Post Buy Requirement
PO
Minden, Nevada, United States
Add Review

Our Products

  1. Electronic Filter 6 Products available
  2. Clamps 3 Products available
  3. Others 69 Products available

Other Products / Services

Kit Flange

  • Mount Type Adapter
  • Ground Type alluminum
Kit Flange to Bulkhead DIN Adapter
Flange bracket to mount PolyPhaser SX filter lighting protectors
View Complete Details

Vdc Industrial Protector

  • Dimensions (cm) 5.4 x 5.4 x 2.2
  • Connector Wire-in
24 Vdc Industrial Protector- Transtector CP2297
Siemens Fire Safety Model CP 2297

Mount Type
Panel
Other Features
3 six-inch leads
Receptacle
AMP Power Lock
Line Voltage
24 Vdc
Connector
Wire-in
ProtocolApplication
POTS
Dimensions (cm)
5.4 x 5.4 x 2.2
Dimensions (inches)
2.1 x 2.1 x 0.9
View Complete Details

DC Block High Power AM/FM Surge Protector

  • RF Power 1000W RMS average
  • Dimensions (inches) 1.64 x 3.01 x 1.74
DC Block High Power AMFM Surge Protector
DC block filter design provides for the ultimate in equipment protection offering high power RF protection for AMFM applications from 0.5-1000MHz

Features

Meets Bellcore #TA-NWT-000487 Procedure 4.11 wind driven 120 MPH Weatherized
View Complete Details

Vdc Pass High Power RF Protector

  • Line Voltage +48 Vdc
  • RF Power 500 W rms average, 1000 W peak
Hybrid +48 Vdc Pass High Power RF Protector
Hybrid, multistage, multi-strike, fast response, high current capacity, +48 Vdc pass, coaxial lightning protector configured with DIN female equipment side and DIN male surge side connectors for high power RF operating between 800 MHz and 2.5 GHz
View Complete Details

3 Port Bulding Entrance Panel

  • Ports 3
3 Port Bulding Entrance Panel
All inclusive modular 3 port copper coaxial entry panels that provide a single point grounding structure for grounding multiple grounds. This product will accommodate cable sizes up to 3 18" in diameter and can be ganged side by side.
View Complete Details

Satellite System Protector

  • Weight (Kg) 0.2
  • Dimensions (inches) 3.3 x 2.2 x 1.5
  • Dimensions (cm) 8.4 x 5.5 x 3.7
Satellite System Protector
MDS +24-F-F offers, 24 Vdc, 75 ohm coaxial surge protection configured with F female connectors for 300 MHz to 2.5 GHz signals.
View Complete Details

Outdoor Cat5e Bulkhead Mount Protector

  • Weight (Kg) 0.1 kg
  • Dimensions (cm) 3.6 x 3.6 x 10.0
Outdoor Cat5e Bulkhead Mount Protector - Transtector (Thunderbolt) TB 10100PoE
The TB 10100PoE (Thunderbolt) offers outdoor, Cat5e, RJ-45, bulkhead mount, IP 67, surge protector for signal throughput for 10100 Mbs PoE applications
View Complete Details

25 Foot Long Wide Copper Strap

  • Mount Type Strap
  • Ground Type copper
25 Foot Long 1.5" Wide Copper Strap
PolyPhaser 25 foot length, 1.5 inch width copper strap

Mount Type
Strap
ProtocolApplication
25' x 1.5" wide copper strap
Ground Type
copper
View Complete Details

Vdc Pass RF Protector

  • RF Power 100 Wrms
  • Turn On Voltage ±66 Vdc
  • Frequency Range 1.75 MHz to 400 MHz
Vdc Pass RF Protector
Hybrid, multistage, multi-strike, fast response, high current capacity, 60 Vdc pass coaxial lightning protector configured with N female connectors for RF operating between 40 MHz and 400 MHz (telemetry 1.75 MHz to 25 MHz)

