Post Buy Requirement
PO
United States
Add Review

Our Products

Single Level Pollalert

  • Voltage Rating 12-24 VDC
  • Temperature Rating -40 - 85 °C
Single level.107dB(A) 4 @ 4'
Voltage spike protected
Current draw less than 0.7 amps
Solid state electronics
Certified conformance to S.A.E. J994, type B
State, Federal, O.S.H.A., Bureau of Mines and U.S. Army Corps of Engineers' requirements
Size -4"W x 2.0"D x 2.5"H
Mounting -two .300"dia.holes on 3.25"centers.
Net Weight - 4.5 oz
Made of High impact non corroding plastic
Steam cleanable
Can be used on positive and negative ground vehicles
Compact size allows for horizontal or vertical mounting in protected areas.
Operates in temperature ranges (-40 F to 170 F)
View Complete Details

Single Level

A Medium to Heavy Duty unit for off-highway trucks, dump trucks, loaders, cranes, backhoes, etc.
Voltage spike protected
Current draw less than 0.7 amps
Solid state electronics
Certified conformance to S.A.E. J994, type B
State, Federal, O.S.H.A., Bureau of Mines and U.S. Army Corps of Engineers' requirements
Size - 5"W x 4.7"D x 3.1"H
Mounting - 2" x 4.25" centers
Net Weight - 1.9 lbs .
Made of High impact non corroding plastic
Completely weather resistant and steam cleanable
Can be used on positive and negative ground vehicles
Meets extreme requirements of off-highway equipment
Operates in temperature ranges (-40 F to 170 F)
View Complete Details

Way Plugs

Meets and exceeds all standards of SAE J560.
Floating pins for ease of alignment and maximum contact.
Will accept the widest range of wire gauges, from #16 wires to #8 ground wire.
Interchangeable with all competitive ATA types.
Tapered design fits comfortably and conveniently for easy hand-position pull. Jumbo finger pull grips and two hang-up holes.
High-impact cycolac interior with extended lip for easy removal and replacement.
Solid brass terminal screws.
40 amps continuous duty @ 6-28 VDC.
WeatherBeater seal accomodates .450 minimum wire dia.
View Complete Details

Sockets

Meets and exceeds all standards of SAEJ560 (Solid Pin Sockets only)
Floating pins for ease of alignment and Maximum Contact
Self grounded. (Die Cast only)
Optimum slant mount and drain slot rid housing interior of accumulated moisture.
Will accept the widest range of gauges from #16 wires to #8 ground wire. Ground Terminal Pin #1 will accept #14 gauge min. to #8 gauge max. Other terminals will accept #16 gauge min to #10 gauge max.
40 amps continuous duty @ 6-28 VDC.
Self grounded (Die Cast only) to #1 Ground Terminal
Stainless steel spring
Recommended Moutning Hole = 2" Dia.
Interchangeable with all competitive makes.
View Complete Details

Replaceable Circuit Breakers

Base plate and back plate made from rugged glass filled nylon to resist breaking. Bottom lip has been extended to allow for better plug and cable support. Drain hole has been incorporated into the housing to allow accumulated moisture to escape. Will accept hte widest range of wire gauges from #14 wire to #8 ground wire. Will accept all plugs conforming to S.A.E. J560 specifications. Ground may be tied to any screw mounting the rear terminal plate. Designed to provide easy serviceability of circuit breakers. Recommended that positive feed be attached to aux post on circuit breaker.
View Complete Details

Connectors

Three socket versions to choose from: Exposed, Rubber boot coverage, or Die-cast shell coverage.
High impact interiors of super strength keyed for proper assembly.
Brass terminal pins for best conductivity, terminals accept up to #12 gauge wires.
Plug available with or without cable guard.
Replaceable plug interior helps keep down maintenance costs.
Plated steel cable guard prevents cable chafing.
Two 14" mounting holes on 6-way sockets, 2-78" on center. Mounts through 1-38" hole.
View Complete Details

Single Pole Connectors

This rugged Single-pole Connector has a continuous duty capacity of 300 amps, and is ideal for almost all heavy-duty power applications- on trucks, agricultural equipment, utility vehicles, winches, light air craft ground equipment, etc. The connector is interchangeable with competitive brands.
Provides power for auxiliary equipment from battery.
View Complete Details

Electronic Logging Device

ELDs are intended to significantly reduce paperwork for operators, support driver privacy, prevent harassment, enable compliance certification and resist tampering. They make tracking hours of service easier and more accurate while ultimately improving road safety. EZ-ELD is a FMCSA compliant device.

Why Buy Pollak? Please see below.
Service compliance for Fleets and Drivers

Features & Benefits:

Quick and simple installation

Plug and play installation to "Scan and Drive" truck Bluetooth pairing. A super simple user interface for drivers via a free mobile app (iPhones and Android). Pairing the device with the driver app is done via our Scan and Drive, QR code technology .
Safe and secure

Tamper resistant for enhanced reliability. Highest level of security for your data.
Interchangeable

Works with a 9-pin, 6-pin or OBDII connection.
Tough

Robust & resilient design
Great value

One time low-priced hardware cost and a low-charge service contract.
Customer Service available

Requires almost no training.
Versatile

Works in all trucks within the range of legislation (trucks manufactured since 2000). Our EZ-ELD can be transferred between any driver or vehicle in your fleet with a 9-pin, 6-pin or OBDII OBD port. Whether your vehicles are leased, owned or rented for the day, we help you be compliant.
Pollak Stoneridge Experience

From a company producing Automotive & Heavy Duty products for over a 100 years.
Stoneridge is a leading global provider of fleet compliance hardware and software solutions to support both the competitive and regulatory requirements of fleet customers. With over four decades of experience in tachograph design and manufacturing, the Companys Electronics division is a market leader in digital tachographs in Europe, and the Companys PST Electronics division is a leader in the Brazilian market for fleet tracking and management products.
In North America, Stoneridge enters the ELD market with a full system offering that is simple for operators to install, easy for drivers to use and an excellent value proposition. It allows operators to stay compliant while saving time and money, reducing paperwork and gaining more accurate HOS records so that more time can be focused on effectively and efficiently dispatching goods.

Contact Pollak to find a distributor near you. 781-830-0340
View Complete Details

Larger Image Single Level Back Up Alarm

  • Voltage Rating 12-24 VDC
  • Temperature Rating -40 - 85 °C
The rugged and compact unit allows replacement of unnecessarily large and bulky alarms currently used on light and medium duty trucks, dump trucks, motor homes, campers, electric fork lifts and other similar applications.
Multi-voltage-- 12-24 volts, polarity protected
Voltage spike protected
Current draw less than 0.1 amps
Solid state electronics
Certified conformance to S.A.E. J994, type C
Meets State, Federal and U.S. Army Corps of Engineers' requirements
Size 4"W x 2.0"D x 2.5"H
Mounting - two .300" dia. holes on 3.25" centers
Net Weight - 4.5 oz
Made of high impact non corroding plastic with wire leads
Can be used on positive and negative ground vehicles
Compact size allows for horizontal or vertical .
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Pollak)
  • Canton, MA 02021 map, United States
  • Share us via