Post Buy Requirement
RA
United States
Add Review

Our Products

Garnet Sand,garnet Sand

  • Color red to pink
  • Fracture subconchoidal, usually brittle
  • Bulk Density (lbs./ft3) 150.
  • Melting Point (°C) 1250 to 1315
A group of iron aluminum silicate homogeneous minerals having similar properties. non-hygroscopic, sharp angular shape, inert, slightly magnetic, not soluble in water, translucent, friable to tough, and contains no free chemicals. All oxides and dioxides are combined chemically as follows: Fe2O3Al2(SiO4)3. The iron and aluminum are partially replaceable by calcium, magnesium and manganese.There are three types- aluminum garnet, iron garnet & chromium garnet.
View Complete Details

Ceramic Beads

  • Packaging Bags, drums, and bulk bags
Round ceramic particles for polishing, grinding and surface treatments

ceramic beads, ceramic powders, polishing beads, lapping beads, grinding, dispersion, surface treatment, sintered spheres
View Complete Details

Coal Slag

  • Specific Gravity (g/cm3) 2.7
  • Bulk Density (g/cm3) 75-1-- lbs. per cu. ft.
A black boiler slag abrasive with the following advantages: low moisture content, high degree of etch for permanent bonding of coatings, readily used in standard equipment in commerce, inert, fast cutting due to sharp angular edges, hardness, more economical, longer lasting and leaves minimum dust
View Complete Details

Emery Abrasive Grain

  • Color black or dark gray
  • Apparent Density (g/cm3) 3.7 to 4.3
  • Mohs Hardness 8-9
A natural occurring odorless mineral having its broadest use as an abrasive in polishing applications. An intimate mix of corundum and magnetite. The higher amounts of impurities and weaker internal structure than naturally occurring minerals has restricted its growth in new applications.
View Complete Details

Dental Aluminum Oxide Powder

  • Color White
  • Molecular Weight (g/mol.) 40.98828
  • Knoop 100 Hardness 2150
An extra friable, high purity, medium density, fused aluminum oxide dental air micro abrasive.

Chemical Name: Aluminum oxide

Chemical Formula: Al2O3
View Complete Details

Glass Abrasive Powder

  • Packaging Multiply bags
  • Weight 50 lbs. net
Recycled glass powder is waste glass turned into usable products. Glass waste is separated by chemical composition, and then, depending on the end use and local processing capabilities, might also have to be separated into different colors.
View Complete Details

Cobalt Powder

  • Durometer Shore A 58
  • Durometer Shore D 48
  • ASTM D-394 Method B 25
Abrasives are substances both natural and synthetic that are used to grind, polish, abrade, scour, clean, or otherwise remove solid material usually by rubbing action (as in a grinding wheel), but also by impact (pressure blasting). The most important physical properties of materials that qualify as abrasives are hardness, toughness (or rigidity), grain shape and size, character of fracture (or cleavage), and purity (or uniformity). In the final analysis, the choice of a high-grade abrasive depends upon the quality and quantity of work performed by the abrasive per unit of cost. Initial cost of an artificial abrasive may be much greater than that of a natural abrasive, but the artificial mineral may do so much better work and do it so much faster that the ultimate cost is less. It is for this reason that artificial abrasives have largely replaced natural abrasives.
View Complete Details

Tripoli Powder

  • Bulk Density (lbs./ft3) 55
  • Specific Gravity ~2.15- 62
  • Melting Point (°C) 1640- 1707
A free-flowing non-metallic powder, odorless, cream and rose colored, and insoluble in water. Cream Tripoli is a softer material than Rose Tripoli.
View Complete Details

Specular Hematite

  • Color Bright solid grey / black particles
  • Nominal Granulation -12 / +40 mesh
  • Bulk Density (g/cm3) 183 lbs./ ft3
  • Melting Point (°C) >1, 500
Specular hematite is a chemically inert ferric oxide mineral which cannot rust as the particles are in a fully oxidized form. The BARSHOT grade offered contains less than 0.3% free silica.
View Complete Details

Pumice Powder

  • Bulk Density (g/cm3) very low
  • Mohs Hardness @20°C 5.5
  • Specific Gravity (g/cc) 2.35
  • Particle Shape Irregular
Pumice is a very light colored, frothy volcanic rock that is formed from lava that is full of gas. During an eruption the lava is ejected and shot through the air . As the lava hurtles through the air it cools and the gases escape leaving the rock full of holes. This makes the rock very light, so light it can float on water.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Nicole Carpenter (Reade Advanced Materials)
  • 1680 Omalley, United States
  • Share us via