As part of the GX series of coaxial RF lightning arrestors, the BGXZ-60NFNF-ALT uses hybrid circuit technology to integrate quick response silicon avalanche suppression diode (SASD) with the surge handling capabilities of a MOV and gas tube. With operational voltage of 60 V and RF power (RMS) of 100 W, the DGXZ offers superior DC pass surge protection for mission critical RF networks.
View Complete Details

24 Vdc Silicon Panel Protector - Transtector TSP 8601

  • Dimensions (cm) 5.4 x 5.4 x 2.2
  • Line Voltage 24 Vdc
  • Connector Wire-in
24 Vdc Silicon Panel Protector - Transtector TSP 8601
Advanced silicon surge protection for 24 volt acdc lines

Mount Type
Panel 2 screws
Other Features
3 six-inch leads
Receptacle
hardwire
Line Voltage
24 Vdc
Connector
Wire-in
ProtocolApplication
POTS
Dimensions (cm)
5.4 x 5.4 x 2.2
Dimensions (inches)
2.1 x 2.1 x 0.9
View Complete Details

Outdoor RJ-45 Bulkhead Mount

  • Weight (Kg) 0.1 kg
  • Dimensions (cm) 3.6 x 3.6 x 10.0
Outdoor RJ-45 Bulkhead Mount - Transtector (Thunderbolt) TB GbE PoE
The TB PoE (Thunderbolt) is an outdoor, gigabit PoE surge protector engineered by Transtector for signal throughput for RJ-45 bulkhead mount applications. One weatherized strain relief is included with unit for ease when bulkhead mounting. If other mounting methods are used, additional strain relief parts can be ordered in packages of five (part number 1000-1334)

Features

RJ 45 bulkhead connector
Small form factor
Aluminum housing provides weather-tight mounting options
Designed to support multiple mounting and grounding configurations
Supports standard Cat55e cables
View Complete Details

Outdoor Bulkhead Mount Cat5e GbE Protector

  • Weight (Kg) 0.1 kg
  • Dimensions (cm) 3.6 x 3.6 x 10.0
Outdoor Bulkhead Mount Cat5e GbE Protector - Transtector (Thunderbolt) TB GbE
The TB GBE (Thunderbolt) is an outdoor, Cat5e, RJ-45, bulkhead mount, IP 67, surge protector for signal throughput for gigabit Ethernet applications. One weatherized strain relief is included for bulkhead mounting. If other mounting methods are required additional weatherized strains can be ordered in packages of five, through part number 1000-1334
View Complete Details

Silicon POTS Data Protector

  • Weight (Kg) 0.1 kg
  • Dimensions (cm) 5.0 x 5.0 x 2.2
Silicon POTS Data Protector with 12 Inch Cord - Transtector TSJ
Silicon surge protection for dial-up equipment with 1 foot cord

Standards
R56 Telephone & Network Surge Protection
Other Features
1 foot cord
Receptacle
RJ-11
Connector
RJ-11
ProtocolApplication
POTS
Weight (kg)
0.1 kg
Weight (lb)
0.15
Dimensions (cm)
5.0 x 5.0 x 2.2
Dimensions (inches)
2.0 x 2.0 x 0.875
Motorola Part
DSCP2278
View Complete Details

DC Pass Straight Sampler Port (Kit Of 6)

  • Frequency Range dc to 3 GHz
  • RF Power 1 kW @ 10 MHz, 100 W @ 1 Ghz, 45 W @ 3 Ghz
DC Pass Straight Sampler Port (Kit of 6)
DC pass straight sampler port, dc to 3 GHz, indoor use only

Type
DC Pass
PIM Rated
N
Standards
RoHS compliant
Connector
N
Frequency Range
dc to 3 GHz
RF Power
1 kW @ 10 MHz, 100 W @ 1 Ghz, 45 W @ 3 Ghz
VSWR
dc to 3 Ghz @ 1.1 to 1
Insertion Loss
dc to 3 Ghz @ 0.1dB
ProtocolApplication
Sampler Port, Indoor Use Only
View Complete Details

Low Inductance Copper Grounding Kit

  • Mount Type Ground Kit
  • Ground Type copper to copper strap
Low Inductance Copper Grounding Kit
Copper to copper grounding kit with supplemental hardware for low inductance grounding - 14" to 2-18" diameter
View Complete Details

Hybrid +15 Vdc Pass RF Protector

  • Type DC Pass
  • RF Power 1 Wrms
  • Frequency Range dc to 50 MHz
Hybrid +15 Vdc Pass RF Protector
Hybrid, multistage, multi-strike, fast response, high current capacity, +15 Vdc pass coaxial lightning protector configured with TNC female connectors for RF operating between 0 to 50 MHz.

