Philadelphia Theatrical Supply

Great results and easy to use - Input channel preset library features over 100 presets developed by experienced concert engineers specifically for live sound applications. - Wizards assist with input gain adjustment and effects selection and routing. - On board, multi-language Info system for instant access to the user manual in Chinese Mandarin, English, French, German, Russian and Spanish.* - Color, capacitive touch screen graphical user interface combined with hardware controls for fast and intuitive operation. - 20 total inputs: 16 mic, (four with XLRTRS combo connector) and two stereo line (TRS) - Dedicated talkback mic input - Stereo Main LR outputs () - Ample monitor outputs (eight total) with 6 mono auxiliary mixes () and 2 stereo auxiliary mixes. - The 2 stereo aux outputs can drive wired in-ear monitors (IEM) directly. - Mono auxiliaries may be linked for stereo use. - Multiple ways to control aux mixes - Mix on faders* - Send from channels - Aux overview of all aux mixes - Auxiliary mixes may be assigned for Main LR output for use as sub-groups.* - Superb sound quality - Class-A microphone pre-amps - 32-bit floating point processing - 24-bit AD & DA convertors - Input channels are fully-featured: - Four-band full parametric EQ - Variable high-cut and low-cut filters - Gate - Compressor (with de-esser) - Gate and compressor assignable Pre or Post EQ* - User selectable auxiliary pick-off points* - Main and auxiliary outputs feature: - 13-octave graphic EQ (four-band parametric EQ on stereo auxiliaries) - Limiter - Delay - Notch filters - Four professional quality stereo DSP effects. Choose from: - Two types of reverb - Mono delay - Stereo delay - Chorus - Pitch-change - One Pitch Correct processor – assignable to any input channel. - Eight DCA and eight mute groups. - Assign Un-assign Input to Main Mix* - Programmable User-Buttons.* - Save your own channel presets and complete mixer scenes to internal memory or USB device. - Capturing live performance to multi-track has never been easier. Record 22 tracks (all inputs plus a stereo mix) directly to USB hard-drive. Mix down on TouchMix or import into your favorite DAW. -Remote Control - Complete mixer remote control via free iOS® app for iPad, iPhone, iPod Touch. - Monitor control via iPhoneiPod Touch App.* - Multiple Wi-Fi connectivity options.* - Individual devices may be given permissions to access one or more functions.* - Support for MIDI-over-USB footswitches.* - Security Lockout Modes -USB Wi-Fi interface and carrying case are included.

Rosco's Wallhugger is an excellent solution for applications where lighting fixtures equipped with 2P&G (stage pin) connectors need to be powered from a 15-amp wall receptacle. Includes and indicator light which illuminates when power is available.

K10 features include: - 10” Woofer; 1.75” diaphragm compression driver - 90° Nominal coverage angle - Maximum SPL 129 dB peak - 1000-watt continuous Class D power modules in all models - Onboard mixer with two combo and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output - Extensive DSP enhances system performance - DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones. Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field. - DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. - GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping. - Attractive and professional appearance - Rugged ABS enclosures - Functions as a monitor wedge - 16-gauge powder coated steel grille - Comfortable ergonomic handles - 35 mm pole sockets with Tilt-Direct™ - M10 rigging points - Eyebolt and yoke mount accessories available

KSub features include: - Dual 12” subwoofer drivers - Maximum SPL 130 dB peak - Lightweight portable powered speaker with legendary QSC amplifier power and reliability - 1000-watt continuous Class D power modules in all models - Extensive DSP enhances system performance - Attractive and professional appearance - Comfortable ergonomic handles - Rugged birch plywood enclosure - Comfortable ergonomic handles - Threaded pole socket - Speaker mounting pole included (35 mm diameter, 26.4 in 67 cm long, M20 thread)

Neutrik Solid Body DMX Adapter- Convert your DMX Data from 3 to 5 and back again so all your Lighting Equipment can communicate. (Note: it is recommended by many industry professionals that you should only convert your DMX from 3->5 or 5 -> 3 once per Lighting Rig to help avoid potential data chain signal loss problems.)

For use with systems that use standard power connections (typical home or office type connections).