and replace with the size needed and your ready to break any chain. A one half horsepower electric hydraulic pump delivers ample power to handle the toughest job. The machine may also be operated manually with a hand pump, allowing you to bring the tool to the job, not the job to the tool. The machine can be mounted on a bench top or freestanding with the supplied legs. This quality tool is Made in the U.S.A., using heavy constructed 5" welded channel iron, and quality workmanship to create a tool to last a lifetime.

The New Cable Operated Chain Holder that works with ANSI size 80 through 240 Roller chain Single, multiple strand, double pitch chain and also most conveyor and engineered chains with a width of 58" or wider between inside links. A must where roller chain is used. This tool was designed to hold the chain in place on the sprockets while being repaired. Simply place hooks on rollers past opposite sides of link or links to be removed or replaced, then slack in the cable is taken up with a wrench until the chain between the hooks is relieved of tension. This will allow the operator to remove the link, or links, with a roller chain breaker. Then, insert a new master or replacement link, or links. The cable is released with the lock lever pawl and the tool is removed. Its that simple!

The Roller Chain Holder for ANSI chain sizes 35 through 60. Now a one man job for fast, easy replacement of broken links. You can now hold your chain together in position and leave your hands free for working, not chain holding. This compact tool will save time and effort by allowing you to repair roller chain without removing it from your machine.