Our Products #4841100

Master link with an integrated shortening option specially developed for the 4mm ICE lifting chain. With the pressing of the locking bolt the chain crucifix is freed and the chain can be mounted and respectively be adjusted to the desired length. Ideal for small loads up to 1120 kg (in a 2- leg application). ICE-Minilifter is marked by the RUD-ID-TAG (RFID chip) and with the clear identification number distinguished.

After decades of success, the VIP-Multi-Shortening claw has been further enhanced. Manufactured in compliance with DIN 5692 and can be captively fitted along the chain leg. No additional chain and coupling components are required. It can be moved to any position along the chain leg. The ideal link shaped chain pocket provides an optimal fitting for the chain thus no reduction of the WLL. A robust safety bolt with a spring prevents the accidental loosening of the fitted chain in both loaded and unloaded conditions. Detailed handling instructions are provided.

ICE-End link with an all direction movable welded IRG connector, thus ensuring that only the correct chain diameter and number of strands can be connected. ISAK-Special master links can be used for this but without ICE-KZA identification tag. The ICE-load and retaining pins are preassembled. Surface: ICE-Pink powder coated ICE-End link is marked by the RUD-ID-TAG (RFID chip) and with the clear identification number distinguished.

ICE-Star-Hook ISH - suitable down to -60C. Due to its innovative construction, the skeletal design ICE-SH Star Hook is up to 25 % lighter than Grade 8 hooks of the same WLL, i.e. the next larger size. The large width of the throat of the hook is the same dimensionally as the million fold successful Granit-Super Hook - of the next larger size - so not everything was reduced. The safety latch of the RUD-Hook family, the GSH, SH, Cobra and ICE-Star Hook are interchangeable. (Make sure to select the correct diameter) - easy to supply spare parts.

quick, robust and user friendlyquick attachment, without separate unlatchingsimplified hinge and unhinge of the suspension ring by ergo-nomic designed locking latchLocking latch with slide resistant shapeProtection rips to prevent the locking latch from damage and im-pact shockssuitable for standardized dump truck studs acc. to DINEN 30720

Often referred to as the container hook. Considerably larger mouth width than ISH but without a safety latch. Use only where unintentional unhooking is impossible. Inappropriate for overhead lifting! When using foundry hooks, special attention must be paid and a risk assessment must be carried out before using. Robust cross section (SizeCG) is resistant against increased lateral forces. Specially designed wearing edges to protect the chain link, compare the dimension "E". Gauge marks for measuring the width of the hook opening . Connecting bolt and tensioning sleeve are pre-assembled. ICE-Foundry Hook is marked by the RUD-ID-TAG (RFID chip) and with the clear identification number distinguished.

ICE-Master link 1-leg with an all direction movable welded IRG connector, thus ensuring that only the correct chain diameter and number of strands can be connected. Complete identification tag with an integrated chain testing gauge. Pre-assembled connecting bolt and tensioning sleeve. The size corresponds with that of suspension link type A acc. to DIN 5688, manufactured in compliance with EN 1677-4. ICE-Master link is marked by the RUD-ID-TAG (RFID chip) and with the clear identification number distinguished.

ICE 2-leg master link with 2 all direction, movable welded VRG connectors. Thus ensuring that only the correct chain diameter and number of legs can be connected. The ICE load and retaining pins are preassembled. Delivered complete with a flexible, 2-leg identification tag with integrated testing gauge. ICE-Master link is marked by the RUD-ID-TAG (RFID chip) and with the clear identification number distinguished. Surface: ICE-Pink powder coated Measurements correspond to the master link A according to DIN 5688 but one chain diameter larger. Manufactured according to DIN EN 1677-4.

ICE-Round steel chain are manufactured and tempered with a patented material. They have a high hardness and are insensitive to hydrogen embrittlement like Grade 10.The application of the RUD-Grade 12 is issued by the BG and is stamped with "D1-12". D="Degree of Quality", 1 is the manufacturers number 1 = RUD. 12 is the corresponding Grade 12.Surface: phosphated and oiled

ICE-Round steel chain are manufactured and tempered with a patented material. They have a high hardness and are insensitive to hydrogen embrittlement like Grade 10.The application of the RUD-Grade 12 is issued by the BG and is stamped with "D1-12". D="Degree of Quality", 1 is the manufacturers number 1 = RUD. 12 is the corresponding Grade 12.Surface: ICE-Pink powder coated.