Open Cell Polyurethane: Polyether, Polyester with densities from 1 pcf to 6 pcf with custom thickness from .040″ to bun thickness. Low permeability foam Poron®: High-density urethane foam with a low compression set with densities from 15 pcf to 30 pcf in very soft, firm, and very firm grades. Thickness ranges from .031 to .50 depending on the formulation. Silicone sponge and solid sheets with densities from 12 pcf to 30 pcf with thickness range of .031 to .50 depending on the formulation. Closed Cell Sponge: EPDM, Neoprene, SBR, NBR, EVA, PVC, PVCNBR with densities from 2.5 pcf to 22 pcf with custom thickness available. Cross-Linked Polyethylene: Densities from 2.0 to 12pcf. Silicone Sponge Sheet: Sponge available in soft, medium and firm grades. Solid sheet available in 30 -80 durometer. Plastic FilmsSheet: Polyester, Noryl®, Lexan®, Nylon, Polystyrene, Mylar®, ABS, Kapton®, Teflon®. Metal Films: Copper, Aluminum, Metalized Polyester, Brass Insulating & Gasketing: Fishpaper, Cork, Nomex, ITW Formex®, Armstrong Fibers®. Pressure Sensitive Adhesives: Unsupported (free film), Double coated (carrier), Transfer tapes, Laminating Adhesives, in Acrylic or Rubber. Ultra clean, Gas resistant, VHB, LSE, HSE, High Temperature, Conductive Available on most products. Sheet Rubber: Available in 30 -90 durometers and thickness range of .031″ to 1″. Polyurethane Filter Foam: Reticulated 10 pores per inch (ppi) to 100 pores per inch. Acoustical Composites: Acoustical Barrier Composites Vinyl: Perforated and solid in various colors with non-stock colors requiring minimums. Non-Woven plush fabric, Urethane films, Metalized films, and Polyester films. 3M: Bump-on®, Foil tapes, VHB, Electrical Tapes, Scotchmates®, Foam Tapes, Viscoelastic Dampening Polymers, Safety Walk®, Thermo-Bond Films, Thermally Conductive Materials, etc.