Our Products #4785282

Based on the Texas Instruments TMS320C667x, RTDs SPM34CP dspModules are versatile fixedfloating point embedded DSP controllers with a PCIe104 stackable bus structure. The onboard DSP chip supports high-performance signal processing applications such as imaging, test, and automation. Deterministic processing allows the DSP to outperform general purpose processors for time-critical applications. The C6678 platform is power-efficient and easy to use. The C66x CorePac DSP is fully backward compatible with TIs existing C6000 family of fixed and floating point DSPs. High-speed data connections such as PCI Express, Serial RapidIO, and Gigabit Ethernet connect the DSP to the outside world. The PCI Express connector permits the DSP to act as a co-processor to a PCIe104 Type 2 host cpuModule while 16 Mbyte of onboard flash permits true stand-alone operation of the DSP without a host. A high-speed multifunction interface enables systemlevel peertopeer data transfer. Additional hardware features include one RS-232422485 serial port as well as fourteen 5V-tolerant 3VTTL digital IO. When paired with an RTD cpuModule and a high-speed signal sourcedrain (e.g. RTDs DM35418HR dataModule), the result is a complete high-speed data acquisition, signal processing, and decision-making system. The Gigabit Ethernet connections, or stackable Serial RapidIO (which boasts four configurable lanes), are ideal for high-speed data transfers between the DSP and the mated data acquisition board or system. The SPM34CP is available in dual-core and octal-core configurations and includes a suite of matching host-side and DSP-side libraries permitting single and multi-threaded applications for all on-board features.

The LAN35H08 is an 8-port 101001000 Ethernet switch. This switch module has a total of 10 ports: eight ports are available on-board, one port is available to the host CPU through a x1 PCI Express GigE controller, and one port is used as a switch expansion port. This design allows the CPU to use the switch without the need for external cables. The LAN35H08 can also be used as an expandable, standalone 8-port Ethernet switch (using the LAN35E08). These Gigabit Ethernet switches are available with 10-pin DIL connectors (LAN35H08HR-D) or with RJ-45 connectors (LAN35H08HR-RJ).

The LAN34225 and LAN24225 are server grade, dual Gigabit Ethernet Modules. They provide two Small Form-factor Pluggable (SFP) connectors that will accept a pre-installed multi-mode Fiber SFP module, or a customer supplied SFP module. This allows the flexibility to have any combination of multi-mode fiber, single-mode fiber, or twisted pair interfaces. A PCIe x4 interface ensures excellent bandwidth for communication with the CPU.

The DM35224 and DM35424 are software configurable simultaneous sampling data acquisition modules. The DM35224 provides 8 differential analog input channels, with programmable gains. It also provides 8 individually controlled analog outputs and digital IO. The DM35424 doubles the number of analog IO to 16. This board is targeted to sensors that require high precision with a low signal level, such as accelerometers, pressure transducers, and Resistance Temperature Detectors (RTD). The DAC output can provide sufficient current and voltage for the excitation voltage of most sensors.

The LAN10257 is a 5-port 101001000 standalone Ethernet switch. This module provides five RJ45 ports with auto-configuration so any of the ports can be upstream or downstream. Connections to an optional host are made via cabling.

This family of 101001000 Ethernet switches offers five total ports: four ports are available on-board, and one port is available to the host CPU through a x1 PCI Express Gigabit Ethernet controller. This design allows the CPU to use the switch without the need for external cables.

The GPS25165 and GPS35165 are PC104 modules that combine a GPS receiver with an inertial sensor and altimeterbarometer sensor. These GPS products utilize the Linx RXM-GNSS-TM GPS receiver. This low-power solution supports NMEA-0183 protocol. Support for +3.3V and +5V active antennas is provided. The GPS25165HR and GPS35165HR utilize one PCIe x1 link to provide three 16C550 compatible serial ports: one for GPS, one for sensors, and one for onboard serial connector.

Analog Input: Independent or Simultaneous Sampling, 4 or 8 analog inputs, 18-bit differential or single ended, 1.5 MHz throughputAnalog Output: 4 or 8 analog outputs, 16-bit single-ended, 1 microsecond settling timeDigital IO: 32 digital IO 3V TTL level or 16 LVDSDM35218HR4 channels $1375DM35218HRF7504 channels with antialiasing filters $1675DM35418HR8 channels $1775

Bus Mastering: Master or Target OnlyAnalog Input: 12-bit, 1.25 MHz, 8 differential or 16 single ended, 1K FIFO buffer, channel gain table with skip bit, pacer & burst clocks data markersAnalog Output: 2 channel, 12 bit, 200 kHz throughput, independent 1K FIFO buffersUser TimerCounters: Three 16-bitDigital IO: 16 buffered TTLCMOS lines. Two independent ports of 8-Bits each. Port 0 is bit direction programmable. Port 1 is byte direction programmable. Advanced interrupt modes and bit masking.$845

Bus Mastering: Master or Target OnlyAnalog Input: 12-bit, 1.25 MHz, 8 differential or 16 single ended, 1K FIFO buffer, channel gain table with skip bit, pacer & burst clocks data markersAnalog Output: 2 channel, 12 bit, 200 kHz throughput, independent 1K FIFO buffersUser TimerCounters: Three 16-bitDigital IO: 16 buffered TTLCMOS lines. Two independent ports of 8-Bits each. Port 0 is bit direction programmable. Port 1 is byte direction programmable. Advanced interrupt modes and bit masking.$845

The DM35224 and DM35424 are software configurable simultaneous sampling data acquisition modules. The DM35224 provides 8 differential analog input channels, with programmable gains. It also provides 8 individually controlled analog outputs and digital IO. The DM35424 doubles the number of analog IO to 16. This board is targeted to sensors that require high precision with a low signal level, such as accelerometers, pressure transducers, and Resistance Temperature Detectors (RTD). The DAC output can provide sufficient current and voltage for the excitation voltage of most sensors.