Post Buy Requirement
SG
United States
Add Review

Other Products / Services

ClasSiC CMP Slurries For SiC Polishing

  • Use pH 2.0 to 2.5
ClasSiC CMP Slurries for SiC Polishing


ClasSiC Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning ClasSiC alumina polishing slurries are high-precision slurries specifically formulated for the chemical mechanical planarization of silicon carbide wafers used in the fabrication of LED and power electronic devices. Made with Saint-Gobains nano alumina abrasives, ClasSiC CMP slurries greatly enhance removal rate and planarization performance, delivering an excellent surface finish on SiC wafers.

ClasSiC slurries are formulated with high-efficiency oxidizers, tightly sized engineered nano-particles, and accelerant chemistries that facilitate very low surface finish, defectivity and sub-surface damage on all SiC surfaces. These unique slurries provide exceptionally low TTV, LTV, and Warp values and deltas. ClasSiC slurries offer colloidal and oxidative stability, making them easy to manage and clean.

Benefits

Exceptionally high removal, >2hr.
Excellent surface finish, typically
View Complete Details

AmberLap

  • pH (2% dispersion) 10.2
  • Ultimate particle size 250 - 600 Ã…
AmberLap S600



Abrasive Suspension Agent
AmberLap S600 is a water dispersible, abrasive suspension agent designed for use in the free abrasive lapping of silicon wafers and other ceramic substrates. When used with an AmberCut slurry vehicle, it imparts excellent abrasive suspension for extended periods of time. Slurries that utilize AmberLap S600 exhibit low viscosities and superior shear stability whichi allows slurry reuse without the loss of abrasive suspension. Such slurries have shown the ability to dramatically reduce process cycle time while lowering scratch defect rates and improving yields. AmberLap S600 is completely water dispersible and rinsable and will not leave films or residues.
Imparts excellent abrasive suspension for extended periods of time
Reduces process cycle time
Reduces scratch defect rates
Improves process yields
Maintains suspension after exposure to high shear
Slurries exhibit low static viscosities
Completely water dispersible
Will not leave films or residues
View Complete Details

Water Soluble Diamond Compounds

  • Size Standard sizes ranging from 0.10 to 50μm Custom-designed particle size distributions upon request
Water Soluble Diamond Compounds



Water Soluble Diamond Compounds Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning's Amplex brand water-soluble diamond compounds deliver an excellent surface finish on a variety of hard metals.

Through our extensive knowledge in processing and sizing diamond powders, Saint-Gobain offers tight control of oversized particles to minimize scratching. We can apply our expertise in formulation chemistry to customize a compound that meets your specific application need.

WS-HV Compound
WS-HV is Saint-Gobains most widely used water-soluble diamond compound. The perfect choice for a variety of general lapping and polishing applications, WS-HV contains a mixture of synthetic lubricants and surfactants that make it completely soluble in water. The compound can be diluted and lubricated with Saint-Gobains WS Thinner.
W772C Compound
Saint-Gobain W772C is a water-soluble diamond compound designed specifically for polishing wire dies, where compound flow inside the hole of the die is critical. Its relatively low viscosity compared to other compounds allows W772C to flow slowly inside the die, for precise performance.

Applications

Wire die and mold polishing
Polishing hard metals (Rockwell C of 45 or greater)
Benefits

Delivers consistent performance, time after time
Precision-graded diamond
Statistical processed controlled, ISO certified manufacturing
Semi-automated manufacturing process minimizes contamination and handling errors
Knowledgeable application engineers available for consultation
View Complete Details

Oil Soluble Diamond Compounds

  • Size Standard sizes ranging from 0.10 to 50μm Custom-designed particle size distributions upon request
Oil Soluble Diamond Compounds



Oil Soluble Diamond Compounds Saint-Gobain Surface Conditioning
Saint-Gobain oil soluble diamond compounds provide consistent and reliable performance in lapping and polishing processes that require a high finish and close tolerance.

Our Amplex brand diamond compounds are made from precision-graded diamond powders that meet demanding quality specifications. Saint-Gobain takes great care in selecting the highest quality diamond in terms of cleanliness and particle size distribution to ensure repeatable and reproducible quality.

OS-HV Compound
A widely used oil-soluble diamond compound, Saint-Gobain OS-HV is highly effective for polishing metal and stainless steel components. Suitable for use as supplied, OS-HV compound also can be diluted with Saint-Gobains OS Thinner to help thin, lubricate and spread the compound on the work piece.

Applications

Wire die and mold polishing
Polishing hard metals (Rockwell C of 45 or greater)
OS458C2 Compound
Saint-Gobain Surface Conditioning's Amplex O458C2 is the oil-based compound of choice for providing aggressive stock removal and a mirror-like finish on a variety of hard substrates such as tungsten carbide, silicon carbide and aluminum oxide components. Our O458C2 compound offers proven performance in charging lap plates as well as polishing wire dies, molds, ceramics and sapphire windows.

