Post Buy Requirement
RC
United States
Add Review

Our Products

  1. Conveyor Components 3 Products available
  2. Zippers 15 Products available
  3. Gearbox & Gear Parts 8 Products available
  4. Conveyors 5 Products available
  5. Others 39 Products available

Other Products / Services

Replacement Drives

Replacement Drives
Renold produces replacement drives and gearing for old and obsolete designs. Our design capabilities enable re-engineering from sample parts or drawings.
View Complete Details

Renold SmartGearbox

The Renold SmartGearbox incorporates a range of condition monitoring technologies designed to enhance reliability and performance.
The technologies available include:
Oil condition monitoring system (OCMS)
Vibration sensors
Temperature sensors
Dynamic and static oil sensors
Brake wear sensors
Continuously monitoring the condition of your gearbox allows for early detection of any potential issues, enabling corrective action to be taken.
Benefits can include: minimising downtime, increasing production and reducing maintenance costs.
View Complete Details

Tackling Corrosion

Tackling Corrosion
Due to constant exposure to water, corrosion is often an issue on water ride chains. To address this, Renold has developed a dual process surface treatment to increase corrosion resistance. The zinc based specialised coating offers superior protection of the steel. Even when the coating is penetrated, the treatment continues to offer superior corrosion resistance.
View Complete Details

Reducing Wear

wear resistanceReducing Wear
Development of a heavy wall bush design overcomes premature wear and failure of the bush, and in most cases a shell roller can also be incorporated which reduces wear on sprocket teeth; increasing life of both the sprocket and chain and reducing maintenance time and cost.

Additional Benefits
Integral attachment design eliminates attachmentplate corrosion issues
Smoother and quieter operation than standard water ride chain
Operates on the same sprockets and track as standard chain.
Superior breaking load and working load

*in salt spray tests
NOTE: Polymer sleeve highlighted in yellow for illustration purposes only
For more information on Renold Trident and how it can reduce costs for your theme park rides, call us today on + 1 (514) 367-1764 or fill in our request info form for more information.
View Complete Details

Eliminating Seizure

Eliminating SeizureLubrication Free
Transfer and lift chain on rides can suffer from seizure of the bush and pin and significantly shorten the life of the chain. Through the development of a unique polymer sleeve, metal-to-metal contact is reduced, thereby eliminating the risk of the bush and pin seizure. This also provides lubrication-free operation and removes the need for any lubrication ports.
View Complete Details

Chain Pin Extractor

Chain Pin Extractor

The Chain Pin Extractor from Renold is a quick and easy way to cut chain.
Cutting a wedge riveted chain means having to grind off the pin head and then hammer the pin through the plates. That's too much time and effort.
Renold Brand and Renold Synergy transmission chain have an end-softened pin with a spin, or round, rivet.
You can cut the chain by hand in moments, with no mess.
Renold makes it easy!
Order your Chain Pin Extractor today!
View Complete Details

SmartProducts

SmartProducts
Renold SmartProducts are a unique suite of diagnostic tools designed to deliver maximum performance.
SmartProducts give you the ability to know more than ever before about what is happening to your chain. This technology, developed by Renold, is helping engineers all over the world get the maximum performance out of our products.

Renold SMARTLINK
SmartLink, a member of the SmartProducts family, is a low profile battery operated data logger that resides on the side of the chain and travels with the chain round the chain drive system. Its primary function is to collect load data from the drive to provide you with a load profile of the drive. SmartLink works by monitoring the load of the chain in real time and transmitting data to your Android or Windows Smartphone via Bluetooth BLE or by retaining the data to be later downloaded and evaluated by experienced Renold engineers.
The innovative technology can Smarklink Chain d (1)be used as part of your regular maintenance routine, after wash downs or following new chain installations to ensure the chain is installed and operating correctly. As a diagnostic tool, SmartLink aids in the identification of the potential failures of other components in the drive including stiff bearings, misalignment issues and over tension. By understanding the load as the chain travels round the sprockets, other potential issues can be identified before a critical event occurs.
SmartLink can be applied to a wide variety of chains from a 1" pitch roller chain to industrial chain including conveyor applications. Whilst there is a range of standard sizes, SmartLink can also be adapted by our engineers to suit the environmental factors of your application. Thermal and waterproof enclosures are just a few of the adaptions that can be engineered to ensure safety and optimum function in specialised situations.
SmartLink is now available for your engineers own use or as a service provided by us. The technology can be used independently of Renold to assess load and chain function via your Smartphone. For more complex requirements, Renold offers an unparalleled service in which our engineers will visit your site anywhere in the world, guide you with the installation of the SmartLink and then carry out testing for you. This is followed up with a report of the findings and product recommendations can be made where appropriate to do so. We find this service is particularly interesting for bespoke chain designs, inventory management to standardise your purchasing requirements and to optimise your processes to get the maximum life out of your chain.
Different industries all over the world have already benefited from our SmartLink consultancy service that have provided a better understanding of loads in their system. We have been able to provide information that helps companies take preventative maintenance measures to prolong chain life. Furthermore, improvements to drive layout, optimum chain selection and increased production efficiency have all been made possible as a result of Smartlink technology.
View Complete Details

