Our Products
Automobile Repair Tools & Equipment
2 Products availableAutomobile Garage Equipment
1 Products availableCleaning Machine
1 Products availableTesting Equipment
1 Products availableSpying & Intelligence Devices
1 Products availableCar Interior Accessories
1 Products availableWelding Machine Parts
1 Products availableLeading Manufacturer, Supplier & Retailer of Tire Pressure Mnonitoring System.
portable 3dwheel aligner might be the smallest wheel alignment system in the world. Without the long beamand heavycabinet that most traditional wheel aligners equipped with, thewhole set of plt-515 portable 3d wheel aligneroccupies no morethan 1 cubic meter space. The light weight and small size allow the equipment to be movedveryeasilyto any place, so the outdoor work and diy repair both become possible with plt-515. The wireless wifi can connect the small cabinet to any lcd monitor with android system, even directly connect to your smart phone.
Additional Information:
Payment Terms : T/T
Packaging Details : wooden case
Delivery Time : 30 days
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : carton
Delivery Time : 15 days
electirc body repair systembody correction system
features:
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : metal case
Delivery Time : 15 days
the engine carbon clean system works by using dry ice to create blast force which pass through the air intake of an engine and out through the exhaust system as a gas, helping to remove the excess carbon that leads to poor running issues.
it's a simple and safe process and requires no dismantling of engine parts or the use of harmful chemical products. We recommended using the engine carbon clean service as part of your vehicle's regular maintenance schedule.
this safe and reliable machine is the best one for cleaning car engine.
key features
1. Microcomputer control system that enables automatic operation;
2. Intellectual control to detect the engine stop
easy and safe operation
1. Controlled by microcomputer and automatic operation that is reliable, stable and safe;
2. Without any catalyst, only dry ice is needed to generate gas;
3. Unnecessary to dismantle the engine, directly connect to the intake manifold of the engine;
4. Unnecessary to replace the grease or grease seal, and zero cost of replacing consumables or dismantling parts.
timesavingeconomyeffectivegreen and environmental protection
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : wooden case
Delivery Time : 15 days
works with conductance measurement and intelligent charging technology
smart battery charger & tester is capable of testing, charging, maintaining, and even repairing all types of 12v lead-acid batteries including ordinary lead acid battery, agm, gel, efb. It integrates the functions of battery testing and charging. It adopts currently the world's most advanced conductance measurement technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery itself. And it has a built-in intelligent microprocessor which makes charging faster, easier, and safer to use.
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : carton
Delivery Time : 15 days
This tester is truck engine ECU wire connector, which will show all the wires of the ECU in the tester, so the technical engineer can check every wire easily.
Features:
It is great help to improve working efficiency, make the circuit maintenance much easier because you will no need to destroy car wires.
Fast and accurate:
All wires of truck ECU will be show in the tester, so you can check each wires voltage, resistance and current ect quickly and easily
Disconnect diagnostic function:
Disconnect the corresponding test plug to make disconnecttest, which can diagnosis engine cylinder break and sensor disconnect test easily, so it will avoid the trouble of recover original vehicle wires after break test.
Quick communication for diagnostic scanner:
This product comes with standard OBD-II diagnostic interface. For vehicles that could not find a diagnostic interface, or special diagnostic interface vehicle. Can easily identify and connect to scanner quickly.
Voltage test function:
Comes with 3 volt meters, can test the voltage value of the3 groups of wries at the same time.
Jump cable test function:
This product is equipped with kinds of sensors replacement wire harness. You can make quick diagnosis of sensor wires with replacement of your car wires.
Emergency rescue function :
This product has power input and output functions, It can provide power for all wire pin.
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : carton
Delivery Time : 15 days
tire pressure monitoring system (tpms) is a safety system used to measure data such as internal tire pressure and temperature. Wireless transmission technology is adopted to transmit the data directly to the dashboard in the car, and the state of vehicle's tires is clearly displayed in digital form. When tire pressure is abnormal, the system will use an indicator light, alarm or voice to remind the driver to check or replace the tire, thereby helping reduce automobile accidents.
at60is our self-developed tpms tool which can read data from most original and third-party sensors. It can also upgrade the pro-sensor wirelessly, and the upgraded sensor can replace the original sensor. The product is simple in operation and friendly in interface, and includes the tpms re-learning operation guide. It is widely used in garages and tire shops.
features:
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : carton
Delivery Time : 15 days
features:
1. Small size, light weight, easy to transport, storeand install. With expansion screws, itcan be installed on the wall, mounted on the side of the tire changer, on the column of the lift, or on other brackets. It takes up little space and can be used on mobile repair vehicles.
2. Dot-matrix liquid crystal display.
3. Electric brake.
4. Equipped with balance block split function and opt function.
5.optional 12-point laser line
instructions to facilitate the clamping of the inner weight and the sticking of the weight.
installation method:
1. Expansion screw, installed on the wall
2. M10 bolts, mounted to the side of the lift
3. Installed on the side of the tire changer
4. Install on the simple bracket
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : wooden case
Delivery Time : 15 days
This instrument uses ultrasonic sensoring technology and features small size and light weight. It is reliable and easy to use and is a practical and portable tool.
By using this instrument, you can quickly and accurately locate leaks in any pressure and vacuum system. It is very suitable for detecting cracks of pipes, valves, and etc, and is very suitable for tightness check for cabin, plane, vehicle cabinet, refrigerator, freezing plant, oil tank and other sealed compartments; in addition, it can be used to detect eletrical discharge from switches, transformers, insulators, circuit breakers, relay, bus bars and etc to prevent accidents.
Additional Information:
Payment Terms : T/T, Western Union
Packaging Details : carton
Delivery Time : 15 days