Other Products / Services

The strip chart panel allows a user to monitor the amplitude of a selected signal and display the amplitude on an amplitude vs. time strip chart. The user can then recall the data for analysis.

SENDS EMAILs to your PC or Phone STARTS Event triggered recording The alarm panel offers two alarm solutions, waveform mask (represented above) and the high low limits option. The waveform mask option allows a user to select an exact envelope of concern around the signal of interest. The user can adjust and select the desired sensitivity by selecting and manipulating the +- Alarm Limits control variable. Selecting a smaller or larger number will affect the monitor area around the signal. The high low alarm function allows a user to select a box area to monitor. With either alarm scenario the alarm will activate the alarm visual indicators and if the user has selected the option will then either start a recording or send an email notification based on the criteria determined by the user

Standard analyzer mode only show a changing snapshot of the current signal RF energy, waterfall shows a scrolling spectrogram, a 2-d plot of frequency vs time. Waterfall plots are a convenient way of viewing a time history of your data. Each successive measurement record is plotted along the z-axis making it easy to see trends in the data.

Allows the user to save and recall template Mask for easy signal comparison & verification.Allows the user to save and recall template Mask for easy signal comparison & verification.

Allows the user to define multiple setups of IP location, RF switch inputs, center frequency, reference level, span width etc This is an excellent tool for monitoring both multiple locations (Remote Carrier Monitors locations) and multiple RF inputs and center frequencies setups automatically. Allows up to 25 IP locations and or user defined setups.

he Model DRSM-2500D is the ideal solution for accurate local or remote monitoring of carriers from 1 MHz to 2500 MHz. The DRSM-2500Ds 5.7 TFT touch screen display makes local monitoring of RF signals easy. Your Engineer or Technician can quickly monitor or troubleshoot a problem locally. With just a push of a button, the DRSM-2500D can be switched to remote TCPIP connection and be monitored and controlled in real time from a remote location on your local network by using a standard PC and the DTI Graphical User Interface. The DTI Graphical User Interface is plug and play. The Ethernet RJ-45 port provides a network connection to your companys LANWAN or other IP network resource. The DRSM-2500D is an extremely flexible and cost-effective way to network-enable one or many DRSM-2500D units and remotely monitor them from a central location.
Features & Benefits

Tuning and sweep accuracy w DIGISWEEP
Increased input sensitivity!
Center frequency tuning
Multiple input options
Spurious Frequency Offset
6 resolution bandwidths 3 MHz to 1 kHz
Variable data point resolution
Variable reference levels
Variable span width
Variable sweep rate Single sweep mode*
Video Bandwidth Filtering