Other Products / Services #5166609

The Graco PGM (Precision Gear Metering) Metering System delivers a smooth, consistent bead dispense even with high-viscosity materials. And because it also provides higher flow rates, manufacturing facilities can dramatically improve production capacity and ROI. Ideally suited for: Solar panel manufacturing Automotive windshield manufacturing Handles a range of materials:Ambient, warm melt and hot melt materials to 400F (204C)Low to high-viscosity materialsUnlimited volume Improve your production capacity with PGM's high flow rates: Provides high flow rates:Up to 600 ccmin for ambient materialsUp to 300 ccmin for high viscosity hot melt materials Smooth, consistent bead dispense - even at high flow rates Offers clean starts and stops for less material waste Bead control saves material costs Wrist-mountable design assures precise dosing control Touch-screen controls are easy to use, easy to integrate

Supply Systems- Bulk material unloader for ambient sealants, adhesives and other medium to high-viscosity materials For large drums up to 200 liter (55 gal) Graco D200 - For high-volume in-plant applicationsGraco D200s - For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials For pails up to 60 liter (16-gal) For 20, 30 and 60 liter (5, 7, and 16-gal) pail sizes. Provides the same proven technologies as the larger systems, but with small NXT Air Motors.Graco L20c - A lightweight, elevator ram on a cartGraco S20 - For low-volume applications of medium to high-viscosity materialsGraco S20c - Same as the S20, but includes a cartGraco D60 - Provides higher down-force and 60-liter pail capacity Features include: Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum or pail Platen wipers can be replaced in seconds Pump's quick-disconnect coupler, turbuckle mount and pump cartridge packings let you service the pump without removing it from the ram High-quality, durable parts reduce maintenance time, maximize uptime

1K Ultra-Lite- Precision Dispense Valve for precise bead dispensing of sealants and adhesives. The1K Ultra-Lite valves are top-of-the-line, lightweight, compact valves designed for long service. Features include: Manual and automatic versions available Lubricated packings for longer seal life Severe-Duty needle and seat Eliminates snake-head and material drip Adjustable forward travel to reduce material surge

InvisiPac is a Tank-Free Hot Melt Adhesive Delivery System. With the Graco InvisiPac, youre up to operating temperature and running production in less than 10 minutes. Because its engineered with a Tank-Free design, adhesive spends less time at high temperature, significantly reducing char and its negative side effects. You get great performance even from low cost adhesives allowing you to keep your packaging line up and running. Features include: Vacuum system feeds pellets to an in-line melt chamber- Pellets are automatically added as needed The InvisiPac System sends a continuous flow of adhesive through production - significantly reducing the time adhesive spends at high temperature Quick start-up ready in less than 10 minutes, eliminating costly downtime No tank adhesive supplied and melted to meet your applications demand means less adhesive time at high temperature Less adhesive time at high temperature means less char and less material degradation Less char results in reduced nozzle plugging, less system maintenance and more uptime Great performance, even with low-cost adhesives

SaniForce 1040 Double Diaphragm Pump: 1 inch air-operated double diaphragm sanitary pump with flow rates up to 40 gpm (151 lpm) - ideal for food-related applications. One of the best, most durable, lube-free air valves in the industry. Ideal for applications requiring high flow rates and portability, Gracos dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE and overmolded EPDMPTFE. SaniForce 1040 Double Diaphragm Pump1.5 in (38 mm) Tri-clamp connectionAll fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)Flow rates of 40 gpm (151 lpm)High volume evacuation of liquid concentrates from holding vesselsrepackaging of fluids from original container to smaller receptacles - up to 10, 000 cpsSuitable to pump: concentrated fruit juices, sauces, pastes, starches, wine, food-grade oil, jams and jellies Patented, lube-free air valveThree-way pilot valve for no-stick operationIncrease durability and reduce repair time with fewer moving parts1040, 1590 and 2150 SaniForce pumps use common center sections100% externally serviceable air valve PTFEEPDM Overmolded DiaphragmsOvermolded diaphragm plate w PTFE on the fluid side & EPDM on the air side- no place to harbor bacteriaImprove wear and diaphragm life with no exposed diaphragm plate on the fluid sideLonger diaphragm life in abrasive applications that still require PTFE

