Post Buy Requirement
PU
United States
Add Review

Our Products

CAC Hose - Charge-Air 367 Series Hot Side

4 ply silicone aramid reinforced configuration.
Convolutions increase flexibility in high vibration situations.
316 Stainless Steel restraining rings reduce swell and increase hoop strength.
Recommended for temperatures: -65 to 500F (-53.9C to 260C).
Fluorocarbon liner available for increased petrochemical combustion residue resistance.
Combines high performance and economy.
UV and ozone resistant.
View Complete Details

CAC Hose - Charge-Air 784 Series Cold Side

Designed and engineered to provide a connection between engine mounted charge air system components. Ideal for handling slight misalignments and isolating vibration between hose ends.
View Complete Details

7030 Series - 3 Ply

or heavy duty pressure connections in hostile engine environments. Ideal for extreme temperatures and various pressure ranges where high performance levels are required.3 ply silicone polyester reinforced configuration.
Resistant to electrochemical degradation.
Recommended for temperatures: -65 to 350F (-53.9C to +176.6C).
Meets and exceeds performance requirements of SAE J20RI, and physical and performance requirements of TMC RP 303B Class I and Class II.
Aramid-reinforced hose available for higher temperature applications.
View Complete Details

Heater Hose - 80 Series

For heavy duty pressure connections in hostile engine environments. Ideal for extreme temperature and various pressure ranges where high performanceSingle-braided polyester reinforcement.
Also available in heavy wall configurations for high pressure applications.
High burst strength and excellent heat resistance.
Recommended for temperatures: -65 to +350F (-53.9C to +176.6C).
Resistant to coolants, cold leaks, cracking, peeling, aging and ozone.
Aramid configuration available for temperatures up to 500F (260C).
Meets and exceeds all performance and physical characteristics of SAE J20 R3, Class A.
Available in 25', 50' and 100' cartons; other reel lengths available depending on hose diameter. Contact factory. levels are required.
View Complete Details

9046 Series Polyester Reinforced

4 ply silicone polyester reinforced configuration to provide strength and flexibility.
Silicone liner creates barrier to isolate medium.
Recommended for temperatures: -65 to +350F (-53.9C to +176.6C).
Custom ply configurations available to meet flexibility and burst requirements.
UV and ozone resistant.
Meets and exceeds all performance and physical characteristics of SAE J20 R1, SAE J20 R1 H.T. Class A, TMC RP303B Grade I and Grade II, Mil Spec A-A-52426 and various heavy-duty OEM requirements.
View Complete Details

3646 Series Aramid

Aramid reinforced 45 high temperature elbow, designed to meet modern4 ply silicone aramid reinforced configuration.
Economical for a wide variety of turbocharger applications.
Designed and engineered for a wide variety of high temperature turbocharger applications.
Resistant to minor oil splash and petrochemical exposure.
Recommended for temperatures: -65 to 500F (-53.9C to 260C).
Excellent flexibility.
UV and ozone resistant.
Fluorocarbon liner available for increased petrochemical combustion residue resistance.
Heat shield available.
Custom ply configurations available to meet flexibility and burst requirements. elevated engine compartment temperatures
View Complete Details

3641 Aramid Hot Side

Designed and engineered for a wide variety of high temperature turbocharger applications.Aramid reinforced configuration for fatigue resistance at high temperatures.
Recommended for temperatures: -65 to 500F (-53.9C to 260C).
Fluorocarbon liner available for increased petrochemical combustion residue resistance.
Designed and engineered for a wide variety of high temperature turbocharger applications.
Silicone is resistant to extreme temperature conditions.
Resistant to minor oil splash and petrochemical exposure.
Compensates for misalignment and offsets vibration.
UV and ozone resistant.
View Complete Details

EPDM Inserts

EPDM Inserts
Designed to meet unique transition requirements in air intake systems.
Specifically formulated EPDM compound.
Available in nitrile and chloroprene and silicone compounds.
Vacuum collapse rating exceeds 4" Hg. mercury.
Recommended for temperatures: -60F to +300F duty.
Complies with physical properties requirements of ASTM D2000 3BA715A14B13C12F17.
70 5 Shore A Hardness
1500 PSI Tensile, minimum.
250% Elongation, minimum.
Air Age, 70 Hrs. at 100 C.
Durometer Change, +10, maximum.
Tensile Change, -25%, maximum.
Elongation Change, -25%, maximum.
Comp. Set, Method B, at 70 C. 25% maximum.
View Complete Details

EPDM Straight Sleeve

Specifically formulated EPDM compound.
Available in nitrile and chloroprene and silicone compounds.
Vacuum collapse rating exceeds 4" Hg. mercury.
Recommended for temperatures: -60F to +300F duty.
Complies with physical properties requirements of ASTM D2000 3BA715A14B13C12F17.
70 5 Shore A Hardness
1500 PSI Tensile, minimum.
250% Elongation, minimum.
Air Age, 70 Hrs. at 100 C.
Durometer Change, +10, maximum.
Tensile Change, -25%, maximum.
Elongation Change, -25%, maximum.
Comp. Set, Method B, at 70 C. 25% maximum.
Ozone Resistance, D1171, Method B, Quality Retention Rating: 100%
Low Temp. Brittleness, D2137, Method A. Non Brittle After 3 Minutes at -40 C.
View Complete Details

45Silicone Hose

Designed for a flexible fit in wet exhaust marine applications. SAE J2006 cHigh performance.
Meets and exceeds SAE J2006 industry standards.
High-quality polyester reinforced.
recommended for temperatures: -65F to 350F (-53.9C to 176.6C).
Available in large bore up to 10 inch diameter.ompliant for reliability and safety.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Purosil)
  • Corona, CA 92879 map, United States
  • Share us via