Safety Today

United States

"This plain cover (no opening) fits pails from 3.5 gallon to 6 gallon. Snap on cover with tear tab provides tamper evidence. Equipped with an EPDM gasket for positive seal, these covers can be reused once the tab is broken. Made with FDA Approved high density polyethylene. . Fits Pail Size: 3.5 - 6 gal. Wt.: .7 lb Diameter: 12 132"" Height : 1 716"""

• Glove Thickness5 Mil
• Glove ShellLightly Powdered
• Glove Shell ColorLightly PowderedLightly Powdered
• Glove SizeLarge

Clean Hand® designates products that are used in a wide range of applications. Single-use gloves establish a barrier between workers and the products or people with which they work. The Hazard Analysis and Critical Control Point system is an important step. The use of protective gloves, such as Volk Protective Products Clean Hand® brand single-use gloves, available in latex, polyeth-ylene, vinyl or nitrile, is recommended to help prevent cross-contamination and help ensure a sanitary environment in foodservice and food processing operations.

Safety Station with Eyewash, Stainless Steel Bowl and Cover Application: Combination eyewash and shower safety station. Eyewash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes. Shower Head: 10" diameter orange ABS plastic. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. Spray head assembly: Two GS-Plus™ spray heads. Each head has an internal flow control and filter to remove impurities from water. EyeFace wash bowl: 11-12" stainless steel with stainless steel cover. EyeFace wash valve: 12" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Pipe & fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. Supply: 1-14" NPT female top or side inlet. Waste: 1-14" NPT female outlet. Outlet can be positioned at either 9-14" or 19-58" above finished floor by reversing lower pipe nipples. Sign: Furnished with ANSI-compliant identification sign. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Safety Station with Eyewash, Stainless Steel Bowl and Cover Application: Combination eyewash and shower safety station. Eyewash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two GS-Plus� spray-type outlet heads deliver a flood of water for rinsing eyes. Shower Head: 10" diameter orange ABS plastic. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. Spray head assembly: Two GS-Plus� spray heads. Each head has an internal flow control and filter to remove impurities from water. EyeFace wash bowl: 11-12" stainless steel with stainless steel cover. EyeFace wash valve: 12" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Pipe & fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. Supply: 1-14" NPT female top or side inlet. Waste: 1-14" NPT female outlet. Outlet can be positioned at either 9-14" or 19-58" above finished floor by reversing lower pipe nipples. Sign: Furnished with ANSI-compliant identification sign. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Safety Station with Eyewash, Stainless Steel Bowl and Cover Application: Combination eyewash and shower safety station. Eyewash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two GS-Plus� spray-type outlet heads deliver a flood of water for rinsing eyes. Shower Head: 10" diameter orange ABS plastic. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. Spray head assembly: Two GS-Plus� spray heads. Each head has an internal flow control and filter to remove impurities from water. EyeFace wash bowl: 11-12" stainless steel with stainless steel cover. EyeFace wash valve: 12" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Pipe & fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. Supply: 1-14" NPT female top or side inlet. Waste: 1-14" NPT female outlet. Outlet can be positioned at either 9-14" or 19-58" above finished floor by reversing lower pipe nipples. Sign: Furnished with ANSI-compliant identification sign. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.