Manufacturer / Exporter / Supplier Of Larger Draw Curtain Machines, DRAW CURTAIN MACHINES, Hercules Machines, Tom Thumb Machine, aluminum motorized track system, Hercules
Year of Establishment
1981
Primary Business
Supplier
Number of Employees
10-49
Specifically designed for projects requiring curtain machines which can fit in narrow pockets, these machines are capable of operating acoustic curtain track systems up to 75’ in length (layout dependant) and curtains weighing up to 500 pounds. The control box for these machines is provided either separately, tethered to the machine with 6’ of flexible conduit, or mounted to the machine base. Operation is stopstartreverse from any point of travel. OUTSTANDING FEATURES: N-GROOVE WHEEL DRIVE Machined with double N-grooves, the drive wheel when used in conjunction with the machine’s idler wheels and center tension wheel, provides a near slip-free operation.CONTROL SWITCHES Three-button type marked Open, Close and Stop. Any number of remote control stations can be used with this model machine. Machine is supplied with a set of controls on the control box and a set to be used as remote control station. CONTROL BOX Supplied either tethered, but not mounted to the machine for placement up to 6’ away on an adjacent wall, or rigidly mounted to the machine’s base. Tethered control boxes allow you to locate the control box in a readily accessible area when the machine is located in a pocket or inaccessible area. This makes maintenance and troubleshooting easier in the field. If accessibility is not an issue, opt for the models with the control box rigidly mounted to the machine’s base. LIMIT SWITCHES Track mounted limit switches are used to provide positive and accurate stops. Two limits are provided with the machine. Limit switch voltage is 24 VAC. Master carrier with tripping dog included. MANUAL OVERRIDE The machine is provided with a driving dog which allows the user to disengage the drive wheel in the event of a power failure and easily operate the system manually. When power is restored the driving dog is simply re-engaged. Since this model machine utilizes track mounted limit switches, the limit positions will not be affected by the re-engagement position of the drive wheel.
MOTO-TRAC ® is an aluminum motorized track system for straight layouts of light to medium weight draperies. The track can be one-way draw or bi-parting. This system can provide an unlimited amount of center overlap if it is specified as such when ordering. Standard overlap is 12" (6" in front of 6" at the center overlap). The machine operator for this track system is attached directly to one end of the track channel (location must be specified when ordering) and is supported by an overhead structure directly above the machine. The machine is concealed by the drapery fabric via a tie-off point for the last pleat or grommet of the curtain. The curtain machine specifications are similar to those of the Tom Thumb® Model 872-MCS except that the limit switches are direct strike and are located at on the machine. The curtain stops automatically at its fully opened and fully closed positions. This track system cannot be suspended, it must be directly mounted to an overhead structure. Maximum curtain weight for this system is 75 pounds. When determining the side of the track system the motor is located when ordering (left or right), the view is standing in the room looking out the window with the track attached above the window.
934, 1454, 2904, 6504 Autodrape®, Silver Service®, Hercules® Machines Models 934, 1454, 2904 and 6504 are the most versatile yet most reasonably priced stop, start and reverse machines available anywhere. Designed particularly for multiple remote control station locations, these units include a magnetic reversing contactor and three-button control stations (24 vac). Integral rotary limit switches provide user defined pre-set stops for the "Full Close" and "Full Open" positions. These machines are also obtainable with magnetic friction brakes that help provide more precise stopping. Model number differences are based on horsepower of motors; 14, 13, 12, 34. Standard unit is equipped with: Rotary Limit Switches for full open and full closed positions. Low Voltage Control - 24 VAC Remote Control Station (RCS-1) 24 VAC Class 2 low voltage control circuit Machine Guard Helical Grooved Drum 5"L x 10"D Channel Steel Base Connects to 120 volt power supply (220 volt single phase and 230 volt, 3-phase available as an options) ETL Listing for entire machine, not just control panel Approximate shipping weight 165 pounds SPECIFICATIONS: Curtain machines shall be fully automatic type with ... HP motor connected through V-belt drive to gear unit, on the output drive shaft of which shall be mounted elevator-type grooved cable drum delivering a cable speed of 86 feet per minute equivalent to curtain separation speed of 3 feet per second. Mechanism shall include magnetic contactor to provide reversing action at any point along the travel and shall include three-button control switch stations mounted on unit and one for remote control. Control switch wiring shall be accomplished through low voltage (24 vac) system running from the machine's control box to the remote control switch station. Limit switch assembly shall be mounted integrally with gear unit. Safety guard shall be provided over V-belt drive and limit switch chain drive. Machine shall be equipped with disconnect switch, automatic overload protective breaker, and emergency hand crank for conversion to manual operation unless equipped with cable tension device. The entire mechanism shall be mounted on steel base. The entire mechanism shall be UL or ETL listed. Model ... as manufactured by Automatic Devices Company of Allentown, PA.
The Model 579 was designed as a versatile and economical solution for small residential and light commercial drapery track applications. Small in size and big in features, the Model 579 can operate tracks up to 20' in length and curtain weights up to 60 pounds. Track mounted limit switches provide positive end of travel signals and allow for a moderate amount of cable slippage. This machine also includes a built in timer to ensure that the machine will shut off even if the cord slips or breaks during operation. Incorporating features such as variable speed, user definable maximum and minimum speed settings and optional wireless remote control makes this one of the most versatile drapery operators on the market today. Fixed cable speed of 30 fpm. UL Listed Approximate shipping weight: 20 pounds SPECIFICATIONS: Curtain machines shall be fully automatic type equipped with 18 watt motor and built-in gear reduction unit on the output drive shaft of which shall be mounted an N-grooved traction wheel delivering a variable cable speed of 0 to 40 feet per minute equivalent to curtain separation speed of 0 to 1.5 feet per second. Mechanism shall include a hardwired low voltage remote control station of three-button type which shall provide reversing action at any point along the travel. Machine shall be equipped with ball-bearing idler wheels, automatic overload protective fuse, automatic shut off after predefined period, and magnetic track mounted limit switches. The mechanism shall be furnished with a mounting bracket designed for floor, wall or ceiling mounting. Model 579 as manufactured by Automatic Devices Company of Allentown, PA.
Hercules ® Model 9507TV is the most powerful lift machine of the the ADC line. Equipped with electronic frequency drive control, this machine provides versatility and protection for the most demanding lift applications. The 9507TV machine offers a multitude of parameters that can be programmed in the field to meet almost any project requirement speed, maximum obtainable speed, acceleration ramp time and deceleration ramp time are easily changed right at the drive. The machine is also equipped with deceleration limit switches which allow the machine to gradually decelerate to a stop, dissipating inertial energy rather than abruptly stopping at the end of its travel. The machine does feature emergency overtravel limit switches and fast stop push buttons which bypass the deceleration ramp and shut the machine off immediately in the event of a problem during operation. The operation of these machines is StartStopReverseFast-Stop from any point of travel and low voltage controls is standard (some machines also require a remote reset button at the remote control station). If versatility and power are a requirement, the Model 9507TV is an excellent choice. Standard unit is equipped with: Lift capacity 1200 pounds Rotary Limit Switches for decelerate to full open and declelerate to full closed positions as well as immediate stop over travel limits for the open and close directions. Low Voltage Control - 24 vac Remote Control Station (RCS1-TV) Fast stop (F-Stop) loop and pushbutton which provides instaneous stop of the machine, bypassing the deceleration ramps. Variable speed operation from 0 to 54 fpm Machine Guard Helical Grooved Drum 14"L x 6"D Provides up to 55' of travel Channel Steel Base Connects to 230 volt, 3-phase power sources (208 volt , 3-phase is available as an option). ETL Listing on the entire machine, not just the control box Approximate shipping weight 350 pounds Lift machine shall be fully automatic type equipped with 5 HP motor, with magnetic friction brake, right angle gear reducer on the output drive shaft of which shall be mounted elevator-type grooved cable drum and outboard bearing to support and align extended shaft. Drum shall deliver a variable cable speed of 0 to 54 feet per minute. Machine shall be direct drive with no couplings, belts, or chains on the drive section of the machine. Brakemotor shall be mounted directly to the gear reduction unit which shall incorporate a single solid steel shaft on its output to which the grooved steel drum shall be affixed. The solid steel shaft shall be supported by the gear reduction unit on one end and a flange bearing on its remaining end. Mechanism shall include an electronic frequency drive to provide variable speed and reversing action at any point along the travel and shall include four-button control station (five button if reset is required) mounted on unit and one for use as a remote control. Control switch wiring shall be accomplished through a low voltage system running from the control box on the machine to the remote control station. Integral rotary limit switches shall be driven from output shaft of gear reduction unit. Machine shall be equipped with overload protective and electronic frequency drive protection. The entire mechanism shall be mounted on heavy steel base. Model 9507TV as manufactured by Automatic Devices Company of Allentown, PA.
2905, 6505, 7005 Machines Models 2905, 6505 and 7005 combine versatility with the power and drum capacity needed to operate larger than normal draw curtains. Designed for multiple remote locations and connection to automation systems, these units include a magnetic control system, three-button control switches, and limit switches for the "Full Close" and "Full Open" positions. A Cable Tension Device is included as standard equipment. A magnetic brake, for instantaneous stopping, is available as an option. Model differences are based on horsepower of motor used. Configuration and size is the same for all models. Standard unit is equipped with: Cable Tension Device (CTD) Rotary Limit Switches for full open and full closed positions. Low Voltage Control - 24 vac Remote Control Station (RCS-1) Machine Guard Helical Grooved Drum 12"L x 8"D Channel Steel Base Connects to 120 volt power supply (230 volt, 3-phase or 220volt, single phase is available as an option) ETL Listing for entire machine, not just control box Approximate shipping weight 230 pounds Curtain machines shall be fully automatic type equipped with ... HP motor connected to gear unit, on the output drive shaft of which shall be mounted elevator-type grooved aluminum cable drum and outboard bearing to support and align extended shaft. Cable tension device shall be provided to help automatically remove slack from cable and retain cable within drum grooves. Drum shall deliver a cable speed of 72 feet per minute. Mechanism shall include magnetic contactor to provide reversing action at any point along the travel and shall include three-button control switch mounted on unit and one for remote control. Control switch wiring shall be accomplished through low voltage system running from control switch on the machine to the remote control switch station. Limit switch shall be driven from output drive shaft of gear reduction unit. Machine shall be equipped with disconnect switch, overload protective breaker and emergency hand crank for conversion to hand operation. The entire mechanism shall be mounted on heavy steel base. Model ... as manufactured by Automatic Devices Company of Allentown, PA.
Share your thoughts with other customers for Sapsis Rigging, Inc .
Add Review
