Nanjing, United States
Write a Review
Welcome to Sales Director
Henergy Solar is one old brand PV factory founded in 2008. Henergy Solar has built a vertically integrated solar product value chain, with an overall annual capacity of approximately 8GW of Solar Cells and 6GW of solar panels. The company has a.. Read More
Sales Director
Antonio Xiao
Year of Establishment
2008
Primary Business
Manufacturer
Annual Turnover
Above USD 1 Billion Approx.
【Product name】 M10 182mm 16BB N type Topcon Solar Cells 【Product model】 HSSC182MTB16 【Product description】 Geometry Characteristics： Product model:182 mono-crystalline Bifacial solar cell Geometry：182.2mmx182.2mm±0.5mm, Φ 247.28mm±0.5mm Cell thickness:130μm±13μm Front design：16 busbars, 12 pads, 132 fingers, busbar width 0.036±0.02mm Rear design：16 busbars, 12 pads, 134 fingers, busbar width 0.036±0.02mm Product Characteristics： High efficiency, Eta≥24.5% Bifacial rate up to 80% Light-induced Degradation is "0" Superior anti-PID performance Temperature coefficient of Power as low as -0.32%/K Relative conversion efficiency≥97% under low light(200W/m2) Lower Cell to Module (CTM) Loss Rate, more suitable for high- efficiency module Quality Control： The accuracy of the efficiency test is controlled within ±0.1% Electrical performance, appearance, EL 100% automatic inspection Calibration cells are traceable to Fraunhofer ISE Temperature Coefficients： TkCurrent： 0.045%/K‘ TkVoltage：−0.25%/K TkPower：-0.32 %/K
【Product name】 G12 15bb HJT Mono Crystalline Solar Cells 【Product model】 HS-15BB-G12-252 【Product description】 HJT Solar cell is a new generation superior bifacial solar cell model made out of N-type wafer, which combines merits of crystalline silicon and thin film technology to form single composite structure. As one of most effective cell passivation technology in the market. HJT ensures solar cells deliver high efficiency and great power even in hot climate. Higher Cell Efficiency Phosphorus fettering combines with nano-crystalline process to guarantee higher cell efficiency. Ultra-low temperature coefficiency ensures more power output in high temperature environment. No LID, No PID, lead to zero degradation. Maximum Module Power 15 Busbar Technology combines half-cell design to deliver high energy output for maximum cost savings Bifacial constructure ensures more sunlight captured and converted into power on back side. Extreme low LID and PID supports reliability and longevity. Low LCOE cost by HJT solar system
【Product name】 700W-720W HJT 210mm 132-cells Bifacial Half Cell Double-glass Mono Crystalline Solar Modules 【Product model】 HS-HJT-DS600 【Product description】 HJT Technology Combining gettering process and μc-Si technology to ensure higher cell efficiency and higher module power. -0.24%/C Pmax temperature coefficient More stable power generation performance and even better in hot clmate, SMBB design with Half-Cut Technology Shorter current transmission distance, less resistive loss and higher cell etficiency. Up to 90% Bifaciality Natrual symmetrical bifacial structure bringing more energy yield from the backside. Sealing with PIB based sealant Stronger water resistance, greater air impermeability to extent module lifespan, Higher reliability Industrial leading product and performance warranty, ensuring modules' consistent outstanding performance. Suitable for Utility project Lower BOS cost, lower LCOE. WARRANTY Product Warranty15 years Linear Power Warranty30 years
【Product name】 182mm P-Type Mono Bifacial Solar Cell 【Product model】 HSC182-10D10B 【Product description】 Product Feature High conversion efficiency ≥ 23.3% Bifaciality ≥70% LID (Light Induced Degradation) ≤2.5% High resistance of PID (Potential Induced Degradation) Power temperature coefficient ≤-0.35%/K Weak light response (200W/m²) ≥95% Lower CTM loss, better for the high efficiency module Quality Control Efficiency test accuracy is ±0.1% 100% automatic inspection of IV/EL/Appearance Calibration Cell soure to Fraunhofer ISE Management System Certification ISO 9001:2015 Quality Management System ISO 14001:2015 Environmental Management System ISO 45001:2018 Occupational Health and Safety Management System
【Product name】 675W-700W N-type Topcon 210mm Dual Glass Bifacial Monocrystalline Solar Modules 【Product model】 HS-NSPT700 【Product description】 High customer value •The star of LCOE (Levelized Cost Of Energy) . Higher string power feature effectively reduces BOS (Balance of System) and LCOE •More energy harvest with cutting-edge N-type i-TOPCon technology •Designed for compatibility with existing mainstream system components High power up to 700W •Up to 22.5% module efficiency with high density interconnect technology •SMBB (Super multi-busbar) technology for better light trapping effect, lower series resistance and improved current collection High reliability •Minimized micro-cracks with innovative non-destructive cutting technology •Ensured PID resistance through cell process and module material control •Resistant to harsh environments such as salt, ammonia, sand, high temperature and high humidity areas •Mechanical performance up to 5400 Pa positive load and 2400 Pa negative load High energy yield •Excellent product bifaciality and low irradiation performance, validated by 3rd party •Lower degradation: 1% first year, 0.4% annually thereafter •Lower temperature coefficient (-0.30%) •Up to 30% additional power gain from back side depending on albedo
Share your thoughts with other customers for Sales Director
Add Review
Antonio Xiao (Sales Director)No. 219, Lantian Road, Lukou Street, Nanjing - 320115, United States
Share us via