Part of the GXZ series of DC pass filter protectors the AGXZ is ideal for RF coaxial applications where DC is required. The GX Series can be used on GPS and point to point radios as well as active tower mounted electronic equipment. Click here to view the full line of GX Series RF lightning protection products by PolyPhaser.
View Complete Details

Ground Strap Adapter Kit

  • Ground Type copper
Ground Strap Adapter Kit for SX Series DIN Connectors
PolyPhaser DIN Ground Strap Kit

Mount Type
Ground Kit
ProtocolApplication
Providing optional mounting configurations for SX series DIN connectors
Motorola Part
DSGSAKITD
Ground Type
copper
View Complete Details

VHF High Performance PIM Protector

  • Standards CE, RoHS, IEC 60529 IPC 67
  • Connector DIN
  • Insertion Loss ≤0.1 dB
VHF High Performance PIM Protector
DC block, lightning protection, engineered for PIM and high power of combined signal operating up to 750 W between 100 MHz to 512 MHz band pass configured with DIN female equipment and DIN male surge side connectors
View Complete Details

PolyPhaser Copper Cleaning Kit

  • Ground Type copper
A Kit for Cleaning Copper Before Connections
PolyPhaser Copper Cleaning Kit used to clean copper before installation of grounding equipment
View Complete Details

RS422 Data Line Surge Protection-Transtector TSP-9002

  • Dimensions (cm) 80mm x 55mm x 16mm
  • Weight (lb) 0.15
RS422 Data Line Surge Protection-Transtector TSP-9002
TSP offers best in class features using SASD technology for fast response time, low impedance per line of 33 ohm and ease of use mounting for indoor installations.

Features

Protection Modes: Line to Line and Line to Ground
Knee Voltage 16 V at 1 mA
Pins Protected (1, 2, 4, 5)
RoHS compliant
View Complete Details

High Pass Filter Protector

  • Type DC Block
  • Dimensions (cm) 6.9 x 1.3 x 1.3
  • RF Power 10 W
High Pass Filter Protector
Patented SX radio frequency dc blocked filter protectors are ideal for RF coaxial applications where dc is not required.

The AL-LSXM is part of the SX Series of PolyPhaser RF high pass filter protectors. Engineered to international standards, the AL-LSXM provides RF Power of 10 W using N-female connectors in an aluminium housing. The coaxial high pass filter by PolyPhaser provides DC block technology with high surge current and multi-strike capabilities.

Features

RoHS compliant
High surge current capability
Low let-through voltage and throughput energy
DC shorted filter design, no dc continuity between center pins
Ideal use for applications where DC is not required on the coaxial cable
Fully weatherized housing
Elongated female connector allows for mounting through a 14" bulkhead or grounding bar
Multi-strike capability
View Complete Details

3Vdc DXR DS3 Silicon Module

  • Dimensions (inches) 3.25 X 3.13 X 0.37
  • Weight (lb) 0.2
3Vdc DXR DS3 Silicon Module (Bracket, Chassis or Wall Mount) - Transtector DSX DS3 Module
The DXR DS3 modules provide non-degrading, fast-acting, high performance surge protection for continuous operation of your network equipment
View Complete Details

Flange

  • Ground Type Aluminium
Flange to Bulkhead Type N Adapter Kit
Flange bracket to mount PolyPhaser six filter lightning protectors
View Complete Details

Hybrid -60 Vdc Pass RF Protector

  • Frequency Range 5MHz 10MHz 50MHz-400MHz
  • Turn On Voltage -66 Vdc
Hybrid -60 Vdc Pass RF Protector

