Post Buy Requirement
RC
United States
Add Review

Our Products

  1. Sheet Metal Electrical Enclosure 6 Products available
  2. Cables And Wire Accessories 3 Products available
  3. Adaptors, Plugs And Sockets 5 Products available
  4. Others 50 Products available

Other Products / Services

Consoles For 3-Part Assembly

  • Model Number TP 6720.50
  • Height 700 mm (28 ˝)
  • Width 600 mm (24 ˝)
  • Depth 240 mm (9.4 ˝)
Four widths offer the ideal conditions for individual monitoring and a three-piece configuration of the TopConsole system.
View Complete Details

Wall-mounted Enclosures EL Mounting Angles

  • Model No. DK 7709.735
  • Height 9 U (9 U)
  • Installation depth 520 mm (20 ˝)
Wall-mounted housing 3-part, pre-configured with: Solid flange plate, top, with brush strip at the bottom, mounting rails, C rails, outlet filter, ground rail, wall-mounting bracket
View Complete Details

Comfort Panel

  • Model Number CP 6372.541
  • Height 400 mm (16 ˝)
  • Width 520 mm (20 ˝)
  • depth 74 mm (2.9 ˝)
Aluminum housing, high thermal conductivity for optimum passive heat dissipation. Low weight coupled with high stability. Protection category IP 65 to IEC 60 529.
View Complete Details

Operating Housing Desktop TFT

  • Model Number CP 6321.000
  • Height 450 mm (18 ˝)
  • Width 650 mm (26 ˝)
  • Depth 155 mm (6.1 ˝)
Integrated VESA 75100 mount. Effective and attractive protection for commercially available desktop TFTs up to 24" in 16:916:10 formats. High protection category of IP 65.
View Complete Details

HD Leveling Feet

  • Model Number HD 4000.240
HD leveling feet to minimize cleaning time thanks to fully covered, permanently sealed thread. Also compensates for floor inclines of up to 10 thanks to the flexible base plate. Design to EHEDG standards.
View Complete Details

HD Connection Components

  • Model Number HD 4000.066
The HD connection components provide a hygiene-compliant solution for connecting two housings with integrated cable management.
View Complete Details

RiMatrix S Standard Security Room

  • Model No DK 7998.607
The standardized data center at your premises is equipped with an additional security room feature (room-within-a-room) to provide additional protection from fire, water and smoke.
View Complete Details

Aisle Containment

  • Model No SK 7999.922
Door and roof components separate hot and cold air in the data center. Increases the efficiency of the climate control systems. Can be used as a hot or cold aisle partition
View Complete Details

LCP Rack Units

  • Model No. SK 3311.238
  • output 10/20/30 kW
  • Voltage 208 V
For the highest density installations, these LCP Rack units totally control the air path for efficient cooling. The LCP Rack CW is a closed loop system and units are scalable from as low as 10kW to as high as 60kW with all the most requested stops in between. These new, more powerful units in the line maintain the 12-inch wide footprint making it possible, in some situations, to double the cooling capacity without taking up additional floor space.The units high-efficiency fans have been moved to the front of the LCP on the cool side away from maximum heat which will extend the life of the fans. Water connections are available at either the top or bottom of the unit.
View Complete Details

Roof-Mounted Fans

  • Voltage 115 V, 1~, 50 Hz/60 Hz
  • Model No. SK 3164.115
  • Air throughput 1500 m³/h (882.9 cfm)
Roof-mounted fan for the office sector with minimal noise level (40 dB) and high volumetric flow (unimpeded air flow 1500 m3h).
View Complete Details

Twin Castors

  • Model Number CP 6148.000
  • Load per component 75 kg (165.3 lb.)
M12 x 20 fastening screw thread. For: TS 8 baying system, SE 8 free-standing enclosure system, PC enclosure system, pedestal base plate, 6106.2006106.300 pedestal, TopConsole pedestals, Industrial Workstations, Data Rack
View Complete Details

Leveling Feet For TS

  • Model Number SO 2859.000
  • . Height 100 mm.
Mounted on TS, SE and PC enclosures, for easier floor cleaning and to compensate for floor irregularities of 15 mm. Height 100 mm.
View Complete Details

Trim Panel CM, TP

  • Model Number CM 5001.130
  • Height 24.5 mm (0.96 ˝)
  • Width 600 mm (24 ˝)
  • depth 400 mm (16 ˝)
To cover the entire base opening for CM or the entire roof opening when using TopConsole pedestals on their own.
View Complete Details

Base Plate Modules

  • Model Number DK 7825.360
  • Width 600 mm (24 ˝)
Base plate module, vented for TS, TS-IT, SE, for use in network enclosure base frames. To replace an existing base plate of the same depth.
View Complete Details

Pressure Relief Stoppers

  • Model Number SZ 2459.500
  • Material Polyamide
Pressure relief plug with integrated sealing membrane, specifically for exposure to changing climatic conditions (e.g. with outdoor siting).
View Complete Details

Condensate Discharge

  • Model Number SZ 2459.000
  • Material Polyamide
Condensate outlet for reliable condensate discharge from the inside and protection against splashed water from the outside (labyrinth effect).
View Complete Details

Fitting G

  • Model Number SK 3201.900
The G 38 internal threaded adaptor can be used to create fixed piping on the airwater heat exchanger for both the inlet and return.
View Complete Details

Enclosure Internal Fan

  • Model Number SK 3108.115
  • Voltage 115 V, 1~, 50 Hz/60 Hz
  • Air throughput 160 m³/h
To prevent hot spots inside the enclosure and facilitate the ventilation of active enclosure climate control components.
View Complete Details

Vent Attachment TS

  • Model Number TS 8801.380
The passive TS vent cap fits precisely onto the cut-outs for TopTherm roof-mounted cooling units. Can also be mounted on any roof surface of sufficient size.
View Complete Details

Vario Rack-mounted Fan

  • Model No. SK 3357.100
Guide frame for Vario rack-mounted fan: Installed directly in the subrack, using one or two mounting brackets on the 19" mounting level.
View Complete Details

RiDiag

  • Model Number SK 3159.300
For the diagnosis, maintenance and long-term data capture of TopTherm units using the e-Comfort controller. RiDiag logs equipment data and prepares an error list.
View Complete Details

Metal Gland Plates Metric Knockouts

  • Model Number SZ 2560.400
  • Width 160 mm
  • Version Solid
  • plate size 1
  • Depth 70 mm
As a sparereplacement part for flange plates supplied loose as standard, protection category IP 66 when mounting in the usual position at the bottom.
View Complete Details

Cable Routing Bars For Universal Use

  • Model Number DK 7111.212
For structured routing of entire cable bundles, all-round attachment for universal use, connection comb.
View Complete Details

CMC III Processing Units

  • Model No DK 7030.000
  • Number of sensors 32
  • system 2 x RJ45 CAN bus
The Processing UnitCompact is the central unit in the CMC III monitoring system. Up to 324 external sensorsCAN-Bus connection units can be connected to the integral sensors. The unit can be connected to the data network via Ethernet, configured via WebUSB, alarms can be sent via an e-mail server and the unit can be connected to the company Network Management System via SNMP.
View Complete Details

Connection Console

  • Model Number CP 6206.490
  • Color Console, lid: RAL 7024 Cable entry grommets: RAL 7035
For rear connection of slimline command panels. Removable cover for simple cable routing Removable cover for simple cable.
View Complete Details

TP Consoles

  • Model Number TP 6746.500
  • Height 973 mm (38 ˝)
  • Width 600 mm (24 ˝)
  • Depth 400 mm (16 ˝)
TP consoles, ready-to-use unit with high protection category IP 55 in four different widths. Tool-free assembly of lid with lid stay. Compatibility with TS 8 system accessories, such as a baseplinth and cable entry grommets.
View Complete Details

Support Section CP 180 Open

  • Model Number CP 6218.150
  • Length 500 mm (20 ˝)
  • Height 160 mm (6.3 ˝)
  • Width 90 mm (3.5 ˝)
Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors; lockable via cover profile. X-shaped profiling for greater load capacity, large cable routing channels. Upper channel suitable for cables with large connectors (e.g. DVI or VGA) and availableusable throughout the entire system.
View Complete Details

Op-mounted Joint CP 180 Horizontal Outlet

  • Model Number CP 6218.700
For swivel mounting of the support arm system on a horizontal surface also suitable for ceiling mounting. Removable cover for easy cable routing.
View Complete Details

Angle Piece

  • Model Number CP 6218.600
For connecting horizontal and vertical support arm components. Removable covers for easy cable routing.
View Complete Details

CS Wall-Mounted Housings

  • Model Number CS 9791.015
  • Height 522 mm (21 ˝)
  • Width 370 mm (15 ˝)
  • Depth 210 mm (8.3 ˝)
Outdoor housings for wall or pole mounting. Enclosure-within-an-enclosure concept, outer enclosure with cut-out at the bottom and integrated louvers on the rear and side panels for ventilation
View Complete Details

Operating Housing With Handle Strips

  • Model Number CP 6320.000
  • Height 200 mm (7.9 ˝)
  • Width 300 mm (12 ˝)
  • Depth 155 mm (6.1 ˝)
Command panel with handle strips in contemporary design of sheet steel, with 130 mm support arm cut-out to fit CP 60120180 support arm system, service access optionally from the front or rear, aluminum front panel easily removable for machining, protection category IP 55
View Complete Details

Hygienic Design PC Enclosure Systems

  • Model No HD 4000.062
  • Heigh 692 mm (27 ˝)
  • Width 810 mm (32 ˝)
  • Height 848 mm (33 ˝)
  • Depth 266 mm (10 ˝)
The HD modular production data enclosure provides secure accommodation for all PC components, from the monitor and screen to the printer, in hygienically sensitive areas that are subjected to regular cleaning. The HD modular production data enclosure is therefore the ideal solution for data traceability in the food industry.
View Complete Details

