Products / Services #5216792

In Military environments foam cushioning must withstand repeated abuse and still be able to perform. We have designed and fabricated a large number of the foam cushions and foam dunnage in use by the Military today and we are often called upon by the Military to provide fail-safe custom designs. Our engineers have worked hand in hand with Naval Weapons Station Earle, Tacom, Picatinney Arsenal, and all the major prime contractors in designing and building specialized foam packaging, foam dunnage, Military cases and containers. We are a Dow Chemical authorized fabricatordistributor and stock all grades of the Military series polyethylene that meets the A-A-59135, A-A-59136, and PPP-C-1752 specifications as well as all grades and densities of MIL-P-26514 polyurethane.

With over 25 years of innovative design and development our sister company, Quality Case, has earned a reputation as one of the leading manufacturers of thermo-formed cases. These cases are designed to ensure that your instruments and equipment arrived undamaged and ready to perform.

We can thermoform all types of cross-linked polyethylene foams. Our thermoforming capabilities vary from simple tray liners to very complex designs.

We can route all polyethylene and closed cell foams including E.P.S. This process uses a high speed router that follows AutoCAD drawings to produce complex foam cavities.

Hot-Wire Cutting

We can hot-wire almost all types of foam. This process uses custom bent hot wires to produce a wide variety of complex cavities.

We can water jet cut all types of foam materials. This process uses pressurized water working @55, 000 PSI to cut through the foam. It follows a computer generated pattern and can produce complex shapes and cavities very quickly and efficiently.

We can die-cut almost all foams. This process uses custom shaped steel rules that are stamped through the foam.

Our profiler has a 82" X 96" table, and utilizes hot wires to produce repeated complex shapes throughout a bun of material. The profiler works with all foams.Our automatic slitter converts large volumes of material into sheets as thin as 116TH of an inch.

Expanded Polystyrene foam offers a broad range of physical properties to allow packaging designers to meet the challenges of protection and distribution. These properties, in combination with appropriate engineering design considerations, provide the design flexibility required to create truly cost effective protective packaging

This is an economical packaging foam that is available in densities ranging from 1# to 3# and is easily formed by cutting, hot wiring, molding and routing.

This foam is a nitrogen- charged cross linked polyethylene foam that has increased tear strength while being lightweight. This foam is available in almost any color. This foam is an excellent choice for case inserts and tool kits as it is impervious to most chemicals. Available in a wide range of densities and is also available in anti-static, conductive and fire retardant formulations.

This is an open cell flexible polyurethane foam ranging in density from 1.5# density to 6# density. It is available in anti-static and fire retardant formulations, and meets the MIL-P-26514 and UL-94 specifications.

Polyurethane foam is an open cell flexible foam ranging in density from 1.5# density to 8# density. It is available in anti-static and fire retardant formulations, and can be formulated meet the MIL-PRF-26514, Cal-117, MVSS302, UL-94, and the FAR 25.853(a) Description
Cal-117 (2) To Meet Requirements of the State of California
MVSS302 (3) To Meet Requirements of Automotive Specifications
FHSAER (4) For Toys
UL Listed (5)
Foams in both Ethers and Esters (UL94HF1 & HBF)

The flammability test(s) described in are small scale test procedure(s) performed under controlled laboratory and isare not intended herein to reflect the hazards presented by this or any other material under actual fire conditions.

This is closed cell polyethylene foam has been chemically cross linked. It combines a smooth aesthetic feel with superior physical and chemical properties than standard polyethylene foam. This foam is available in a wide range of densities and is available in over 40 different colors. It is available in anti-static, conductive, and fire retardant formulations.

his is a low cost, high resilient open cell flexible foam available in densities ranging from 1# to 1.8#. Also available in anti-static formulations.

Polyurethane foam is an open cell flexible foam ranging in density from 1.5# density to 8# density. It is available in anti-static and fire retardant formulations, and can be formulated meet the MIL-PRF-26514, Cal-117, MVSS302, UL-94, and the FAR 25.853(a) specifications.

Standard Description
Cal-117 Meets requirements of the State of California
MVSS302 Meet requirements of automotive specifications
FHSAER For toys
UL Listed Foams in both Ethers and Esters (UL94HF1 & HBF)
FAR 25.853(a) Meets requirements of the Federal Aviation Regulations
MIL-P-26514 Meets US Military specifications

ETHAFOAM Brand Anti-Static Polyethylene Foam resolves multiple problems. It is a high performance cushioning foam; It also provides anti-static properties important to sensitive electronic parts and products.

Our anti-static foam provides controlled, dissipation of electro-static charges emitted from other neighboring materials and personnel during handling, assembly and shipment of the product. Our anti-static feature outperforms competitive products, in providing long term RELIABILITY of anti-static performance and physical product protection.

This is an open cell low cost polyurethane foam that has the look and feel of polyester foam. Available in 1.6# and 1.85# densities.

Polyurethane foam is an open cell flexible foam ranging in density from 1.5# density to 8# density. It is available in anti-static and fire retardant formulations, and can be formulated meet the MIL-PRF-26514, Cal-117, MVSS302, UL-94, and the FAR 25.853(a) specifications.

Standard Description
Cal-117 (2) To Meet Requirements of the State of California
MVSS302 (3) To Meet Requirements of Automotive Specifications
FHSAER (4) For Toys
UL Listed (5)
Foams in both Ethers and Esters (UL94HF1 & HBF)

The flammability test(s) described in are small scale test procedure(s) performed under controlled laboratory and isare not intended herein to reflect the hazards presented by this or any other material under actual fire conditions.