Applications

Mold, tool and wire die polishing
Industrial lapping of metals and ceramics
Benefits

Provides fast material removal rate and controlled surface finish
Delivers consistent performance, time after time
Precision-graded and high purity diamond
Statistical process controlled, ISO certified manufacturing
Semi-automated manufacturing process minimizes contamination and handling errors
Knowledgeable application engineers available for consultation
View Complete Details

Universal Soluble Diamond Compound

  • Size Standard sizes ranging from 0.10 to 50μm Custom-designed particle size distributions upon request
Universal Soluble Diamond Compound



Universal Soluble Diamond Compound Saint-Gobain Surface Conditioing
Saint-Gobain Surface Conditioning's Amplex Superabrasives universal soluble diamond compound is a user-friendly, versatile product for general polishing applications. Specially formulated to be both water and oil soluble, U335C2 delivers a shiny finish on molds and wire dies with excellent coating properties.

When used with W698T Thinner, it behaves like a water-soluble compound. But when used with OS Thinner, it performs like an oil soluble compound.

Made with highly refined, precision-graded diamond powders, Saint-Gobains Amplex brand universal soluble compound offers a highly lubricating and homogenous paste for consistent and controlled performance.

Applications

Wire die and mold polishing
Polishing hard metals (Rockwell C of 45 or greater)
Benefits

Delivers consistent performance, time after time
Statistical process controlled, ISO certified manufacturing
Semi-automated manufacturing process minimizes contamination and handling errors
Universally soluble compound
Highly lubricated to produce a brilliant surface shine
High thermal conductivity
Knowledgeable application engineers available for consultation
View Complete Details

Water-Based Slurries

  • Size Standard sizes ranging from 0.10 to 50µm Custom-designed particle size distributions upon request
Water-Based Slurries
Saint-Gobain offers a wide selection of ready-to-use water-based suspension slurries for general lapping and polishing. They are specially formulated to keep the abrasive particles uniformly dispersed and suspended.

Made with highly refined, precision-graded diamond powders for consistent performance, Saint-Gobains water-based slurries are highly regarded by operators running high volume manufacturing (HVM) processes. Our environmentally friendly products are differentiated by their performance, allowing customers to remove faster and finish better for lower total cost of ownership.

W600 Slurries
Designed for polishing metals, our W600 series are water-based diamond slurries with low viscosity. They contain cut-rate enhancers that provide aggressive cutting action during metallographic polishing while helping to reduce scratching and sub-surface damage to the work surface
Industrial Diamond Lapping Slurries


W768 Slurries

Saint-Gobains W768 slurry line features cut-rate enhancers for aggressive cutting action during lapping along with lubricants that help reduce scratching and sub-surface damage to the work piece.

BLC40 Slurry

Saint-Gobains BLC 40 slurry features unique suspension additives that easily disperse diamond particles through electrostatic repulsion. BLC40 is specially formulated with environmentally friendly lubricants that produce a very smooth surface after lapping.


W809 Slurries
Saint-Gobain Surface Conditioning's W809 series of water-based diamond suspension slurries feature additives that prevent agglomeration of particles which helps to minimize scratches, and cut-rate enhancers for aggressive cutting action. W809 slurries can achieve below 10 A surface roughness on single crystal substrates, making them ideal for use before the final CMP step.

W809NDS is designed for pre-polishing wafers such as SiC and other hard crystals before CMP.

W809HNS is designed for pre-polishing wafers such as GaN and other hard crystals before CMP.

Benefits

Provides excellent wetting and spreading of slurry during the lapping process
Reliable performance and user-friendly for high volume manufacturing processes
Keeps the plate running cool during lapping, making it ideal for high volume lapping operation
Provides fast material removal rate and controlled surface finish
Field tested and industry approved
Contains no petroleum distillates
Knowledgeable application engineers available for technical support
View Complete Details

Lubricant-Based Slurries

  • Size Standard sizes ranging from 0.10 to 50μm Custom-designed PSDs upon request
Lubricant-Based Slurries

Lubricant-Based Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning's lubricant-based diamond slurries are all-in-one, low viscosity suspension products with lubricants, dispersants and cut-rate enhancers to provide very good surface finish at an accelerated speed. Designed for polishing metals and stainless steel, the slurries are safe to work with and completely biodegradable.

Ready to use with low viscosity for easy spraying, our lubricant-based slurries feature highly refined and precision-graded diamond powders that offer high bulk purity and consistent performance. Saint-Gobain also offers both low and high viscosity slurries to accommodate different diamond sizes.


Benefits

Precision-graded and high surface purity diamond
Provides fast MRR and controlled surface finish
Field tested and industry approved
Biodegradable
Knowledgeable application engineers available for technical support
View Complete Details

Alcohol-Based Slurries

  • Size Standard sizes ranging from 0.10 to 50μm Custom-designed particle size distributions upon request
Alcohol-Based Slurries

Alcohol-Based Diamond Polishing Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning offers a line of alcohol-based, low viscosity diamond slurries for polishing metals and crystals that promote fast drying of parts while minimizing water staining. Made from highly refined, precision-graded diamond powders, these slurries contain a low concentration of alcohol plus lubricants, dispersants and cut-rate enhancers to deliver a good surface finish at an accelerated rate.



