Other Products / Services #5207576

Check ValvesSwagelok offers a broad line of adjustable and fixed cracking pressure check valves to control back flow in general-service and high-purity applications. Check valves: Are designed to allow fluids to flow in one direction onlyAre rated for use in medium- and high-pressure applicationsSpring and Poppet Check Valves (C, CA, CH, CP, and CPA Series)Spring-and-poppet check valves are available with nominal cracking pressures ranging from 13 to 600 psi (0.03 to 41.4 bar) in 316 stainless steel and brass and with end connections 18 to 1 in. and 6 to 25 mm in size.

ManifoldsChoose from a variety of manifold valves and related products for instrumentation applications. Our manifolds Are designed for static pressure, liquid level, and differential pressure applicationsAre available in traditional or compact inline body designs, for use in instrument, direct-mount, remote-mount, and module systemsUse a compact assembly design, resulting in reduced size and weightHave fewer potential leak pointsHave body material options such as stainless steel, carbon steel, and duplex stainless steel, and packing materials such as PTFE, for system versatility, and Grafoil, for extended temperature ratingsAre easy to install and maintainInstrument ManifoldsV, VB, and VL SeriesV, VB, and VL series manifolds feature a horizontal body design in a variety of 2-, 3-, and 5-valve instrument manifolds. The 2-valve manifolds are designed for static pressure and liquid level applications; the 3- and 5-valve manifolds are designed for differential pressure applications.

Metering ValvesSwagelok offers several metering valves for low- and high-pressure service in 316 stainless steel and brass materials with flow coefficients from 0.004 to 0.16 for low-, medium-, and high-flow applications. Metering valves: Deliver accurate flow rate control in analytical, instrumentation, and research applicationsAre suitable for low- and high-pressure situationsProvide fine adjustments for precision applications

Process Interface ValvesEfficient transitions from process piping systems to instrumentation systems in a single configuration with fewer potential leak pointsLower installed weights and smaller footprints compared to assemblies featuring multiple valves and fittingsOur selection includes: One-piece Forged Body Valves VB04 SeriesThree-piece Bolted Body Valves VB03 SeriesProcess Monoflanges MN0 SeriesReduced Fugitive Emissions Valves VB05 SeriesAll-Needle Valves VN01 SeriesHigh-Pressure, High-Temperature (HPHT) VN03 SeriesSpecifications

Proportional Relief ValvesProvide simple, reliable, over-pressure protection for a variety of general-industry applicationsHave easy external set pressure adjustment

Stream-Select ValvesReduce tubing connections and speed up installation in process analyzer sampling systemsUtilize a compact, space-saving designManage multiple process streamsPrevent cross-contaminationProvide repetitive shutoff with fewer potential leak pointsThe stream selector system (SSV series) is a modular assembly designed for process analyzer sampling systems that provides double-block-and-bleed (DBB) operation in a single compact module.

Nylon Core Hose, Fiber Braid ReinforcedHigh-performance, multipurpose hose connects quickly and safely for hydraulic, natural gas, and other general industrial applications. Smooth inner wall provides flow control and enhanced drainability for precision and cleanliness. Available with a variety of end connections; 14 to 12 in. hose available with ECE R110 alternative fuel certification. 7R and 8R SeriesNylon Core7R and 8R series hoses are designed for use in hydraulic applications where outgassing is a concern. Select 8R series hose assemblies are approved to ECE R110.

PTFE Core Hose ConvolutedProvides reliable operation for applications requiring flexibility and chemical compatibility. Optional static-dissipative, carbon-black filled core (N series). Custom hose lengths and end connections are available.

PTFE Core Hose Smooth BoreProvides chemical compatibility, drainability, and precise flow control. Optional static-dissipative, carbon-black filled core, FDA-compliant and ECE R110 alternative fuel certified hoses for specialty applications. Custom hose lengths, hose covers, and end connections are available. T Series304 SS Braid ReinforcementT series hose is commonly used where chemical compatibility and permeation resistance are desired. Select static-dissipative hose assemblies are approved to ECE R110. Standard and custom assemblies are available.

Rubber Core Hose Rayon Fiber ReinforcedRubber Core Hose Rayon Fiber Reinforced Multi-Purpose push-on hose. Smooth-bore Buna N core. Internal fiber reinforcement enhances hose pressure rating and ensures connection retention. Buna N cover resists abrasion. Bulk hose and end connections available for field assembly; custom assemblies also available. Standard hose color is blue; other hose colors include black, green, gray, red, and yellow.

Vacuum Flexible Tubing Convoluted 321 SSConvoluted flexible metal tubing and hose can compensate for misalignment and system reroutes between static connections in vacuum or low-pressure static applications. Swagelok CT convoluted vacuum flexible tubing can be compressed by at least 15 % and extended up to 50 % of manufactured length. Standard and custom tubing lengths, custom tubing assemblies, and adapters for field assembly are available.

Medium- and High-Pressure Needle Shutoff and Regulating ValvesNeedle Valves (IPT Series)The IPT series needle valves are available in a variety of 2-way and 3-way configurations, straight and angle patterns. The 316 stainless steel body with medium- or high-pressure end connections enables working pressures up to 60 000 psig (4134 bar). Manual and pneumatically actuated style valves are available. These valves are available for sour gas applications with materials selected in accordance with NACE MR0175ISO15156. See the features of the design.

Back-Pressure Dome-Loaded RegulatorsControl inlet or upstream pressure to protect sensitive equipment from costly damageEnable dynamic pressure control to provide more consistent upstream pressure as flow demands varyMaintain control safely with the fixed gas dome by balancing the dome pressure against the force of the inlet pressure

Pressure-Reducing Spring-Loaded RegulatorsReduce downstream pressure and keep it constant, even when inlet pressure or flows fluctuateControl inlet pressures up to 10 150 psig (700 bar)Minimize droop in conditions with flow and pressure fluctuationAre suitable for gas or liquid and high-purity or high-flow applicationsAre offered in bottom-mounting, self-venting, tamper-free designs, as well as panel-mounting, convoluted and non-perforated diaphragm, metal or polymer seats, and two-stage configurationsAvailable models include:Compact, General-Purpose, Spring-Loaded, Pressure-Reducing Regulators (RS[H]2 Series)OptionsNon-ventingNo filterNACE MR0175ISO 15156 (non-venting models only)Special cleaning to ASTM G93 Level CPanel mounting kit - no disassembly required

Back-Pressure Spring-Loaded RegulatorsMaintain upstream pressure control in analytical or process systemsProtect sensitive equipment from costly damageHave low internal volumeAre offered in various styles to adapt to any setting or requirement including:

Pressure-Reducing Dome-Loaded RegulatorsMinimize droop by balancing outlet pressure with dome pressureEnable dynamic pressure control to provide more consistent downstream pressure as flow demand varyMaintain control safely by balancing the dome pressure against the force of the outlet pressureAvailable models include:Air-Loaded, Ratio Pressure-Reducing Regulators (RA Series)OptionsChoice of dome-to outlet pressure ratios: 1 to 15, 1 to 40, or 1 to 70NACE MR0175ISA 15156-compliant modelsSpecial cleaning to ASTM G93 Level CGauge connections - choice of 4 configurationsDifferential Pressure, Dome-Loaded Pressure Reducing Regulators (RD[H]6DP Series)SpecificationsDome-to outlet pressure ratio - 1:1 OptionsNACE MR0175ISA 15156-compliant modelsSpecial cleaning to ASTM G93 Level CGauge connections - choice of 4 configurationsCompact, Dome Loaded Pressure-Reducing Regulators (RD2 Series)OptionsNACE MR0175ISA 15156-compliant models special cleaning to ASTM G93 Level CNo filterPanel mounting kit (no disassembly required)

Full-Flow Quick-ConnectsOffer unrestricted flow for transfer, drain, and vent systemsCan have the O-ring replaced easily without disassembling the bodyHave a variety of stem and body protector optionsAre rated for a wide range of pressures and temperatures

Instrumentation Quick-ConnectsEnable quick, easy connection with push-to-connect coupling designed for instrumentationAre offered with a single-end or a double-end shutoff design to minimize dripsAre suitable for sampling systems and test or calibration equipment when you require frequent connections, minimal air inclusion, and minimal spillageRequire just one O-ring seal in the stem insert, yet improves O-ring containmentRetain the stem with a locking dog mechanism with a large contact area

Miniature Quick-ConnectsEnable fast, easy connections in small sizesSuited to laboratory useOffer fingertip operation with a lightweight, compact designReduce spillage and air inclusion with low dead volume

PTFE-Sealed Quick-ConnectsAre suitable for hazardous chemical applications, these quick-connects minimize spillage and air inclusion in harsh or corrosive environmentsAre chemically compatible with many substancesHave recessed seals for protectionUse a flush valve design

Spare Parts and Accessories - Quick ConnectsKeyed and color-coded parts help to avoid cross-contamination or harsh reaction from the inappropriate mixing of chemicalsBody and stem protectors are also availableView and purchase our most widely used products. Discover more about how Swagelok products can work for you. Browse our catalogs or locate a sales and service center.

Tube Fittings and Tube AdaptersTube Fittings and AdaptersSwagelok tube fittings deliver a leak-tight, gas-tight seal in an easy-to- install, disassemble and reassemble form. The robust tube grip with patented, two-ferrule technology is resistant to vibration fatigue and withstands high pressures and temperature extremes. Learn about our Tube Fitting Installation Essentials Training here. Two-Ferrule, Mechanical Grip DesignThe two ferrules separate sealing and tube gripping functions; each ferrule is optimized for its function. The front ferrule creates a seal against the fitting body and on the tubing outside diameter. As the nut is turned, the back ferrule axially advances the front ferrule and radially applies an effective tube grip This design is standard on all 14 to 12 in. and 6 to 12 mm Swagelok stainless steel tube fittings to help installers make more consistent, leak-tight tube connections. In these sizes, a patented case hardening process and patented recessed and contoured geometry provide unique engineering to the Swagelok back ferrule. The hinging-colleting back ferrule design expands on the already robust performance of the traditional ferrule design.

Ball Valves Our ball valves are available in a variety of standard materials and end connections. In addition, Swagelok offers ball valves manufactured or configured to the special needs of your applications. Ball valves: Can be used in a wide range of applications, from general purpose to critical-service applications Keep system media where it belongs, control fugitive emissions and leakage Are offered in high flow and quick-quarter turn manual or pneumatic actuation Have been engineered for repeatable, leak-tight shutoff Have low overall cost of ownership Can be manufactured or configured to a wide range of specifications One-Piece Instrumentation Ball Valve (40G and 40 Series) The 40 series one-piece instrumentation ball valve has performed reliably for nearly 40 years in multiple industries. Swagelok modified the valve construction and developed an innovative assembly process. The result is the 40G series ball valve, which features an expanded operating temperature rating, improved thermal cycling capabilities, and reduced potential for leaks. Using a patent-pending seal design, the 40G series ball valve resists packing deformation, or cold-flow, for increased thermal performance and improved leak resistance.

Convoluted 316L SS Core Hose Stainless BraidConvoluted 316L Stainless Steel Braided Hose is constructed of stainless steel for minimal permeation or absorption. The convoluted core allows for flexibility, and limits kinking. Available with a wide variety of end connections. Suitable for high-temperature, vacuum, medium-pressure, corrosive or general-purpose environments.

ePTFE Membrane membrane pic2 ePTFE membrane offers superior performance compared to most other plastics with regard to chemical & bio inertness, temperature range, UV resistance, electrical and heat insulation properties. Applications can range from filtration to medical to apparel. Phillips can produce very thin membrane (110th mil) or laminated sheets of membrane to over 0.500. Fibril IND of less than 0.3 micron to 50 micron can also be produced. Because ePTFE membrane applications usually require a high degree of customization regarding physical properties, it is usually advisable to have some consultation with Phillips technical team to establish physical parameters workable for your specific situation. More advanced or challenging applications may require some development work. More detailed information can be found on the Development page.

ePTFE LaminationsWe offer Laminations of ePTFE to a variety of non-wovens and film including: Polyurethane (TPU), Polypropylene (PP), Polyester (PET), and FEP. The laminations can be used for filtration or to facilitate the bonding of the ePTFE laminate to itself or other materials.

Medium- and High-Pressure TubingCone and Thread Tubing IPT SeriesSwagelok offers cold-drawn 316 stainless steel, nominal OD, medium-pressure tubing with working pressures up to 20 000 psig (1378 bar) for use with medium-pressure fittings, as well as high-pressure tubing rated up to 60 000 psig (4134 bar) for use with high-pressure fittings.

ePTFE Gasketing & PackingOur ePTFE sealant products for industrial, chemical, and lab applications are available at unmatched prices and are a high quality alternatives to name-brand equivalents. Because of our unique manufacturing system, we are able to produce large production runs that result in lowered costswhich are passed on to the customer. Unlike other lower-cost ePTFE sealants (many of which are produced overseas), our products do not skimp on size or quality. We lower our costs by refining the production process, and not by reducing the amount of raw materials. Our products are practical equivalents to high-priced US-produced name brands, in terms of technical specifications and quality. We are happy to provide free samples of our products for comparison. We currently maintain stocks of ePTFE Joint Sealant and PTFE Valve Stem Packing at quantities sufficient to the point that we can ship 95% of our orders on the same day.

ePTFE-PTFE Composite Material Tough and stiff yet flexible ePTFE-PTFE composite can be laser machined or razor carved to form inert medical components.fep-eptfe compositeplus