Upgrade without the upcharge! Our MP3000 Series Viscosity Controller offers an entirely new standard of versatility and economy in a compact PLC Touch Screen package. Save set up time with simple, easy to understand menus User friendly intuitive touchscreen interface Separate PLC with two (2) 4-20 madc each analog inputs & outputs Set point viscosity control with solvent and make up fluid additions Set point pH control with amine extender & water additions- Save set up time with simple, easy to understand menus - User friendly intuitive touchscreen interface - Separate PLC with two (2) 4-20 madc each analog inputs & outputs - Set point viscosity control with solvent and make up fluid additions - Set point pH control with amine extender & water additions>

The Ultra-Lite 6000 Pistol Grip Flow Gun for precise control of low-to-medium viscosity materials. The operator-friendly Ultra-Lite 6000 combines ergonomic design with high-operating pressure for dispensing low-to-medium viscosity industrial and automotive sealants and adhesives. Features include: Operating pressures to 6000 psi (414 bar; 41.4 MPa). 150 headhandle angle is more comfortable for operator Changeable tips for a variety of dispensing needs Lightweight with convenient trigger pull

The Maple 20 AFP piggable pump is the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is the industry leader for reliable operation, simple maintenance and hydraulic efficiency. The Maple 20 operates at 4.2:1 ratio, delivering 7.5 GPM at 60 cycles per minute. Features include: Handles the Troublesome and Difficult Coatings- From high solids to CARC to UV as well as moisture sensitive to shear sensitive Backup seal ensures you can keep on pumping until the next shift Quick exhaust valve enables rapid switchover and smooth flow Simple to Maintain- No "upper seal" to keep lubricated or adjusted Hydraulically Efficient- Piston seals are always engaged. If the air motor is consuming air, you're moving fluid, unlike some competitive designs.

The Dispensit 1095 is a positive displacement, controlled-flow metering rod valve, designed to produce precise beads of materials of nearly any viscosity. Features include: Controlled flow positive displacing metering valve Simple control Precision hydraulic flow control Ideal for dispensing high-viscosity gasketing materials Delivers uniform beads

In-Line Flow Guns for precise control of low-viscosity sealants and adhesives. Handles: PVC sealers with glass or plastic filler Low to high abrasive fluids Waterborne or solventborne materials Most fluids up to 150, 000 centipoise Features include: Well-suited for dispensing onto horizontal surfaces Selectable trigger lock and hanger slot for operator convenience Accepts flanged or threaded tips for a variety of dispensing needs 204355 has rugged, lightweight design 240199 has lowest trigger force and weight in its class

Incorporating our new VTS no moving parts viscosity sensor, custom designed heat exchanger and optional pH electrode, in an easy to install modular package; our StablINK system is designed to eliminate process fluid variables by reducing temperature fluctuations caused by atmospheric conditions, press speeds or other process inconsistencies.

950 Series sealant guns replace caulk guns in high-volume operations. They dispense sealants from 2.5, 6 and 12 oz. (74, 177 and 355 ml) cartridges. All metal rugged construction Knob is permanently captured onto the gun body Pistol grip or palm grip Air-powered or manual-operated. Features include: All metal rugged construction Knob is permanently captured onto the gun body Pistol grip or palm grip Air-powered or manual-operated

Series 8100- Super-Mini Tee Type Filters(2.0" x 3.75') Compact Sizeup to 10, 000 PSI. 1.5 GPM 50 SCFM Stainless Steel ConstructionLight-Weight: 2.5 lbsPorts: 14" NPT

The Anti-Condensation Compressed Air Temperature Control System by Saint Clair Systems is a patented approach to keeping turbine air above the dew point. The SCS 2100AH mounts outside the explosion-proof environment and uses water to transfer heat to the associated air heaters located within 3' of the turbine drive air inlet. This temperature control approach eliminates condensation and the problems that it creates!

Re-Corable Coaxial Hose Heat Exchanger The pictures to the left shows our patented point of application Re-Corable Coaxial Hose Heat Exchanger used in production for validation testing. It is also a tube-in-tube heat exchanger design which allows temperature control to be added without any change in the existing material flow path.The system is flexible enough to use in robotic or manual operations and provides temperature control all the way to the gun.

The SCS Temperature Control Unit (TCU) monitors and maintains material temperature by heating or cooling during adhesive and sealant dispense operations. The TCU circulates closed-loop conditioning water through heat exchangers and ancillary components to ensure proper temperature of the material at the point-of-application. In addition to maintaining the high viscosity of sealers and adhesives, the TCU sealer system & adhesive system accommodates the parameters unique to these applications: frequent heatcool switching; lower dispense volumes at higher dispense pressure; and temperature control within non-circulating or "dead-end" protective coating systems. SCS makes accurate control in such conditions routine. Also routine are the benefits that come with temperature and viscosity control, including: minimized rework, fewer production-line stoppages, and an improved bottom line.

coil-coating systems eliminate inconsistencies in manual viscosity measurements and adjustments by controlling viscosity with temperature. Saint Clair Systems has developed methods to measure and analyze, in real time, the temperature of coating material across the width and length of the strip, ensuring consistent film builds from edge-to-edge and head-to-tail. With the ability to control material temperature, you can ensure a stable and repeatable coating viscosity. This allows other process variables, such as roll speeds and nip pressure, to become definable and repeatable, reducing set-up time and scrap.

The Maple 30 pump is the finishing industry's best pump solution. Contains the best air motor and the best fluid section and is the industry leader for reliable operation, simple maintenance and hydraulic efficiency. The Maple 30 operates at 3:1 ratio, delivering 12 GPM at 60 cycles per minute. Features include: Handles the Troublesome and Difficult Coatings- From high solids to CARC to UV as well as moisture sensitive to shear sensitive Backup seal ensures you can keep on pumping until the next shift Quick exhaust valve enables rapid switchover and smooth flow Simple to Maintain- No "upper seal" to keep lubricated or adjusted Hydraulically Efficient- Piston seals are always engaged. If the air motor is consuming air, you're moving fluid, unlike some competitive designs.

Manufacturer: Gleason ReelModel: Hand LampMPN: EHL-120Hand Lamp Includes: Plastic Grip Switch Metal GuardReflector Receptacle

FANUC Robotics P-250iA series paint robots offer the industrys best solution for your large and mid-size painting needs. In addition to providing the industrys best work envelope and motion performance, they offer many features that enable maximum throughput, optimal quality, and low operating costs. The P-250iA is designed for efficient process equipment integration with features such as a hollo wrist, an option for two motors on the outer arm for gear pumps, an outer arm designed for easy integration of paint application equipment and multiple hose routing options. The P-250iA is available in both the P-250iA 15 full-size arm and mid-size arm P-250iA 10S to right size the robo for the application. The robot can also be mounted for elevated, in-booth and clean wall floor style rails. This flexibility provides maximum use of the product in a variety of applications. An excellent replacement for manual sprayers and older automation, the P-250iA robot (with optional rail solutions) provides a reach that gives process flexibility to maintain precise target distances and gun orientations over the largest of parts maximizing quality.

PLC Based Controller for up to 10 stations 10"" Fully Functional Touch Screen Manual or Automatic Control High, low, level alarm outputs Adjustable control values Scalable Trend Plots Additional Temperature or pH input display Converted value readout including: Zahn, Ford & Shell Cup, cPs, cSt, SSU etc. - 10"" Fully Functional Touch Screen - Manual or Automatic Control - High, low, level alarm outputs - Adjustable control values - Scalable Trend Plots - Additional Temperature or pH input display - Converted value readout including: Zahn, Ford & Shell Cup, cPs, cSt, SSU etc.

LED Lamp Includes: Cushioned Hand Cap with Internal Ballast Covered ONOFF Switch in Handle Clear Polycarbonate Lens with Reflector Label and Cushioned Outer Ring Produces 920 Lumens 12 Watt LEDs rated @ 50, 000 hours One-watt LED flashlight at the end of the fixture 120 Volt, 0.65 Amps, 50-60 Hz.

Precision Filter DiscsSFD-2000- Precision Filter Discs High Quality 304 Stainless Steel10 thru 150 Micron Absolute

The Norcross Invisible Controller is software which operates with any PLC that has a touch-screen interface, to provide full monitoring and control of up to 10 stations utilizing Norcross viscosity sensors. Eliminating the need for multiple controllers, this viscosity control software can provide trend plots in real-time for each station, data logging up to seven days, and permits set-point and other viscosity parameter adjustments on-the-fly. Custom installed and fully integrated into a users system, the Norcross Invisible Controller software simplifies the operator interface and creates a single report for the entire system. It is compatible with popular PLCs such as Allen-Bradley, Mitsubishi, Rockwell, and Siemens. Typical applications include printing inks, chemicals, coatings, lacquers, and adhesives. The Norcross Invisible Controller is offered to users of Norcross viscosity sensors to save them the expense of purchasing a duplicate PLC.

The Norcross In-Line pH Sensor installs directly in a fluid line to monitor pH and incorporates a transmitter which converts its mV signal to 4-20 mA for transmission to a controller. Featuring a flat tip probe with a glass insert, this sensor has a patented integral reservoir which traps fluid to keep the probe tip wet during job changes and prevent drying out; a problem which often reduces or destroys the effectiveness of conventional sensors. Suitable for any process where pH is an important parameter to be measured and controlled, the Norcross In-Line pH Sensor can be used with the firms VISC and MP-2000 controllers which let operators establish a pH set-point and automatically add amine or other ingredients as required. Applications include many liquid chemical processes such as water-based printing inks, food production, pharmaceutical, and general manufacturing

DynaMite Dispense Valve- Improve quality and minimize rework. The DynaMite valves are used with DynaMite 190 for small-scale assembly operations. Features include: Precise beaddot diameter and positioning Wetted parts are made of SST, PTFE, and acetal to provide wide fluid compatibility Valve can be converted from manual trigger (pistol grip) actuation to fixtured automated actuation

BGK Finishing Systems offers the industry leading technology in Oil Filter Curing Systems. Utilizing flexible, efficient, high-intensity electric infrared curing technology, BGK modular designs meet individual production specifications.Typical system components:Chain-on-edge conveyorCoating boothCool downInfrared ovenRotatorsAir knife stationAutomatic load stationUnload station

The ViscSense Viscosity Control system features an intuitive touch screen controller and employs a compact acoustic wave sensor that can be installed in-line within a process, regardless of orientation, to continuously monitor viscosity and temperature. Unaffected by flow or vibration, this viscosity control system has no moving parts and can measure low shear viscosities from 0-600 mPa s and temperatures to 105C, depending upon the material. Providing on-the-fly readouts in any cup value, the ViscSense Viscosity Control System is suitable for use with low viscosity coatings or inks and applications with from one to 10 stations. Compatible with any PLC, the controller operates on 24 VDC and provides 4-20 mA, RS232, and CANBUS outputs. The sensor weighs 249 grams and has a NPT pipe connection.

The Norcross LabPak Viscometer is a simple to use mechanical device which utilizes a piston to measure time-of-fall up to 20 seconds, with accuracy to within .01 second. Capable of measuring changes in viscosity as small as 0.02 CPS, depending upon the water or solvent based liquids being measured, it displays viscosity in ""Norcross Seconds"" Time-Of-Fall. Featuring a removable sleeve that accommodates samples down to 6ml, as well as larger samples in beakers, the Norcross LabPak Viscometer consists of all stainless steel wetted parts and open rod construction. Easy to clean, this laboratory viscometer works under atmospheric pressure, has a 3-way 24 VDC air valve, and requires 40 psi dry air and 100240 VAC.

The Norcross VISC1000 Viscosity Control System can monitor and control from 1 to 3 stations and features a touch screen interface that displays process parameters and trend data for each station. Displaying set-point, actual viscosity, alarms, and automaticmanual mode for each station, it provides real-time data logging and allows viscosity parameter changes on-the-fly. Suitable for all processes where viscosity is critical, the Norcross VISC1000 Viscosity Control System lets users change each station separately, such as air valve, solvent control parameters, set points, high-low alarms, and color-codes for ingredients. Trend plot software provides data logging for 1 hour up to 7 days and systems are available for up to 12 stations.

BGK's Brake Pad Systems have a modular design to meet each individual production specifications. Systems are available with up to 14 cure lanes wide and handle production rates of 10 to 100 pads per minute.With removable sections for easy maintenance access and an oven top that raises for simplified lamp changes keep your system running at its peak. These systems provide a tough finish that meets film build and brake fluid resistance testing.Highlighted features:Powder Booth Feed Escapement Conveyor (1-3 lanes)Powder Coating Booth (1-3 lanes)Walking Beam Transfer Conveyor (4-14 lanes)Infrared OvenForced Air Cool DownExit ConveyorUnload StationPLC Controls with Operator Interface

Dryingapplied to products that have a lot of moisture, usually introduced by some previously applied chemical or coating process. In drying, the oven moves a constant stream of heated air over the products to take the moisture outBakingtechnique is applied to heat objects over a period of time wout drying them out and curing the coating to the partCuringa slower process where an objectcompound is heated to give it different properties & alter its molecular structure. IR curing can provide zoned control to meet any finishing requirementpart configuration for optimum performance

BGK infrared Heater Modules use T3 quartz emitters in 1600, 2500, 3650, 3800 or 5000 watts. Emitter life is estimated at 5000 hours when operated at full lamp rated voltage; longer life can be expected when operating at a reduced voltage.Standard infrared heater modules are available in lengths of 24", 33", 46" and 66.25" and in widths from 6-96" (in 6" increments).Highlighted features:Full Range InfraredInstant OnOffWide Variety of SizesFlashing, Drying and CuringAll Coating TypesInfinitely Adjustable PowerHeavy Duty ConstructionPolished Aluminum Emitter CoversSelf-Cleaning Ceramic ReflectorApplications up to 100 wattsin2

Fluorescent Hand Lamp Includes: Protected switch Cushioned End Cap Polycarbonate Outer Tube and End Lens Directed Light (from one side plus magnified from end) Integral Ballast 13 watt, 900 lumen PLS-13 Lamp (included)

BGK Finishing Systems offers the time tested Binks Reciprocator. The Binks Reciprocator has been a "Work Horse" in the industry for over 50 years. With horizontal or vertical models, multiple stroke lengths and a variety of standard options, you can create a reciprocator to fit your process needs.Highlighted (standard) features:Horizontal and Vertical ModelsMultiple Stroke LengthsManual or PLC ControlsAdjustable Cam Spray ControlMoveable Base (on Vertical Model)Variable Speed (from 10-300 FPM)Continuous Running or Reversing Stroke

Use the M51 Viscosity Sensor with either solvent or water-based applications, such as printing fluid, glue and adhesives. This Inline Sensor mounts directly in the fluid line and can be used with any Norcross Viscosity Controller.

BGK Finishing Systems is proud to continue the Binks Spindle Master heritage with the Spindle Master II. Using chain-on-edge conveyor technology the Binks Spindle Master's compact, self-contained design is great solution for your painting process. Whether you're starting a new line or working through a conversion, BGK will make a productive and efficient difference.Highlighted features:Adjustable Spray Gun MountingCompact, Self-Contained MachineFive Standard LayoutsSimple and Quick Set-UpSpray Booth with Exhaust FanStandard Spray Control OptionsVFD Drives

PCF Metering System- Precision Continuous Flow Metering and Dispense System. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds providing your operation with a highly precise, continuous dispense. Handles a range of materials:Ambient, warm melt and hot melt materials to 400F (204C)Low to high viscosity materialsUnlimited volume Features inlcude: Advanced Display Module, Fluid Plate, Graco CAN Cable and Gateway Closed-loop "real-time" control ensures a precise, continuous dispense improves part quality and reduces material waste Intuitive user interface simplifies setup, reduces training time Integrated USB interface for easy data downloads - allows for further analysis of process data Multiple gun capabilities for additional productivity - lets you program up to four guns Compact modular design - easy to install, integrate and maintain Low cost of ownership - fewer wear parts compared to shot meters

Independently Controllable Infrared Heat Zones- For purposes of flexibility, the top and bottom infrared heaters are zoned independently. This is very useful when you need to duplicate a customer's oven that may have top heat only. When testing for optimal cure speeds turn on both top and bottom infrared heaters.Accuracy and Repeatability- Repeated testing shows 2% variance on temperature. The oven controller maintains oven parameters so that uniform testing can be repeated, accurately. This oven allows you to check coating performance from batch to batch under the exact same infrared conditions.Temperature Profile Development- As the coatings industry moves toward accelerated cure schedules, you will be able to duplicate any cure time and temperature that your customers require. The BGK IR Smart Oven will allow you to cure, record, document and make changes to virtually any coating cure parameters.Closed Loop Temperature Controls- Rapid response infrared lamps require the speed of optical temperature measurement for consistent heat profiles. BGK has long been a leader in controlling infrared heat sources. Controls are accessed via PLC with an operator interface screen.Four modes of Operational ControlManual http:www.bgk.comportals0imagesmanual.gifEnter desired % power output for the heaters. The start and stop buttons turn the heaters on and off.TimePowerhttp:www.bgk.comportals0imagestimepower.gifEnter desired % power output and the desired amount of time. The temperature the panel achieves is the variable (up to 20 steps possible).PowerTemphttp:www.bgk.comportals0imagespowertemp.gifEnter desired % power output and the desired panel temperature. The time it takes the panel to reach temperature is the variable (up to 20 steps possible).TimeTemphttp:www.bgk.comportals0imagestimetemp.gifA PID control algorithm ramps the part temperature to set-point via operator defined maximum power output rate (slow or fast). The power output required to maintain part temperature is the variable (up to 20 steps possible).Smart Logger (OPTIONAL)- The IR Smart Oven can be equipped with the Smart Logger. This allows for creation of data files to store andor print test data.

Reliable & Economical Series ED Tool Balancer Reels The economical choice for balancing tools weighing up to 5 lbs (2.3kg). Molded ABS housing has a smooth exterior with rounded edges designed for maximum ergonomic appeal. Series ED balancers are the most modern, easiest to adjust, and reliable available. Each balancer incorporates all of the important functions expected of a world class product. Seven Ways Better: 1. Hand-windable spring tension adjustment knob is flush with the housing2. Push-button tension release simplifies decrease of spring tension3. Rugged steel upper swivel hook with secondary safety cable provision4. Over-sized cable opening with direct in-line pull to reduce cable wear270 lb (121.5kg) test 0.047 (1.2mm) dia. 7 x 7 strand galvanized steel aircraft cable nylon covered to 0.063(1.6mm) O.D. 5. 270 lb (121.5kg) test 0.047 (1.2mm) dia. 7 x 7 strand galvanized steel aircraft cable nylon covered to 0.063(1.6mm) O.D. 6. Adjustable cable stop and lower safety hook7. Matte black finish to minimize reflected light and reduce eye strain

Series EH Extra Heavy-duty Tapered Drum Tool Balancers keep tools within reach and reduce damage to tools by suspending them out of the way above the work surface. Risk of repetitive motion injury is reduced because only a light, downward force is required to place the tool in proper operating position. As the tool is lowered, and the spring is wound more tightly, the effective drum diameter increases to compensate for the increased force. Thus, when properly adjusted, the tapered drum keeps the tool at the positioned height.Features include: Rugged die cast aluminum housingBoth top and bottom hooks have spring-loaded safety latchesHeavy duty steel wire ropeAutomatic safety catch prevents free-spooling if springs fail (not available on EH-02EH-05)Easy adjustment with everyday tools from outside housing

Series A- Cast Aluminum Reel- CommercialIndustrial Applications Mount on Ceiling Wall or Under Bench Features include: Cast Aluminum Construction Slip Ring in Gasketed Enclosure Durable Baked Polyester Powder Painted Finish Unitized 20 Amp Slip Ring Easily Accessible Gasketed Junction Box Spool Configuration Prevents "Lock-out" Field Adjustable Cord Guide with Four Rollers Positive Locking Dog with Field Adjustable Disengage Feature Maintenance Free Enclosed Power Spring Field Adjustable Cord Stop Type SOW Cable Included On All Reels

The MX Lite Pump features the new Binks stainless steel MX412 pump with the Binks AA1600M Air Assisted Airless Spray Gun. Provides users with a low cost, robust industrial spray system which applies a wide range of industrial coatings an an optimum finish qualit level. Features include: The magnetic detent design (patented) creates a quick stroke changeover with no pulse or surge Stainless steel system- pump, gun and hoses Modular design for reduced maintenance and downtime Self adjusting spring loaded packings with large sight glass for visual packing inspection

Series EG Heavy-duty Reels feature rugged steel construction with black polyester baked finish, reinforced hanging bracket with forged clevis for ceiling mounting and extra holes for safety chain attachment. Spring is permanently lubricated and provides constant tension, adjustable for balancing tool in normal working zone (6 - 18 in. [152-457mm]). Cable is 920 lbs (414kg) test 0.09 (2.3mm) dia. 7 x 7 strand galvanized steel aircraft cable nylon covered to 0.12 (3.0mm) O.D. Includes safety tool clip and adjustable cable stop. LOCKING MODELS include all features listed above plus a positive ratchet lock mechanism to allow locking of the cable at a specific height. A slight pull on the cable releases the lock which functions like a window shade. Lock feature may be disengaged externally when constant tension is required.

Husky 1050 Air-Operated Double Diaphragm Pumps: 1 inch Positive Displacement Double Diaphragm Pump AODD pumps with 1 inch (25.4 mm) connection available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless steel and hastelloy. Our 1 inch (25.4 mm) Husky 1050 pneumatic double diaphragm pumps feature a stall-free, low pulsation air valve which provides a smooth and rapid changeover. Features include:30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040Up to 5x longer diaphragm life compared to other double diaphragm pumps in its classExpanded material offering to handle endless applications