PolyPhaser BGXZ-60NFNM-AS
Hybrid, multistage, multi-strike, fast response, high current capacity, -60 Vdc pass coaxial lightning protector configured with N male equipment side and N female surge side connectors for RF operating between 5 to 10 MHz and 50 to 400 MHz
View Complete Details

Broadband Dc Pass Protector

  • Surge Side Connector Bi-Directional N
  • Dimensions (inches) 3.55" x 1.15" x 1.32"
  • Weight (lb) .25lbs
Broadband dc Pass Protector
DC Pass RF lightning surge protection. Replaceable gas tube unit designed for frequency ranges from dc - 2.4GHz.
View Complete Details

Bias-T With Lightning Protection

  • RF Power 300 W rms average
  • Frequency Range 400 MHz to 1.2 GHz
Bias-T with Lightning Protection
Integrated bias-t, hybrid, multistage, multi-strike, fast response, high current capacity, +15 Vdc pass coaxial lightning protector configured with N female connectors for RF operating between 400 MHz and 1.2 GHz
View Complete Details

Bi-Directional 4.3-10 Connector

  • Frequency Range 698 MHz to 2.7 GHz
  • RF Power 750 W
The TSX-4310FM offers ultra-low PIM through a 4.3-10 connector design. This bidirectional DC Short surge protector is ideal for 4G LTE and cell bands between 698 MHz to 2.7 GHz.
Features

PIM -112 dBm (2x5W) input
Multi-strike capability
Bulkhead mounting
4.3-10 connector
Fully weatherized housing
View Complete Details

Coaxial Nuclear EMP Protector

  • Frequency Range 1.5 MHz to 700 MHz
  • Turn On Voltage 330 Vdc ±20%
Coaxial Nuclear EMP Protector
RF coaxial protection engineered for quick turn on to protect RF equipment operating in the frequency range of 1.5 to 700 MHz against fast rising electromagnetic pulse, configured with N male surge side and N female equipment side connectors
View Complete Details

Supplemental Hardware

  • Mount Type Ground Kit
  • Ground Type copper
Supplemental Hardware and Materials to for Low Inductance Grounding
PolyPhaser supplemental hardware and materials to for low inductance grounding
View Complete Details

Wall Mount CPX Enclosure

  • Connector RJ-45
  • Dimensions (inches) 2.00 x 7.00 x 3.41
Wall Mount CPX Enclosure - Transtector CPX
Compatible with CPX series protection modules for protection of T1E1, 10100 Ethernet, 101000 Gigabit Ethernet, 10 100 PoE, and 48V dc power.

Features

Dual lug grounding studs
Front access, modular for multi-protocol installations
Compact 4 port chassis
View Complete Details

Bi-Directional High Pass Filter Protector

  • RF Power 2.5kW @ 400MHz
  • Protected Side Connector Bi-Directional D
Bi-Directional High Pass Filter Protector
DC short, bi-directional operation coaxial RF protector, engineered for high power of combined signals operating between 300 MHz and 1.2 GHz
View Complete Details

75 Ohm Coaxial Lightning Surge Protector

  • Insertion Loss ≤0.2 dB
  • Frequency Range 4 MHz to 900 MHz
75 ohm Coaxial Lightning Surge Protector
75 ohm coaxial protector configured with F female connectors for 4 MHz to 900 MHz
View Complete Details

Dc Blocked Protector High Power

  • PIM Rated N
  • Frequency Range 125 MHz to 1.0 GHz
dc Blocked Protector High Power
Bulkhead mounted, dc block, single transmitter coaxial lightning protection for 125MHz to 1000MHz with N male surge side and N female protected side connectors
View Complete Details

DC Data Signal Protector

  • Weight (Kg) 0.14 kg
  • Dimensions (cm) 8.53 cm x 7.29 cm x 3.51 cm
Silicon, modular, DC data signal protector with LED indicator - Transtector DRI-24LV
Desgined to protect DC datasignal circuits and provide positive status indication for all suppression components.

Features

Silicon Avalanche Technology
WAGO Cage Clamp Terminal
Signal Rate-DC Power to 30 Kbs
Standby Power 12 Vdc min
Replacement Module Part Number DRI-24LV-SM
View Complete Details

DC Block EMP Protector

  • Insertion Loss ≤0.1 dB
  • Frequency Range 10 MHz to 700 MHz
DC Block EMP Protector
RF coaxial protection, compliant with Buy American Act. Engineered for quick turn on to protect RF equipment operating in the frequency range of 10 to 700 MHz against fast rising electromagnetic pulses.

Features

Buy American Act Compliant
Low throughput energy
High surge current capability
View Complete Details

45 V Silicon Clip Mount Protector - Transtector PBM

  • Weight (Kg) 0.1 kg
  • Dimensions (cm) 4.5 x 2.3 x 1.1
45 V Silicon Clip Mount Protector - Transtector PBM
Silicon surge protection for data with 45 V peak on a 66 punch down block, clip mounted and twisted pair connector

Features

Ground connection achieved with installation of ground bar assembly 1101-621
R56 Telephone & Network Surge Protection
View Complete Details

DC Pass Surge Arrestor

  • Dimensions (inches) 1.30 x 1.25 x 3.47
  • Frequency Range 1.2 GHz to 1.6 GHz
GPS Lightning Protection - DC Pass Surge Arrestor
PolyPhasers new GPS series offers unmatched GPS Lightning Protection. The PolyPhaser GPS product line incorporates non-degrading SASD technology into their family of DC Pass RF surge protectors. The GPS Series built in SASD technology ensures dependable performance that does not degrade after a lightning strike.

Note - Minimum Order Quanity of 500 pieces
Alternative Connection Types
View Complete Details

VHF High Power Combiner Protector

  • Standards CE Compliant, Bellcore #TA-NWT-000487
  • RF Power 750 W
VHF High Power Combiner Protector
DC block, lightning protection, engineered for high power of combined signal operating up to 750 W between 100 MHz to 512 MHz band pass configured with DIN female equipment and DIN female surge side connectors
View Complete Details

280 Vdc Silicion Protector

  • Weight (Kg) 0.1 kg
  • Weight (lb) 0.2
  • Dimensions (cm) 5.4 x 5.4 x 2.3
280 Vdc Silicion Protector - Transtector FSP
Silicon surge protector for data and dial-up double wire pair (4 Wire and other balanced pair) equipment
View Complete Details

8 Port Modular Bulkhead Panel

  • Mount Type Entry Panel
  • Ports 8
8 Port Modular Bulkhead Panel
All inclusive modular 8 port copper coaxial entry panels that provide a single point structure for grounding multiple grounds. This product will accommodate cable sizes from 12" up to 3 18" in diameter and can be arranged side by side for increasing the number of entrance panels.
View Complete Details

Bridge Clip Silicon Surge Protection

  • Weight (Kg) 0.1 kg
  • Dimensions (cm) 4.45 x 2.29 x 1.02
Bridge Clip Silicon Surge Protection for 66 Punch Down - Transtector PBM
Bridge clip silicon surge protection for 66 punch down block with user defined surge modules and a metal ground strip to connect protectors via the PBM grounding. Ground Bar Sold Separately

Features

Line and load bidirectional protection
Non-degradable, low clamping, leadless silicon diode protection
Metal ground strip to connect protectors via the PBM grounding studs
View Complete Details

AISG Telemetry DC Bias T Device

  • Insertion Loss 698MHz to 1GHz, 1.7GHz to 2.7GHz @<0.1dB, 2.176 MHz <0.4db
  • RF Power Max AVG: 1.5kW @920MHz, PK Power: 5kW
DC Bias-T with AISG Telemetry
Duel frequency range 698MHz to 1GHz, 1.7GHz ro 2.7GHz RF, 2.176MHz
Features

50 Impedance
Weather Proof When Installed
View Complete Details

Shielded RJ45 Data Line Protector

  • Connector RJ-45
  • Weight (lb) 0.15
  • Dimensions (inches) 3.20 x 2.20 x 1.68
Shielded RJ45 data line protector - Transtector TSJ PoE INJ48
The TSJ-PoE Surge Suppression designed to protect equipment against transient overvoltages on Power and Ethernet applications. Please contact 1.800.882.9110 or 1.208.772.8151 for product availability.
View Complete Details

DC Blocked Protector

  • RF Power HF 2kW, VHF 375W, UHF 125W
  • Motorola Part DQIS50NXC0
DC Blocked Protector
Flange mounted, dc block, single transmitter coaxial lightning protection for 1.5 MHz to 700 MHz with N female surge side and N female protected side connectors.

The IS-50 product family is based on PolyPhaser's patented surge protection technology. This engineered surge suppressor has been the cornerstone for lightning arrester antenna applications used by ham radio operators, land mobile communications and remote industrial monitoring. The IS-50 is approved by major OEM's for use in critical applications such as emergency response, SCADA and public safety communications.
View Complete Details

Transtector DXR Module

  • Dimensions (inches) 3.3 X 3.2 X 0.4
  • Connector RJ-45
T1E1 DXR Module -Transtector DXR Module
Standards
UL 497 A
MCOV
6 Vpeak
Other Features
avalanche diode technology
Receptacle
RJ-45 Cat 5e
Data Rate
100 Mbs
Connector
RJ-45
ProtocolApplication
Ethernet
Weight (lb)
0.2
Dimensions (inches)
3.3 X 3.2 X 0.4
View Complete Details

8 Port Modular Earthed Entrance Panel

  • Ports 8
  • Mount Type Entry Panel
8 Port Modular Earthed Entrance Panel
All inclusive modular 8 port copper coaxial entry panels that provide a single point grounding structure for multiple grounds. This product will accommodate cable sizes up to 3 18" in diameter and can be arranged side by side for increasing the number of entrance panels.
View Complete Details

75 Ohm Coaxial RF Surge Protection

  • Frequency Range DC to 2.5 GHz
  • RF Power 50W @ 100 MHz
  • Connector F Connector
75 Ohm Coaxial RF Surge Protection
Specifically designed to suppress voltage transients and surges on 75 Ohm F-Type coaxial cables. Ideal RF protection for a wide range of applications including GPS, CCTV, HVC, as well as satellite and cable TV.

Features

Hardware hit included
Gas tube technology
Return Loss 28dB @ 1GHz
View Complete Details

Gas Tube RF Protector

  • RF Power 90 W @ 30 MHz, 9 W @ 3 GHz
  • Frequency Range dc to 7 GHz
Gas tube RF Protector
Gas tube lightning protection with excellent VSWR and superior RF performance characteristics for equipment operating between dc and 7 GHz with up to 90 W RF power configured with N female and N male connectors -bidirectional
View Complete Details

PoE CPX Protection Module

  • Weight (kg) ≤0.05 kg typical
  • Dimensions (inches) 0.99 x 1.63 x 2.48
Gigabit Ethernet PoE CPX Protection Module - Transtector CPX
Part of the CPX family of robust, compact, Gigabit PoE surge protectors, the CPX GbEPoE provides low let-thru voltage, while being virtually invisible in the circuit. The 1000-1117 modules are designed to mount in a CPX chassis.

Users can choose either the CPX Chassis (PN 1101-972) allowing up to 16 single width modules to be mounted in only 1 RU of 19 rack space, or the CPX Wall Mount Chassis (PN 1101-1137) which allows up to 4 single width modules to be mounted to a wall or flat surface.
View Complete Details

Cat5e GbE Module Used

  • Connector RJ-45
  • Weight (lb) 0.2
  • Dimensions (inches) 3.25 X 3.13 X 0.37
Cat5e GbE Module Used in DXR Chassis - Transtector DXR
RJ-45 Cat5e GigE cross-connect surge protection DXR module used in DXR chassis PN 1101-875-1
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Chris Penwell (Polyphaser)
  • 2225 Park Place, Minden, Nevada - 89423, United States
  • Share us via