W767S Slurry
Combines water-basedalcohol-based slurry
Provides fast drying of parts compared to water-based slurries
Can suspend up to 15m diamond


Dia-Slick II Slurry
Contains a high concentration of alcohol for faster drying than W767S
Ideal for polishing parts that cannot come into contact with water
Can suspend up to 20m diamond


Benefits

Provides fast material removal rate and controlled surface finish
Field tested and industry approved
Biodegradable
Fast drying
Knowledgeable application engineers available for technical support
View Complete Details

Oil-Based Slurries

  • Size Standard sizes ranging from 0.10 to 50µm Custom-designed particle size distributions upon request
Oil-Based Slurries

Oil-Based Polishing Slurries Saint-Gobain Surface Conditioning
Designed for lapping and polishing ceramics and sapphire, Saint-Gobain Surface Conditioning's oil-based slurries are made from highly refined, precision-graded diamond powders. The O854 series provides aggressive cutting action during lapping, with lubricants to help reduce scratching and damage to the work piece. Safe to work with, Saint-Gobains oil-based slurries comply with EPA and OSHA requirements.



O854BS Slurry
Saint-Gobain O854BS is a unique diamond suspension slurry that can suspend very coarse particles at a relatively low viscosity. It provides a fast material removal rate and controlled surface finish.




O856LVS Slurry
Saint-Gobain O856LVS is a semi-suspension, oil-based diamond slurry that produces a superior surface finish when lapping and polishing ceramics and other hard materials. O856LVS can semi-suspend up to 50m diamond and works particularly well on harder plates such as cast iron.
O854US Slurry
Saint-Gobain O854US is designed specifically for lapping of sapphire on copper plates. A low viscosity slurry, O854US earns rave reviews from customers for its unique suspension properties and aggressive cutting action.





Benefits

Precision-graded and high surface purity diamond
Provides excellent wetting and spreading of slurry during lapping
Provides fast material removal rate and controlled surface finish
Unique low viscosity diamond suspension slurry
Field tested and industry approved
Knowledgeable application engineers available for technical support
View Complete Details

Oil-Based Lapping Slurries

  • Size Standard sizes ranging from 0.10 to 50μm Custom sizes available upon request
Oil-Based Lapping Slurries

Oil-Based Lapping Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning offers a line of oil-based lapping slurries designed for surface finishing of stainless steel, metal and ceramic components. Our ready-to-use slurries contain cut-rate enhancing lubricants, dispersants, corrosion inhibitors and suspension additives to extend the life and performance of the slurry.

Safe to work with and environmentally friendly, Saint-Gobains oil-based slurries comply with EPA and OSHA requirements.



MCA 852D Alumina Slurry
Saint-Gobain MCA 852D is a high viscosity, oil-based alumina slurry that has been optimized for lapping and polishing a wide range of metals, plastics and some ceramics (alumina and zirconia). Its smooth, creamy texture allows the slurry to adhere to parts and remain on the plate longer during lapping and polishing, for the most efficient and consistent cutting.
Applications

Lapping and polishing plastics and ceramics
Lapping metals: stainless steel, aluminum, carbides, hardened steel and others


MCA 2242 Alumina Slurry
A relatively low viscosity oil-based suspension slurry designed for general industrial lapping, Saint-Gobain MCA 2242 alumina slurry provides fast cutting on ceramics and metal parts used in automotive and steel applications. MCA 2242 contains suspension additives to prevent hard packing of the abrasive during use, helping to keep more abrasive particles in the slurry participate in cutting during lapping.



Applications

Lapping seal rings, carbides and hardened steel
Excellent dispersion properties
Provides fast material removal rate and controlled surface finish
Ready-to-use slurry
ISO certified for consistent quality
Lapped parts can be cleaned easily with commercially available alkaline cleaners
MCA 852D can be diluted 1:1 with water or oil (depending on desired final viscosity)
Knowledgeable application engineers available for technical support
View Complete Details

Water-Based Lapping Slurries

  • Size Standard sizes ranging from 0.10 to 50 μm Custom sizes available upon request
Water-Based Lapping Slurries

Water-Based Lapping Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning's water-based lapping slurries provide safe lapping and polishing of a wide range of metals, ceramics, crystals and glass. Our environmentally friendly slurries keep plates running cool by minimizing sludge buildup and allowing the plates to dissipate heat during operation.

Saint-Gobains water-based alumina slurries contain lubricants, dispersants, corrosion inhibitors and suspension additives that enhance cut rate and performance. Many of our alumina slurries are specially formulated for use in recirculation mode to extend the life of the slurry during lapping.



MCA 2103 Alumina Slurry
Saint-Gobain MCA 2103 is a low viscosity water-based slurry that is widely used for lapping glass components to achieve uniform flatness.


Applications

Lapping glass, metals, stainless steel and others
MCA 2185 and MCA 2287 Alumina Slurries
A medium viscosity slurry used for lapping metals and automotive components, Saint-Gobain MCA 2185 is excellent for suspending abrasives in solution, which helps to carry the abrasive from the container to the lapping machine while evenly distributing the slurry on the plate.

Similar to MCA 2185 in viscosity and application, Saint-Gobain MCA 2287 slurry features a higher concentration of thermally conductive lubricants to keep the plates well lubricated, preventing plates from drying out too fast due to overheating.


Applications

Lapping and polishing ceramics: sapphire, AITiC, SiC and WC
Lapping and polishing metals: 316L, 4120, piston rings and others


MCA 2220A Alumina Slurry
Saint-Gobain MCA 2220A is one of our higher viscosity lapping slurries thats widely used for lapping outer edges of seal rings. The higher viscosity of the slurry allows the abrasive particles to stay inside the sleeves longer where the seal rings come in contact to shape and smooth out the edges.


Applications

Lapping metals: 316L, 4120, seal rings and others
Excellent dispersion properties
Provides fast material removal rate and controlled surface finish
Reduces sludge buildup and prevents drying
No staining parts
ISO certified for consistent quality
Lapped parts can be cleaned easily with commercially available alkaline cleaners
Knowledgeable application engineers available for technical support
View Complete Details

Oil-Based Polishing Slurries

  • Size Standard sizes ranging from 0.10 to 50 μm Custom sizes available upon request
Oil-Based Polishing Slurries

Oil Based Polishing Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning's oil-based polishing slurries feature cut-rate enhancing lubricants, dispersants, corrosion inhibitors, and suspension additives to maximize slurry life and performance. Safe and ready-to-use, our oil-based alumina slurries provide fast material removal and a controlled surface finish on a variety of metals.



MCA 852C Alumina Slurry
A high viscosity, oil-based alumina slurry with a smooth and creamy texture, Saint-Gobain MCA 852C contains special lubricants that lower the friction coefficient on the polishing surface to minimize drag and reduce subsurface damage. MCA 852C is designed for lapping and polishing stainless steel and metal components and may be diluted with water or oil to extend the life of the slurry.

Applications

Polishing plastics and ceramics
Lapping metals: stainless steel, aluminum, carbides, hardened steel and others


MCA 2225A Alumina Slurry
Developed specifically for polishing ball bearings, Saint-Gobain MCA 2225A is an oil-based alumina slurry that delivers maximum material removal while minimizing scratches and bringing luster to the polish. Made using highly refined powders for tight sizing and high purity, MCA 2225A can be used straight as an oil-based slurry or as a concentrate by diluting it with water-based coolants



Applications

Lapping and polishing metals and stainless steel: ball bearings
Excellent dispersion properties
Provides fast material removal rate and controlled surface finish
Ready-to-use slurries
MCA 2225A is also available in dilutable concentrate form
MCA 852C can be diluted 1:1 with water or oil depending on desired viscosity
ISO certified for consistent quality
Lapped parts can be cleaned easily with commercially available alkaline cleaners
Knowledgeable application engineers available for technical support
View Complete Details

Water-Based Polishing Slurries

  • series MCA 768G, MCA 2189D
Water-Based Polishing Slurries

Polishing Slurries
Saint-Gobain water-based polishing slurries feature excellent dispersion properties and cut-rate enhanced additives for fast material removal and outstanding surface finishing on a wide range of materials. Our high-performance alumina polishing slurries are safe, easy to use and friendly to the environment.


MCA 110L and 110Q Alumina Slurries
Specifically designed for polishing plastic lenses, Saint-Gobain MCA 110L is a low viscosity water-based slurry that provides excellent finishes without scratches. In a high volume mass production setting, MCA 110L slurry can polish hundreds of lenses with a yield rate greater than 90%. MCA 110L offers high abrasive loading for longer slurry life In applications where the slurry is re-circulated and reused.

Saint-Gobain MCA 110Q is a plastic lens slurry that delivers excellent polishing results at a competitive price. MCA 110Q is designed to be used in a limited re-circulation mode and may have a shorter life cycle than MCA 110L.

Applications

Polishing plastic lens material: MR-8, CR, NK, 1.67, 1.61 and polycarbonate lenses
Polishing metals: aluminum, carbides and stainless steel components
MCA 768G Alumina Slurry
Designed for polishing metallographic parts and metal components, Saint-Gobain MCA 768G is a high viscosity, water-based slurry that provides an exceptional polish on metallographic components with a minimal amount of slurry. A ready-to-use product, MCA 768G may be diluted with water to extend the life of the slurry.
Applications

Polishing metallographic components
Lapping metals: stainless steel, aluminum, carbides hardened steel and others
MCA 2189D Alumina Slurry
Saint-Gobain MCA 2189D water-based slurry offers consistent polishing performance with well-controlled dispersion properties. Perfect for safe lapping and polishing of a wide range of metals, ceramics and crystals, MCA 2189D contains additives to properly disperse alumina particles, providing a very clear and bright polish on plastics and metals.

Applications

Lapping of ceramics and plastics
Lapping and polishing metals: 316L, 4120 and other stainless steel components
Benefits

Excellent dispersion properties
Works on both free form or conventional polishers
Alumina made to discrete particle sizes to help minimize scratches caused by oversize particles
Provides fast material removal rate and controlled surface finish
Ready-to-use slurry; can be re-circulated
ISO certified for consistent quality
Parts can be cleaned easily with commercially available alkaline cleaners
Ease of use with no hard packing
Knowledgeable application engineers available for technical support
View Complete Details

Polycrystalline Alumina Polishing Slurries

  • series 9240 and 9245
Polycrystalline Alumina Polishing Slurries

Polycrystalline Alumina Polishing Slurries Saint-Gobain Surface Conditioning
Saint-Gobain Surface Conditioning's polycrystalline alumina slurries provide optimal cutting performance in a variety of polishing applications.

A pioneer in the development of seeded gel abrasives, Saint-Gobains groundbreaking technology produces a grain with a unique nano-structure composed of extremely uniform, equiaxial and sub-micron crystals. Under stress, the nano-structured crystal network allows micro-fracturing, continually exposing new cutting edges that keep the particle sharper than conventional abrasives for longer-lasting abrasive performance.

Saint-Gobain polycrystalline alumina polishing slurries are available in both acidic and basic pH conditions and in particle sizes ranging from 150nm to 2um, depending on the product. Our team of engineers will work with you to recommend the best-performing alumina slurry for your application.
9240 and 9245 Polycrystalline Alumina Slurries
Saint-Gobains 9240 and 9245 aqueous alumina slurries feature fundamental crystal size ranges from 50 to 100 nanometers. The unique composition of extremely small crystals, primarily alpha alumina, results in a very cost effective, rapid polishing slurry that achieves highly polished finishes on a variety of materials such as metals, crystals and ceramics.

Our 9240 (alkaline pH) and 9245 (acidic pH) slurries can be used with pads or pitch, and depending on the application, on soft metal plates.



9221 Polycrystalline Alumina Slurry
Specifically designed for optimal polishing performance on C-plane sapphire, Saint-Gobains 9221 nano alumina slurry offers a slight modification to the crystal structure of 9240 alumina slurry, allowing for more aggressive and abrasive cutting action on sapphire. Available in basic solution in 0.35um and 1.2um sizes and custom sizes depending on the application, Saint-Gobain 9221 alumina slurry is capable of achieving < 3 Angstrom Ra with no visible scratches.



9220 Polycrystalline Alumina Slurry
Saint-Gobain 9220 polycrystalline alumina polishing slurry is an aqueous slurry of alumina in which the fundamental crystal size ranges from 50 to 100 nanometers. Utilizing the same abrasive platform as 9240 and 9245, Saint-Gobain optimized the chemistry for 9220 to provide a better dispersion property in applications where easy spraying is necessary, such as polishing specimen samples on bench top polishing machines.

Applications

Ceramics
C-plane sapphire
Ferrous metals
Aluminum
Other metals
View Complete Details

AmberCut

  • series 389R
  • Specific gravity, 20°C 1.06
  • pH (5% solution) 9.00
AmberCut 389R



High Purity Synthetic Coolant
AmberCut 389R is a completely synthetic, water soluble coolant formulated for high-tech manufacturing applications. Its unique formula contains very low levels of anion and cation contaminants such as chloride, sulfate, calcium and sodium, making it excellent for use in clean room environments. AmberCut 389R is specifically designed for coolant systems where minimal substrate contamination is critical. Additionally, AmberCut 389R combines a special corrosion protection package with a broad spectrum biocide to provide outstanding system protection. Recommended uses include cutting, slicing and grinding of ceramic materials, as well as the general machining of non-ferrous metals, plastics and composites.
Provides excellent lubrication for cutting, slicing and grinding
Contains
View Complete Details

AmberSlice

  • series 202A
AmberSlice 202A



Synthetic Slicing Grinding Coolant
AmberSlice 202A is a completely synthetic, water soluble coolant formulated for slicing and grinding. This unique formula contains very low levels of anion and cation contaminants such as chloride, fluoride, nitrate, phosphate, calcium, magnesium, sodium and potassium, making it excellent for use in highly technical applications. AmberSlice 202A also combines a special corrosion protection package with a broad spectrum biocide to provide outstanding system protection. Recommended uses include ID sawing and edge grinding of silicon wafers and other ceramic materials.
View Complete Details

Amtron

  • Specific gravity, 20°C 1.15
  • pH (concentrate) 1.2
Amtron OR5B



Aluminum Deox Solution
Amtron OR5B is a deoxidizing solution designed to remove the oxide layer from aluminum substrates. By removing the aluminum oxide layer before grindingpolishing processes, aluminum removal rates are significantly increased, and grinding stone life is extended. Amtron OR5B is completely biodegradable and contains no carcinogenic or toxic components.
FeaturesBenefits
Eliminates the difficult to grind oxide layer
Reduces grinding cycle times
Prevents rapid re-oxidation of the aluminum substrate
Does not contain hazardous solvents, nitrites, sulfur, chlorine, phenols, DEA, silicates or silicone
No irritating odor
Environmentally friendly
View Complete Details

FinAl Sapphire Polishing Slurry

  • Size 1.2u 0.75u 0.5u 0.35u
FinAl Sapphire Polishing Slurry



FinAl Sapphire Polishing Slurries Saint-Gobain Surface Conditioning
An innovative solution specially designed for polishing C-plane sapphire wafers, Saint-Gobain FinAl 9222 alumina polishing slurry combines optimal polishing performance with a lower total cost of ownership. While offering a superior removal rate thats at least four times greater than colloidal silica, FinAl 9222 slurry delivers a scratch-free finish with minimal subsurface damage and is capable of achieving less than 3 Angstrom Ra with no visible scratches to the naked eye.

Saint-Gobain Surface Conditioning's FinAl 9222 is an aqueous slurry that has been carefully designed, starting with the selection of high-purity raw materials to the final conversion of pre-cursor to alpha alumina. Ideal for cutting sapphire, FinAl 9222 slurry produces an excellent finish on C-plane sapphire.

Saint-Gobains new abrasive grain used for FinAl 9222 features a very hard nano-structured network that allows micro-fracturing and the formation of new, sharp cutting edges. FinAl 9222 polishing slurry may be used again and again in a recirculation mode for longer-lasting performance. In production scale testing with proper care and maintenance of the slurry in the mixing tank, FinAl 9222 recorded more than 10 hours of continuous polishing.

Saint-Gobain engineers and application specialists are available to demonstrate the proper use of FinAl slurry on C-plane sapphire to sustain a high material removal rate and long slurry life.
Benefits

Provides fast material removal rate and controlled surface finish
Easy to clean does not recrystallize like colloidal silica
Can be recycled to maximize slurry life
Readily available in commercial quantities
Tightly controlled particle size distribution and oversized particles
ISO certified for consistent quality
Knowledgeable application engineers available for technical support
View Complete Details

GaiN 200 CMP Slurry

GaiN 200 CMP Slurry



GaiN CMP Slurry Saint-Gobain Surface Conditioning
Specially designed to optimize the polishing process in the chemical mechanical planarization (CMP) of GaN wafers, Saint-Gobain Surface Conditioning's GaiN 200 is a patent-pending nano abrasive slurry that reduces overall processing time by more than half. Leveraging our extensive material platform and formulation expertise, Saint-Gobain engineered a slurry that combines high material removal rate (MRR) with an excellent surface finish in challenging GaN wafer polishing applications.

Saint-Gobain GaiN CMP slurry completely eliminates scratches and pitting across the entire surface of the wafer by lowering the surface roughness to less than 2 Angstroms as measured by Atomic Force Microscope (AFM). GaiN 200 achieves an EPI-ready surface on both 2-inch and 4-inch GaN wafers.

With an exceptional material removal rate, GaiN 200 CMP slurry is four times faster than competitive products and results in less damage to the sub-surface.

Benefits

Outstanding polishing speed
Excellent surface finish (
View Complete Details

Chemical Mechanical Planarization

  • Abrasive Alumina
  • CMP Applications Metal-Dielectric Sapphire GaN SiC
  • Benefits High removal Low surface finish Tunable selectivity Low defectivity Excellent planarization
Chemical Mechanical Planarization (CMP)

Chemical Mechanical Planarization (CMP) Polishing Applications Saint-Gobain
Optimal Polishing Performance for a Range of Substrates
Saint-Gobain Surface Conditioning is a leading developer of high-performance abrasive powders and slurries for chemical mechanical planarization (CMP) polishing applications. We offer a range of material compositions, morphologies and particle sizes for mechanical polishing coupled with chemical formulations to provide the highest removal rate and best surface topography on any material substrate.Through our state-of-the-art R&D center and application testing facilities, Saint- Gobain can simulate applications or work collaboratively with you to develop new CMP solutions that meet your specific process requirements.

CMP Polishing Slurries
Saint-Gobains CMP polishing slurries combine the unique properties of our abrasives technology with our chemical formulary expertise. These precision slurries are enabling for many technically challenging applications, including memory, sensor, HDD, MEMS, LED and power device fabrication.

Effective planarization of these surfaces requires high removal rates, excellent surface finish, low defectivity, tunable selectivities and high removal efficiency. Saint-Gobains alumina, diamond and zirconia particle technologies are key to achieving outstanding performance. Their unique properties, shapes and size distributions are methodically controlled to exacting quality specifications.

Complementing these abrasives is Saint-Gobains ability to engineer superior chemical attributes, such as particle dispersion, surface wetting, corrosion inhibition, material selectivities, uniformity and cleanability.
View Complete Details

AmberLube

  • series 85R9
  • Specific gravity, 20°C 1.11
  • Viscosity (20°C) 23 cp (Brookfield)
AmberLube 85R9



Waterless Lapping Lubricant
AmberLube 85R9 is a ready-to-use, waterless diamond lapping lubricant. It is specifically formulated for the fixed abrasive lapping of computer disk readwrite heads. The AmberLube 85R9 formula provides the unique ability to controle pole tip, alumina and RTS (reader to shield) recession or protusion. It also prevents ESD by quickly and effectively dissipating static charge buildup. AmberLube 85R9 imparts excellent surface finishes, improved removal rates and enhanced plate life. It does not contain water and is safe for use on GMR and advanced head designs. AmberLube 85R9 is easily cleaned with conventional polar solvents or water based cleaners.
Reduces pole tip and alumina recession to very low levels
Eliminates corrosion of exotic alloys
Prevents ESD by quickly dissipating static charge
Reduces RTS recession
Waterless and safe for use on GMR and advanced technology heads
Chemical properties enhance surface finish and extend plate life
Facilitates easy cleaning of parts
Enhances plate life
View Complete Details

AmberLube EC

  • Specific gravity, 20°C 1.06
  • pH (5% solution) 8.10
AmberLube EC



Biodegradable Aqueous Lubricant
AmberLube EC is a water-based lubricant which does not contain volatile organic compounds (VOCs) or ozone depleting substances (ODSs). This formula may be applied in the tube bending, swaging, stretch forming and skin forming of ferrous and non-ferrous metals such as aluminum, titanium and stainless steel. It also contains special anti-corrosive agents to protect form tools, dies, mandrels and bending tools from harmful oxidation. AmberLube ECs anti-wear lubricants reduce scratching, galling, and metal-to-metal contact.
Non-aggressive toward aluminum, ferrous and other space age metals
Does not contain oil, nitrites, sulfur, chlorine, phenols, DEA, glycol ethers, or any other hazardous solvents
Pleasant smelling and does not require ventilation
Biodegradable and poses no environmental or health risks
Will not degrade cleaning solutions as readily as traditional oil or solvent lubricants
Water-based formulation rinses easily
View Complete Details

AmberLube CK

  • Flash Point ~180°F (est. PMCC)
  • Specific gravity, 20°C 0.76
AmberLube CK



Waterless Lapping Lubricant
AmberLube CK is a lapping lubricant specifically formulated as a post lapping or crown lap lubricant for computer disk read-write heads. This unique formula is designed to provide maximum removal rate while imparting good surface finishes. AmberLube CK is capable of reducing pole-tip and aluminum oxide recession while eliminating corrosion of exotic alloys. AmberLube CK does not contain water and is safe for use on GMR and advanced design heads. It is easily cleaned with conventional polar solvents or water based cleaning solutions.
Provides maximum removal rate
Eliminates corrosion of exotic alloys
Chemical properties enhance surface finish and extend plate life
Prevents embedding of diamond and metal fines
Waterless and safe for use on GMR and advanced design heads
Facilitates easy cleaning of parts
Complements the use of AmberCut CK waterless slurries
View Complete Details

AmberLube EP

  • Specific gravity, 20°C 1.07
  • pH (5% solution) 8.50
AmberLube EP



Biodegradable Aqueous Lubricant
AmberLube EP is a water-based extreme pressure lubricant which does not contain volatile organic compounds (VOCs) or ozone depleting substances (ODSs). This formula may be applied in the tube bending, swaging, stretch forming and skin forming of ferrous and non-ferrous metals such as aluminum, titanium and stainless steel. It also contains special anti-corrosive agents to protect form tools, dies, mandrels and bending tools from harmful oxidation. AmberLube EPs anti-wear lubricants reduce scratching, galling, and metal-to-metal contact.
Non-aggressive toward aluminum, ferrous and other space age metals
Does not contain oil, nitrites, sulfur, chlorine, phenols, DEA, glycol ethers, or any other hazardous solvents
Pleasant smelling and does not require ventilation
Biodegradable and poses no environmental or health risks
Will not degrade cleaning solutions as readily as traditional oil or solvent lubricants
Water-based formulation rinses easily
View Complete Details

AmberGuard

  • Specific gravity, 20°C 1.18
  • Conductivity (2% solution) 3.5mS
AmberGuard CS1



Neutral pH Stabilizer and Silica Inhibitor
AmberGuard CS1 is a specifically formulated pH stabilizer designed to provide a neutral (pH 7.0) environment in low-ionic ceria slurries. This unique additive also provides protection against the precipitation and agglomeration of silica during glass and ceramic polishing.
FeaturesBenefits
Provides optimum environment for low-ionic or non-ionic aqueous solutions
Excellent protection against silica precipitation and agglomeration
Will not leave films or residues
Does not contain hazardous solvents (no VOCs or ODSs)
Biodegradable and poses no environmental or health risks
View Complete Details

Hard Disk Drive

Hard Disk Drive (HDD)



Innovative Organics Products for Hard Disk Drives Saint-Gobain Surface Conditioning
Specialty Chemicals and Slurries for Ultra-Smooth Surfaces
For more than 25 years, Saint-Gobain Surface Conditioning has assisted disk drive companies in squeezing data in ever-increasing quantities onto hard disk media with the development of precision abrasive slurries and specialty chemicals for critical surface finishing of disk media, recording heads and wafers.

Through our leadership in abrasive and chemical technology, Saint-Gobain continues to add to its broad spectrum of products for the Hard Disk Drive (HDD) industry by working with customers to develop products specifically engineered to meet your unique needs.

Engineering Solutions to Your HDD Challenges
At our hard disk grinding and polishing R&D facility in Anaheim, California, Saint-Gobain materials scientists and engineers are perfecting coolants, cleaners and slurries for demanding surface conditioning applications ranging from aluminum disk grinding to glass media polishing.

Our complete line of products for hard disk drive applications includes:

Heat-treated mono and polycrystalline diamond slurries for slider bar lap
Thermally treated monocrystalline diamond and polycrystalline diamond slurries for charging eutectic lapping plates (metal alloys such as SnSb and SnBi)
Patented oil-based non-conductive lubricants for critical final lapping
Ultra-pure cleaners for all in-process and post-process requirements
Corrosion inhibitors to provide protection against the oxidation and corrosion of reactive metals such as cobalt, manganese, copper, nickel and iron
CMP slurries for planarization and polishing of wafer devices and overcoat
View Complete Details

Natural Diamond Mesh

  • ABC Superabrasives Mesh Brand Natural Blocky: 16 / 18 to 50 / 60 Natural Blocky: 60 / 70 to 325 / 400 Natural Blocky: 400 / 500 to 500 / 600
Natural Diamond Mesh



Saint-Gobain Surface Conditioning's natural diamond is crushed and processed from boart, a diamond type unsuitable for gemology. This diamond tends to be free of inclusions and cracks, and is mechanically strong with high thermal stability. Natural diamond can contain less metal impurities, making it useful in the manufacture of sintered and electroplated metal bond tools.

Saint-Gobain natural diamond mesh features strong single crystals that are blocky in shape, with an impact strength typically less than metal bond diamond and greater than resin bond diamond. Its ideal for gemstone polishing and lappinggrinding of carbide metals, ball bearings and glass.
View Complete Details

Natural Diamond Micron

  • Warren Micron Brand Natural Blocky: 16 / 18 to 50 / 60 Natural Blocky: 60 / 70 to 325 / 400 Natural Blocky: 400 / 500 to 500 / 600
Natural Diamond Micron

Warren Superabrasives Saint-Gobain Surface Conditioning

Saint-Gobain Surface Conditioning's natural diamond micron combines mechanical strength with high thermal stability. Crushed and processed from boart, natural diamond micron is typically free of cracks and inclusions and contains less metal impurities.

Available in sizes ranging from 0-1 micron to 40-60 micron, Saint-Gobain natural diamond micron is processed using state-of-the-art grading equipment to ensure well-controlled particle size distribution and surface cleanliness in your most demanding applications. Its ideal for gemstone polishing and lapping.
View Complete Details

Cubic Boron Nitride Mesh

  • Cubic Boron Nitride Mesh Brand CBN-A (60 / 80 to 325 / 400) CBN-A Ni60% (60 / 80 to 325 / 400) CBN-A90 (40 / 50 & 50 / 60)
Cubic Boron Nitride Mesh



Cubic boron nitride is a synthetic crystalline material second only to diamond in Knoop hardness. Although softer than diamond, CBN is superior in terms of abrasion resistance and oxidation resistance with steel alloys. Its relative crystalline inertness makes CBN the abrasive of choice for grinding steels, cast iron and nickel-based alloys.

Saint-Gobains cubic boron nitride mesh is typically 40m and larger in particle size and available in an electroless nickel (Ni) coating of 60% by weight. Our electroless coated particles promote enhanced grinding wheel performance in terms of longevity due to improved heat removal from the grinding zone and increased abrasive adhesion in the bond system.

Applications

Metal bond grinding wheels
Resin bond grinding wheels
Vitrified bond wheels
Electroplated products
View Complete Details

Cubic Boron Nitride Micron

  • Cubic Boron Nitride Micron Brand CBN-B1 Micron - Black crystal, common micron sizes CBN-B80 Micron - Black crystal common micron sizes
Cubic Boron Nitride Micron



Cubic boron nitride is a synthetic crystalline material second only to diamond in Knoop hardness. Although softer than diamond, CBN is superior in terms of abrasion resistance and oxidation resistance with steel alloys. Its relative crystalline inertness makes CBN the abrasive of choice for grinding steels, cast iron and nickel-based alloys.

Saint-Gobain Surface Conditioning's cubic boron nitride micron is designed for fine grinding and polishing in a variety of demanding surface finishing applications. The micron particles are graded to create a highly consistent PSD, with surface treatment and coatings to match the chosen bond technology.

Applications

Metal bond grinding wheels
Resin bond grinding wheels
Vitrified bond wheels
Electroplated products
View Complete Details

Polycrystalline Micron Diamond

  • Warren Micron Brand Type 1 (0.1 to 8 - 12µm) Type 2 (0.1 to 6 - 12µm)
Polycrystalline Micron Diamond

Warren Superabrasives Saint-Gobain Surface Conditioning

Saint-Gobain Surface Conditioning's polycrystalline micron diamond is produced in a controlled explosion known as shock synthesis. The resulting grains feature a very rough surface morphology.

Our polycrystalline micron diamond maximizes productivity in lapping and polishing processes across a wide range of applications. We offer three polycrystalline types with varying shapes and properties designed to meet demanding surface finishing requirements in a variety of industries.

Applications:

Compound semiconductor wafers (II-Vi & III-Vs)

Sapphire, silicon carbide, gallium nitride

Ceramics

HDD components recording heads

Laser crystals YIG, YAG

Optical and electro-optical crystals lithium niobate and other oxide crystals

Hard brittle materials

Carbides
View Complete Details

E-Powders

  • series E266, E300, E330, E390, E440, E500, E600
E-Powders

Saint-Gobain Surface Conditioning's E-Powders are calcined aluminum oxide powders offering proven performance in a variety of demanding abrasive, thermal and structural applications.

Originally designed as functional filler in magnetic media for continuous cleaning of magnetic heads with reduced dropout, our E-Powders are also ideal for use in applications ranging from automotive polishing to semiconductor CMP.

Available in a wide selection of shapes and sizes, Saint-Gobain alumina E-powders feature controlled size distributions and high purity levels for optimal performance.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Saint-Gobain Grains & Powders, Inc)
  • Anaheim, CA 92807-2058 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/saint-gobain-grains-powders-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457984{main}( ).../index.php:0
20.01562139048include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02422861736include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.02963797440header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice