Post Buy Requirement

Our Products

Oxygen Regulator & Knife Switch

The Broco Oxygen Regulator is a two-stage unit delivering the constant flow and high volume required for underwater burning. Broco's research demonstrates cutting efficiency depends more on oxygen flow than oxygen pressure. Broco's high volume regulator is offered to meet this basic requirement. Designed and manufactured for ease of operation, maximum efficiency, and years of rugged use, the Broco Underwater High-Volume Oxygen Regulator is Underwriters Laboratories Listed.
View Complete Details

Ultrathermic Cutting Rod

Broco Underwater announces the latest advancement in underwater cutting - the new advanced design Broco Underwater Ultrathermic (Exothermic) Cutting Rod PLUS. Based on a new patent pending design, this new cutting rod delivers 20% more cutting and burn time than the same size standard Broco underwater cutting rod, and burns more evenly than any rod on the market.

New Broco Ultrathermic (Exothermic) Cutting Rod PLUS rods increase burn time 20% on average, for a 38 inch diameter by 18 inch long rod. The extra seconds allow for longer burn time and more cutting, delivering more Broco quality with increased performance and value to our customers.

Broco Underwater Ultrathermic (Exothermic) Cutting Rod PLUS rods are now available in 38 inch diameter by 18 inch length, and in 38 inch diameter by 36 inch length.

Call the Broco Sales and Customer Relations team at (800) 845-7259 for questions and more information or feel free to email us at ProductInfo@brocoinc.com. We'd love to hear from you and provide you with excellent service.
View Complete Details

Electrodes

For many non-structural repairs the resultant weld is allowed more leeway in terms of porosity, inclusions, integrity and appearance. To fill the void between to-code work and economy, Broco applied its significant experience and knowledge to design a quality electrode specifically for the economy market. The result is EasyTouch , a moderately priced electrode yielding excellent results. It is easy to light, easy to run (a controllable puddle with rippled bead appearance) and easy to clean. Like SofTouch, EasyTouch is a high deposition all-position electrode.

EasyTouch offers users advantages over other economy priced rods that are more difficult to run, harder to clean, and often need to be grounded and rewelded - all adding to bottom time and increased operating costs.
View Complete Details

Reduce Forearm Fatigue

The BR-22 Cutting Torch is ergonomically designed for diver comfort and reducing forearm fatigue. The torch is constructed from durable high-impact and corrosion resistant materials. Most metal parts are brass. The non-conductive flexible coupler joining the oxygen control valve to the torch head is a key safety feature, unique in design and found only in Broco torches.

Ergonomically designed for diver comfort
High-impact and corrosion resistant materials
Broco torches are easy to maintain. The flash arrestor is brass with an internal filter screen. The large collet nut is knurled to assure the diver a solid grasp. Acme threads prevent binding from mud or other debris insuring quick, reliable rod insertion and retention. Interchangeable collets accommodate 38" and 14" diameter cutting rods.

The BR-22 can also be used as a welding electrode holder. The BR-22 Cutting Torch is built to deliver years of trouble-free performance at minimum cost. We strongly recommend keeping spare parts on hand. Kits are available.
View Complete Details

ROV Integrated System

Remotely Operated Vehicle: Cutting and Weld Automation

Broco is pleased to announce a new technology partnership with BluHaptics, Inc. of Seattle, Washington, to deliver an advanced Remotely Operated Vehicle (ROV) solution that will revolutionize the safety and performance of underwater cutting and welding.This new ROV can be used in exothermic cutting, cold cutting and wet welding, and offers

Safety and safeguarding of operator and equipment
Force feedback and 3D sensor integration
Man-like dexterity
Project cost reduction
For more information please see our press release in the news section.
View Complete Details

Broco Underwater Cutting Torch

Broco, Inc., the world leader in underwater cutting and welding systems, introduces the next generation underwater cutting torch. This new torch features 21 design improvements, including the removal of all rubber from direct oxygen pathway, a PTFE lined fiberglass reinforced coupler hose, improved flash arrestor with higher oxygen flow rate and better flash back protection, non-return valve to prevent back flow, and improved collet and collet washer design.
View Complete Details

Underwater Ultrathermic Cutting Rods

Burning in excess of 10, 000 F at the tip, Broco Underwater Ultrathermic (Exothermic) Cutting Rods cut or melt virtually any known material. Broco's patented rod design features alloy core wires retained by circular crimps. The special design prevents burnback into the torch. Ultrathermic (Exothermic) Cutting Rods can be bent 90 degrees or more to access hard to reach places without restricting oxygen flow or causing insulation to split or flake off.

These rods may be used with a maximum of 150 amps to assist in the burning process and have no electrical requirement. Once ignited, they continue to burn as long as oxygen is supplied or until the rod is consumed. Broco Underwater Ultrathermic (Exothermic) Cutting Rods are available in 14 inch and 38 inch diameters. Standard length is 18 inches. Broco offers 36 inch Ultrathermic (Exothermic) Cutting Rods for heavier jobs allowing more burn time between rod changes.
View Complete Details

Prevent Rod Loss

The highly durable Broco Underwater QuiverPak is made of sturdy polyethylene and has a reclosable cap that can be tied to the main container to prevent loss. An indentation just below the cap allows for a carabiner to be easily attached to a dive harness and used as a quiver. It can also be used to lower a box of rods from the surface to a diver below.

The Broco QuiverPak holds up to 50 Broco 38"x18" Ultrathermic (Exothermic) Cutting Rods. The polyethylene quiver reduces the risk of rod corrosion while in storage.

Make sure your system is complete with the Broco Underwater Cutting Sytem. Divers love it!

Call the Broco Sales and Customer Relations team at (800) 845-7259 for questions and more information or feel free to email us at ProductInfo@brocoinc.com. We'd love to hear from you and provide you with excellent service.
View Complete Details

Reduces Diver Fatigue

The Broco BR-21 is the new generation compression type underwater welding stinger engineered with superior features. The BR-21 is lightweight, durable and designed to hold the electrode at the optimum angle to reduce diver fatigue.

Selected features of the BR-21 include:
Index notch on the head helps divers find the hole, even in the dark. Improves rod insertion in low-visability environment.
Beveled seat keeps electrode at ideal angle. Groove eliminates electrode "wiggle."
Over-sized head is easier to hold.
Resistance O-ring on the shoulder ensures tension when head is tightened, increasing head life.
Handle and head are from hexagonal stock and provides diver with a solid grip with a gloved hand while welding.
Take a look at our EasyTouch Electrodes. They're a great, quality electrode for the economy market! You may also like our SofTouch Stainless Steel Wet Welding Electrodes, perfect for on-site repairs where steel must be joined underwater according to code specs.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Protective Metal Alloys, A Division of Broco-Rankin)
  • Ontario, CA 91761 map, United States
  • Share us via