Saint-Gobain Performance Plastics, Tygon Silicone Products

• Tensile Strength @ 200% Elongation., psi (mpa)1800
• Brittleness Temp. °F (°C)-51

Peristaltic Pump Tubing for Food and Beverage Dispensing Crystal-clear Tygon S3 E-LFL tubing is formulated specifically for use in peristaltic pump applications. The new Tygon S3 E-LFL non-DEHP tubing has even longer pump life not only at 0 bar but also at back pressure of up to 1.7 bar. The peristaltic pump life performance at different back pressures is shown on the second page of the Tygon S3 E-LFL product datasheet. With its superior flex life characteristics, Tygon S3 E-LFL tubing reduces production downtime due to pump tubing failure. Datasheet

• Tensile Set. %300
• Ultimate Elongation850

In the world of chemical transfer, chemical compatibility and flexibility are the two most important performance criteria to ensure optimization of the performance. Tygon 2375-C tubing is specially engineered to deliver just that outstanding performance in an environment where harsh chemicals are used in either industrial or institutional cleaning applications to ensure sanitation and hygiene safety. To assure our customers whose application will be using tubing to transfer chemicals used for final products that require FDA approval, Tygon 2375-C tubing brings you that assurance due to its compliance with FDA 21 CFR 177.1520.

• Specific Gravity1.26
• Tear Resistance Ib-f/in (kN/m)167

High Performance Fuel and Lubricant Tubing for Small Engines Specifically designed to handle most fuels and industrial lubricants, Tygon® Fuel and Lubricant Tubing resists the swelling and hardening caused by hydrocarbon-based fluids. This significantly reduces the risk of failure due to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against adulteration. Because it is extremely flexible, Tygon® Fuel and Lubricant Tubing simplifies installation, even in tight places. It is translucent yellow for positive identification and to allow easy flow monitoring. It is routinely used to handle gasoline, kerosene, heating oils, cutting compounds and glycol-based coolants.

• Brittleness Temp. °F (°C)-112
• Maximum Recommended Operating Temp. °F (°C)100

Tygon® II is manufactured in a climate-controlled environment and is produced from the highest quality silicone on the market. Because of its curing mechanism, the final product’s consistency is very high, andit is more translucent and less tacky than other silicone products on the market. Tygon® II tubing does not contain plasticizers or other additives and by products that can leach into the milk and cause toxicological issues. It is highly flexible, resistant to kinking and tearing.

• Brittleness Temp. °F (°C)-130
• Specific Gravity1.27

Clear, High-Performance Fuel Tubing for Small Engines Tygon® LP-1200 Low Permeation Fuel Tubing is specially designed to meet new evaporative emission standards of 15gm²day. The patent-pending design and robust multi-layer construction offers superior fitting retention and resistance to swelling, hardening and cracking caused by hydrocarbon-based fluids. Available in both standard and custom sizes and colors, Tygon® LP-1200 tubing is ideal for lawn and garden power equipment, small engine fuel lines, and lubricating oil and grease transfer lines.