Air Water Heat Exchangers Wall-mounted HD

  • Voltage 230 V, 1~, 50 Hz/60 Hz
  • Model No SK 3214.700
  • Total cooling output L35 W10 200L 0.6 kW (2047 BTU)
  • Total cooling output L35 W10 400 0.65 kW (2217 BTU)
Airwater heat exchanger for production areas in the food and beverage industry where hygiene is important - the perfect addition to the Rittal Hygienic Design range. The easy-to-clean design reduces the risk of contamination and ensures food safety.
View Complete Details

Junction Boxes JB Stainless Steel

  • Model No JB 8018.134
  • Height 100 mm (3.9 ˝)
  • Width 100 mm (3.9 ˝)
  • Depth 75 mm (3 ˝)
The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.
View Complete Details

Pushbutton Boxes PB Stainless Steel

  • Model No. PB 8017.714
  • diameter 30.5 mm
  • Height 88 mm (3.5 ˝)
  • Width 82 mm (3.2 ˝)
  • Depth 69 mm (2.7 ˝)
The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.
View Complete Details

Fan Tray

  • Model No. DK 7968.035
  • Voltage 230 V
Can be retro-fitted from above in all TS 8 network enclosures. The rear section is left free for cable entry. Two fans as standard. Can be increased to max. 46 fans.
View Complete Details

Therm Chillers

  • Voltage 400 V, 3~, 50 Hz
  • Model No. SK 3335.790
  • Total cooling output W10 U32 6.5 kW (22178 BTU)
  • Total cooling output W18 U32 8 kW (27297 BTU)
TopTherm chillers in TS housing with a minimal base area can be integrated perfectly into an enclosure suite. Their modular design and the fact that there is one version for two frequencies mean that the chillers are very flexible. In addition, they are convenient to service and reliable, thanks to icing protection.
View Complete Details

Single-component Primers

  • Color Dark gray
  • Model No. SZ 2436.800
  • Content 12 ml
Single-component primers are ideal to protect against corrosion in areas where the paint has been removed due to cut-outs or similar. This serves to re-create corrosion resistance in the paint-free area. The primer satisfies the requirements of standard IEC 61439 for low-voltage and switchgear assemblies.
View Complete Details

Base Plates

  • Model No DK 5502.510
  • width 800 mm (31 ˝)
  • depth 600 mm (24 ˝)
Potential equalization via assembly components and grounding points are available . The base plate is set to cover the entire base opening.
View Complete Details

Width Divider

  • Model Number TS 8800.200
Width divider, divides 1200 mm wide TS and SE enclosures into two halves in the base assembly, to enable different configurations.C
View Complete Details

Hinges For Side PaneL

  • Model No. TS 8800.110
The 180 opening angle allows unhindered access. Can be installed optionally from the inside or outside of the enclosure. A hinge can be used in place of three enclosure panel holders. The enclosure retains the same protection category when a hinge used.
View Complete Details

Quick-fit Baying Connector

  • Model No TS 8800.500
Simply attach the screws, insert the quick-release baying connector, tap in with a hammer and secure.
View Complete Details

Baying Brackets

  • Material Carbon steel
  • Model No TS 4582.500
To provide additional stabilization, or in cases where mounting plate brackets, pivoting frame or busbar support prevent the installation of angular baying brackets.
View Complete Details

Self-adhesive

  • Model No. SZ 2573.000
To seal the cable entry between the base plates, particularly suitable for cables with identical cross-sections.
View Complete Details

PC Enclosure Systems

  • Model No PC 5386.000
  • Height 1600
  • Width 800
  • Depth 636
Secure accommodation of all PC components, from monitors, to PCs, to keyboards. For ultimate ease of operation in a contemporary design. Complete protection from humidity and dirt, temperature fluctuations and unauthorized access.
View Complete Details

Upport Section CP 180 Solid

  • Model No. CP 6218.050
  • Length 500 mm (20 ˝)
  • Height 160 mm (6.3 ˝)
  • Width 90 mm (3.5 ˝)
Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any length required, no thread-tapping necessary. Closed cable duct with a large cross-section.
View Complete Details

CP 180 Coupling

  • Model No. CP 6218.300
For swivel mounting the housing on the vertical section of the CP 180 support arm system.180 for support arm connection 130 mm
View Complete Details

Assembly Tool For HD Cable Glands

  • Model No. HD 2410.290
To secure HD cable glands in an internal thread or using lock nuts, either from the inside or from the outside using an Allen key.
View Complete Details

Lockable Adjacent Door

  • Model No. TS 8801.450
  • height 2000 mm (79 ˝)
  • width 800 mm (31 ˝)
Where two 400 mm doors need to be used instead of one 800 mm wide door to provide for escape routes.
View Complete Details

TopTherm Chillers 1 - 6 KW

  • Voltage 230 V, 1~, 50 Hz/60 Hz
  • Model No. SK 3318.600
  • Total cooling output W10 U32 0.8 kW (2729 BTU)
TopTherm chillers in roof-mounted or stand-alone versions are flexible and compact. They offer centralized and efficient cooling of the cooling water and supply airwater heat exchangers and other devices. With nano-coated condenser as standard
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Rittal Corporation)
  • Urbana, OH 43078, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/rittal-corporation/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0007457888{main}( ).../index.php:0
20.02252155224include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.03412877808include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.04263813504header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice