Penn Wire Products Corporation

Spiral Radius Belting has all the characteristics of straight line flat wire belts, with the additional advantage of being able to make right or left turns of up to 180 degrees in combination with straight line travel. Having the ability to turn enables the belt to avoid obstacles, operate in limited space, and eliminate troublesome transfers. Elongated slots allow the pickets to nest, giving the belt the ability to make right or left turns. This nesting feature also provides for easy and through cleaning of the belt. Reinforcing Link Recommendation Belt Width Required Links Under 12" None 12" to 18" Single Links Over 18" Double Links Available Materials Galvanized Steel C1045 High Carbon Steel T-304 Stainless Steel T-316 Stainless Steel

A fabric consisting of a series of either right or left hand spirals each turned into the preceding spiral to form a continuous belt. The open mesh provides for maximum drainage and air circulation.

A fabric consisting of pairs of interlaced right and left hand spirals joined by a crimped or straight rod connector in a manner so that the pairs of spirals are interspaced by the adjacent spirals. This construction provides greater strength and larger clear openings than the balanced weave design. It is excellent for drying, washing, chemical treating and high temperature applications. Most effective opening for air circulation and liquid drainage. Will operate under extremely high stresses with little contraction in width or longitudinal stretch.

• Sizes Available1/2 x 1, 1 x 1, 1/2 x 1/2 true, 1/2 x 1 modified, 3/4 x 1.

The flat wire belt is a continuous assembly of flat wire pickets connected by straight round wire inserted through positioned holes. It has a smooth carrying surface which makes it popular in the canning and food processing industries, as well as the drying, freezing, washing, and parts transfer processes. Advantages: Smooth flat surface. Positive sprocket drive. Easy replacement of damaged or worn sections. Open mesh for easy drainage, airflow, and cleaning. Economical versus woven wire belts. Mesh Sizes Available: Standard Duty: 12 x 1, 1 x 1, 12 x 12 true, 12 x 1 modified, 34 x 1. Heavy Duty: 12 x 1, 1 x 1, 12 x 1 modified. Materials available: Galvanized, High Carbon Steel, 304ss, and 316ss. Sprockets available for both standard and heavy duty belting in cast iron, stainless steel, and plastic UHMW materials. * Also available are flangeless sprockets in c-1045 hardened steel.

A fabric consisting of precision Balanced Weave belting used to carry light to medium loads. This belting is used in combination with precision machined Pin Rolls to provide an excellent positive drive belt system. Pin Rolls are available in a one piece solid roll or segments. Pin Roll Belts are widely used in the food industry. Advantages Positive drive Excellent for tight transfers Can run at high speeds

A continuous belt consisting of fine screening attached to roller chain. Used on fryers in the food processing industry. Available in several mesh openings. Advantages of PWP Filter Belts High quality stainless chain (no flaking). Strong rivets with stainless steel spacers (no shrinkage). 316 Stainless steel high quality fabric.