Studbush

Knuckle & Studbush

Steel knuckle chains are made from top-grade carbon and alloy steels. These chains are specifically designed for rugged and heavy duty applications, such as bucket elevators and apron conveyors. Renold manufactures the most comprehensive selection of steel knuckle chains and attachments tailored to a variety of applications.
View Complete Details

Leaf Chain

Our range of leaf chain for materials handling applications is used worldwide for straddle carriers, forklift trucks and on major civil engineering works such as flood defence barriers.
We are behind some of the biggest names in the industry thanks to the quality of our products.
View Complete Details

Drive Chain

Drive Chain

Renold Drive Chains are constructed with a variety of metals and heat treatments to suit the most demanding drive and operating requirements.
Renold manufactures the most diverse selection of drive chains for construction, drum drive, elevating and other heavy duty applications.
View Complete Details

Bucket Elevator Chain

Bucket Elevator Chain
Renold bucket elevator chains for the cement industry are designed to withstand shock loadings to keep your production up and running. Our sideplates are furnished as a through-hardened component, while the pins are both through-hardened and induction hardened for maximum performance. Renold also uses a full round design on both knuckles (bushings) and pins.
Sealed joint chains and special coatings on chain components are used for chains designed for harsh conditions. We also produce apron conveyors, hard face drag chains, super capacity elevator chains and other commonly found chains in the cement industry.
Renold boasts the greatest engineering and design staff in the industry, with over 110 years of experience. Our technical and trouble shooting capabilities are second to none.
View Complete Details

Renold Control Over Pin

  • Sizes range 4 mm to 4 inch pitch
Renolds unique control over pin bush contact makes sure that wear life exceeds other brands. Little initial chain adjustment is therefore required.
Renold roller chain is highly fatigue resistant, giving up to four times the life of other leading competitor chains. Breaking loads exceed the minimum requirements of international standards.
View Complete Details

QE Vibrators

  • Range 70-72 DbA.
QE Vibrators
Quadra Eccentric Vibrators
The Ajax Quadra Eccentric Vibrator was designed for noise sensitive applications in food processing. Units operate in a range of 70-72 DbA.
Special features include:
Plated Shafts For Corrosion Protection
Polyamide 12 Driven Gear
Changeable Eccentric Weights
The Gear Set Does Not Require Lubrication. Meaning No Leaks
View Complete Details

Vibratory Fill Stations

Vibratory Fill Stations
Vibratory Tables Packers: Automated Vibrating Weigh System
Renold's custom engineered Vibratory Tables Packers provide more materials in less space; while weighing, vibrating and filling simultaneously.
Each unit is designed to insure the proper vibration, thus eliminating voids to increase the density of materials in Bags, Boxes, Drums, and Totes being packaged. Increases in density from 20% to 50% is achieved in minimal cycle time.
Ancillary equipment such as in-line roller conveyors, pallet dispensers, slip sheet dispensers etc, including various PLC interfacing compliment the Station to make up the Turnkey System necessary to meet any specification.
View Complete Details

Dual Lead Adjustment

  • Size 67 - 500mm
Dual Lead Adjustment

'Ren-Adjust' Dual Lead Adjustment Mechanism
Renold Gears has launched a new, high precision adjustment mechanism, Ren-Adjust, for dual lead gear sets used on positional machinery requiring a high degree of accuracy, such as rotary tables and machine tools.
The new system for precisely adjusting backlash is quick and simple to operate, by comparison to alternative systems, reducing down time whenever an adjustment needs to be made.
Drop-in Replacement
The new Ren-Adjust has been designed as a simple replacement on existing machinery and can also be specified by machine tool and rotary table manufacturers as a like-for-like component, in many cases with no need to modify existing designs.
Renold's system can therefore replace that of most other manufacturers without any redesign or modifications. This makes it easy for OEMs to switch to the Renold product and equally simple for machine operators to replace their existing equipment.
Simple Adjustment
Ren-Adjust permits precise adjustment without the need to remove the wormshaft or drain oil. It is quick and easy to use and cuts adjustment time to a minimum.
The backlash is adjusted by simply removing the shrink disc, which will allow the worm shaft to move independently from the adjustment sleeve, and by turning the captive screw, which will axially move the dual lead worm shaft and adjust the working backlash. Once the backlash is acceptable, the shrink disc is re-applied.
The size range of the Ren-Adjust mechanism covers centre distances from 67 - 500mm.
View Complete Details

Geared Motor Units

  • Series R Series
R Series
In-line helical gear unit with torque capacities up to 20, 000Nm, power up to 160kW and ratios up to 58:1 in two stage and up to 16, 200:1 in combined form.
Can be supplied as double, triple, quadruple and quintruple reduction units, foot or flange mounted. Available as motorised, motor ready or as a reducer with a keyed input shaft.

Reduction gear and geared motor options
Power up to 160kW covering the majority of drive requirements
Ratios: up to 58:1 in two stage, up to 16, 200:1 in combined form offers wide speed range
Output torque up to 20, 000Nm providing low cost per Nm
Interchangeable Euro dimensions for ease of replacement
Accepts standard IECNEMA motors ensuring fast and low cost replacement
Oil tight gear head keeps motor replacement free from oil spills
Cast iron case with epoxy-polyester powder-coated finish for strength and durability
View Complete Details

Carter Gear Hydraulic

  • Capacity 30kW
  • Range 27:1
Carter Gear Hydraulic
The Carter Hydrostatic Variable Speed unit has an infinitely variable speed range of 27:1 and a power capacity of up to 30kW.

Features & Benefits
Totally enclosed drive unit suitable for use in all hostile environments.
Electronic, Pneumatic or Manual speed controls for all design demands.
Accurate speed holding under varying load conditions allowing suitability for all drive applications.
High starting torque for use on all heavy duty machinery.
Overload protection available for machinery safety.
Dynamic breaking as standard.
Suitable for use in explosion proof areas.
View Complete Details

Oil Condition Monitoring System

  • Series OCMS
The Renold SmartGearbox Oil Condition Monitoring System (OCMS) delivers an easy to use and effective way to display the real time condition of your oil. It can be used stand alone or simply connected to a variety of control and display systems.
The Renold OCMS increases reliability and performance by continuously monitoring the condition of the oil and reports on any early signs of problems, enabling immediate corrective action to be taken.
As over 75% of all drive system failures are attributed to oil contamination, the new OCMS has been designed to cut downtime, increase production and reduce maintenance.
60 times more sensitive to oil contamination
Optimise service levels by accurately predicting future maintenance
Increased reliability through continuously monitoring and reporting early signs of issues
Lower operating costs through less downtime and maintenance
Equipment in optimum condition gives a safer working environment
The Renold OCMS has undertaken rigorous independant testing and is fully certified to international standards.
View Complete Details

Sprag Cages

  • Series REGP
Sprag Cages
The REGP series is a cage comprising of sprag elements running as a freewheel on races primarily measured in inches.
This design offers high torque transmission within compact dimensions. In turn this enables cost effective technical solutions.
View Complete Details

Roll-Ring Chain Tensioner

Roll-Ring Chain Tensioner

ROLL-RING is a simple yet innovative chain tensioner made from a specially formulated polymer. The unique design is based upon a simple toothed ring that can be fitted to horizontal, vertical or diagonal drives in a matter of seconds, simply by placing it in-between the two strands of chain, it is also is self-adjusting and maintenance free.
When the drive is in use, the ROLL-RING deforms to an elliptical shape, due to compression between the strands and completely absorbs any slack in the system. ROLL-RING performs the job of a tensioner and a damper in one, and is ideally suited to applications where maintenance is difficult or impossible.
Roll-Ring Chain Tensioner

ROLL-RING is a simple yet innovative chain tensioner made from a specially formulated polymer. The unique design is based upon a simple toothed ring that can be fitted to horizontal, vertical or diagonal drives in a matter of seconds, simply by placing it in-between the two strands of chain, it is also is self-adjusting and maintenance free.
When the drive is in use, the ROLL-RING deforms to an elliptical shape, due to compression between the strands and completely absorbs any slack in the system. ROLL-RING performs the job of a tensioner and a damper in one, and is ideally suited to applications where maintenance is difficult or impossible.
ROLL-RING chain tensioners provide tensioning using:
Static tensioning force from the elastic ring
Dynamic tensioning force from the damping of the working material
ROLL-RING provides as much tensioning as possible at low chain speeds, and has reserves of tensioning and damping capability for higher chain speeds. The diagram below shows the tensioning force of a ROLL-RING chain tensioner with its individual allocations of tensioning forces and their resulting effects.
View Complete Details

Shakers

  • Size 26 Sizes
  • Range 115 to 11, 000 lb,
Shakers
Vibratory Shaker Drives
For Use on Conveyors, Feeders, Screeners, Packing Tables and Other Vibratory Equipment
Continuous Operation
Long Life Dependency
Low Maintenance Schedule
Totally Enclosed Gear Driven Eccentrics
26 Sizes
Throughout the world, Renold's Ajax Shaker Drives are recognised as energy efficient units, adaptable to countless new and unusual application possibilities.
Standard applications include:
Open and Enclosed Pan Conveyors
Screeners
Feeders
Packaging Tables
De-watering unit
Tampers
Electronic Test Tables
Cable Laying Plows
Six basic sizes are offered, each having a variety of eccentric weight selections. The force output range is from 115 to 11, 000 lb, operating at low frequencies.
View Complete Details

Rotary Electric Vibrators

  • Series R/KBM and R/KBC
Rotary Electric Vibrators
The Renold Ajax RKBM and RKBC series is the most economical motor vibrator drive available in the North American market today.
No other electric vibrator motor delivers more value and quality per pound of force output. Our full line consists of models operating at frequencies of 900, 1200, 1800 and 3600 RPM.
Eccentric weights can be manually adjusted to vary the centrifugal force from 0 through 100%. A suitable model can be supplied for most any type application or environment, and are rated for continuous operation.
Special Features Include:
Foot Mounting
Cast Metal Housing
O-Ring Groove Sealed Covers. Stainless Steel Covers available upon request
Increased Corrosion Protection
External Ground Lug
CE Certification
View Complete Details

Vibratory Feeders

  • RATES 1, 000
Vibratory Feeders
Brute Force and Two Mass Vibratory Feeders
Renold's vibratory feeders meter bulk materials into the process at rates of 1, 000 pounds per hour through 1, 600 tons per hour.
Our feeders are custom built to meet any application need. Feeders are built rugged to produce the consistent flow rates and trouble free operation needed for efficient processing.
UL listed explosion proof motors are available capable of interfacing with variable frequency drives to carry the feed rate.
View Complete Details

Bulk Bag Unloaders

Bulk Bag Unloaders
Renold offers a variety of bag unloading stations custom built to fit each specific application. The standard model offers discharge of materials through an iris valve directly into a storage hopper. Flow aids are optional.
From the hopper, the material can then be directed into another process by means of a screw auger conveyor, feeder or rotary airlock for pneumatic conveying.
Enhancements such as welded tubular frame construction, lift hoist and load cell batch are available including operator controls with PLC interfacing.
View Complete Details

Rail Technology Solutions

  • Temperature -50 degrees C to +200 deg C.
As the global demand for efficient public transportation continues to increase, Renold has demonstrated its extensive knowledge in the design and manufacture of gearboxes and couplings for use by the leading manufacturers of locomotives, mass transit rail vehicles and maintenance operators.
Renold offers several rail traction product options, from traction gearbox packages to gear couplings. Rail _gear
Renold has been producing Rail Technology Couplings for subway rail cars for more than 35 years and has produced more than 20, 000 units for use in many cities in the US, Singapore, Malaysia, Brazil and Korea. Rail Couplings
Renold produce high quality, high specification Rail Components. Rail Helical
The Renold Hi-Tec HTB coupling is designed to work in extreme temperatures from -50 degrees C to +200 deg C.
View Complete Details

REFURBISHMENT

Refurbishment & Service
Renold Gears offers a complete industrial gearbox refurbishment service direct from its advanced manufacturing facility in the UK.
Our refurbishment expertise is based on over 130 years of gearbox design and manufacture, supported by our dedicated Service Team who will ensure a fast and personal service.
We undertake repairs of all makes and types of industrial gearboxes and can reverse engineer any non Renold components. All gearboxes are returned in an 'as new' condition with a full 12 months warranty.
We also offer a Rapid Response service to ensure minimum customer disruption and downtime.
View Complete Details

Sprag Clutches

  • Series SA Series
SA Series
Features
Suitable for all small machine applications where compact dimensions are required
Grease lubricated and sealed for life, offering reliability with maintenance-free duty
Dimensional interchangeability with other leading manufacturers of clutches
All SA Series clutches are optionally left or right hand
Applications
Light duty fans and blowers
Printing Machinery
Textiles
Instrumentation
Light duty pumps
Light duty general industrial applications
View Complete Details

Trapped Roller Clutches

  • Series REUS
REUS
Renold REUS Series Trapped Roller Freewheels are non self-centering. Bearings must be placed adjacent to the freewheel to ensure concentricity between inner and outer races.
The REUS Series freewheels have the same outside dimensions as standard 62 series bearings.
Torque is transmitted to the inner race via a key and the outer race by means of an interference fit. If the face keys in the outer race are used for torque transmission the housing tolerance should be H7 to provide a press fit. The housing must be strong enough to accept the stresses from the interference. Shaft tolerances must be h6j6.
Prior to use, the freewheel must be lubricated. Oil lubrication is essential for over running applications.
The REUS is an open design so sealing must be provided by the installation.
View Complete Details

Ball Bearing Clutches

  • Series REUK
Ball Bearing Clutches
The REUK Series is a Freewheel incorporating a 62 Series bearing.
The self-centering freewheels are already grease-lubricated and come with dust-proof protection.
For the REUK model, the transmission occurs by mounting the inner race onto a shaft with an n6 tolerance. The outer race is fitted into a housing with an N6 tolerance.

The REUKC model is equipped with a keyway on the inner race and should be fitted on k6 tolerance shafts. The outer race is fitted into a housing with an N6 tolerance.

The REUKCC model is equipped with a keyway on the inner and outer race. The inner race is fitted onto a shaft with an n6 tolerance. The outer race is fitted into a housing with an H6 tolerance.

The REUK2RS model is equipped with waterproof seals.

The REUK Series is built with a C5 clearance that turns into a normal clearance after keying.
The races can be glued to the shaft and the seat. In this case, the clearance remains C5.
For more information and advice on the selection of ball bearing freewheels, contact Renold today on 1-800-265-7790.
View Complete Details

Heavy Duty Drag Chain

Heavy Duty Drag Chain

Heavy Duty Steel Drag chains are designed for severely abrasive and extremely high-temp applications.
For example, hot clinker and hot lime drag conveyors that run up to 1000F degrees. To provide greater fatigue life this series of chain is made with special heat treated and induction hardened pins. To provide a greater sliding resistance, both sides of the chain have a bead of hard face weld.
View Complete Details

Peripheral Drives

Peripheral Drives
Renold supplies options for peripherally driven air preheaters. A peripheral drive is mounted onto the extremity of the APH. It is supplied with a solid output shaft onto which a spur gear is mounted, which drives the APH via an externally mounted girth ring gear.
View Complete Details

Compact Drives

  • Series WH Series
Compact Drives
The new WH Series escalator drives combine the benefits of worm and helical gearing in a compact design offering high efficiency, low noise and minimal maintenance.
View Complete Details

Double Drives

Double Drives
Renold has developed a number of solutions ideal for in truss arrangements which can be configured as double drives.
View Complete Details

Traditional Drives

Traditional Drives

Renold supplies traditonal base plate arrangements designed for London Underground, Washington Metro and New York Subway.
View Complete Details

Central Drives

Central Drives
Renold designs options for centrally driven Air Preheaters, including worm and helical gearing configurations, which can be designed as drop-in replacements for originally supplied units, or designed to the OEM's specification for new applications. A central design has a solid output shaft and mounts directly on to the main rotor shaft of the APH, secured by means of a shrink disc.
View Complete Details

Stainless Steel Chain

Renold Stainless Steel chain is made from high grade materials. These perform extremely well in environments that are acidic, alkaline, where direct contact with food is a consideration, where the chain will be exposed to water, and for very high or very low temperature locations ( -40 to +400C ) where resistance to corrosion is a requirement.
View Complete Details

Zinc Plated Chain

This is a new zinc plating from Renold. Ideal for applications susceptible to light corrosion, the new plating has one consistent appearance, replacing the yellow and blue chromated versions previously available and delivering the same high levels of corrosion resistance.
View Complete Details

Nickel Plated Chain

Renold Nickel Plated transmission chain delivers excellent corrosion protection. Ideal for applications such as bottling where spillages can lead to corrosion the specification for this chain is designed to optimise its performance. Every modification is made to push the wear and fatigue resistance to the maximum as well as delivering corrosion resistance.
View Complete Details

Direct Drives

Direct Drives
Slim line unit directly mounted on to the headshaft, eliminating lubrication and risk of contamination.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Renold Canada)
  • Brantford, ON N3T5N4 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/renold-canada/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0008457920{main}( ).../index.php:0
20.17832114264include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.24892836928include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.26783772616header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice