Post Buy Requirement
PS
United States
Add Review

Our Products

Ebonite Maroon

  • Type Ebonite-Pre Rounded
  • Category Pen Blanks
  • Blank Size 3/4 x 5-1/2in
This hard, vulcanized rubber material will help you create an instantly classic pen. You will appreciate the warm touch, easy turnability and how nice it polishes. Ebonite tends to get hot while turning, so we recommend using sharp tools to get the best result. Finish with plastic finishing materials. Size 34 in. round x 5.5 in. long.
View Complete Details

HSS Bowl Gouge

  • Material Type High Speed Steel
  • Overall Length 22.5"
  • Blade Material M2 High Speed Steel
  • Blade Length 9"
  • Handle Length 13.5"
Benjamin's Best High Speed Steel 58" Bowl Gouge, 22" long. Bowl gouges have a deep flute and are used primarily for turning bowls. Also used for dishes and other hollow forms mounted on the faceplate - normally with the grain running across the turning blank.
View Complete Details

Exotic Pen Blank

  • Size Various
  • Material Type Hardwood
  • Species Various
  • Category Pen Blanks
Turn till your hearts content with this hard to beat pen blank offer. At a little over a buck per blank this 56 piece blank assortment includes some of the most rare and exotic pen blanks on the market. Includes a few of the following beautifully grained woods 34" x 34" x 5-12": *Mix may vary. Subject to availability of individual blanks.
View Complete Details

Bethlehem Olivewood Pen Blanks

  • Blank Size 3/4 x 3/4 x 5
  • Material Type Hardwood
  • Species Olivewood
  • Category Pen Blanks
These blanks were hand picked to bring you the best of the best in Olivewood pen blanks. Selected for their fabulous grain and figure, these blanks are guaranteed to evoke ohhhhs and ahhhs from your buyer or gift recipient. Harvested from Olivewood trees from the ancient city of Bethlehem. The blanks include certificates of authenticity and labels for your finished projects.
View Complete Details

Nautical Twist Pen

  • Type Ballpoint Twist Pen
  • Finish Various
  • Tubes 1
  • Hole Size 3/8 in
  • Pen Length 5-1/2
Save with this Starter Set! You get 1 Nautical Twist Pen Kit in Antique Brass, 1 in Antique Pewter and 1 in Antique Copper. Plus you get the bushings and drill bit you need to make the pen. Throughout history sailing has been instrumental in the development of civilization, affording mobility for trade, transport, warfare, and fishing. Though it's greatest contribution has been to the many great explorations in the world. This pen captures the romance and adventure of old sailing ships. It has a captivating scene engraved on tip of a grand tall ship, while the end is embellished with the captain's wheel and compass. Nautical rope accents can be found throughout and encircling the detailed Anchor clip, which given it's history, is considered a symbol of well-grounded hope. Easy to make and features a Parker style refill.
View Complete Details

Live Tailstock Center

  • Compatible Spindle Sizes 2 MT
  • Category Tailstock Live Centers
This center is large and strong with precision bearings. It runs very true and is also well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. 1-1116" overall diameter. #2MT.
View Complete Details

Toolrest Adapter Sleeve

  • Material Type Steel
  • Large Flat Jaw Gripping 5/8" ID x 1" OD
  • Category Lathe Tool Rests
Now you can use our 58" shaft speciality toolrests on any lathe. This clever adapter has an I.D of 58" to accept our toolrest shafts and an O.D compatible with your lathe. Simple installation and flawless transparent functionality.
View Complete Details

Faceplate

  • Category Lathe Faceplates
Mount your bowls snugly and securely with this dedicated chrome plated 3" Faceplate Screw Chuck with 34" screw & 4 counter sink mounting holes. Just mark the center of your blank then screw on the chuck at the marked center then secure with mounting screws. The combination of screw chuck and faceplate mount provides a very safe and secure bowl turning setup. 1" x 8tpi faceplate mount. Includes mounting screws.
View Complete Details

Lathe Tenoning Tool

  • Blade Material M2 High Speed Steel
  • Overall Length 9.625"
  • Blade Length 5.375"
  • Blade Thickness 1.3060
  • Handle Material Hardwood
Benjamin's Best High Speed Steel Tenon tool. This tool is only 116" wide. It gives a clean, sharp and accurate 90 degree angle with a very thin cut. Ideal for small delicate turnings. A must for any pen maker - ideal for cutting tenons on pen center bands. Blade is 1-14"wide x 5" long. 9" overall.
View Complete Details

Steel Cutter

  • Category Barrel trimming system
Barell trimming is an essential step for making a quality pen project. Its used to square the end of your pen blanks and pen tubes prior to final pen kit assembly. The trimmer includes a cutting shaft that fits into a drill chuck or lathe chuck - the shaft will clean the glue from the tubes and act as a pilot for the 34" squaring cutter (NOT INCLUDED) . 7mm basic barrel trimmer Includes 7mm pilot shaft, 58" squaring cutter and wrench
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Penn State Industries)
  • Philadelphia, PA 19115 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/penn-state-industries/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457984{main}( ).../index.php:0
20.01702020152include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02522742832include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03053678528header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice