Product / Services
Post Buy Requirement
SC
SCS
United States
Add Review
Call Now

Our Products

  1. Laces, Interlinings & Other Accessories 24 Products available
  2. Sealing & Strapping Machines 4 Products available
  3. Antenna 5 Products available
  4. Floor Mats 11 Products available
  5. Rubber & Rubber Products 3 Products available
  6. PVC, PP & Plastic Products 13 Products available
  7. Barrier Bags 90 Products available
  8. Winter Jackets 20 Products available
  9. Sensors 5 Products available
  10. Wrist Bands 16 Products available
  11. Others 155 Products available

Other Products / Services #5190102

773 - Wrist Strap and Ground Monitor

773 - Wrist Strap And Ground Monitor

  • Series 773
Operator and Equipment Ground Continuous MonitorContinuously monitors the path-to-ground integrity of two operators and two metal tools; meets ANSIESD S20.20 in accordance with ESD TR1.0-01-01Operator Body Voltage DetectionAlarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible itemDigital Signal Processing TechnologyApplies a low test voltage to the operator (0.10V) for the handling of sensitive componentsMiniature Size (0.85 H x 2.4 W x 2.6 L)Uses minimal workspace and includes mounting tabs for installation underneath table topsUse with Dual-Wire Wrist StrapsSee SCS Dual-Wire Wrist StrapsReplaceable Dual-Wire Operator JackUse the CTA252 Replacement Jack PCB to easily replace the operator jack without the use of solderCalibration Unit Available for Accurate Performance and Conformity Testing in the FieldSee SCS item CTE701NIST Calibrated with Certificate IncludedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration.100-240VAC Power Adapter with Interchangeable PlugsWorks with standard electrical systems in North America, United Kingdom, Japan, Asia and EuropeAssembled in the United States of America with Globally Sourced MaterialsThis item is assembled and stocked in Chino, CA
View Complete Details
Ask Latest Price & Details
CTC065-RT-WW - GROUND MASTER

CTC065-RT-WW - GROUND MASTER

  • Series CTC065-RT-WW
The Ground Master Equipment Ground Monitor can be used to monitor the ground impedance of metal ground connections of process tools in work areas including, but not limited to semiconductor, disk drive, flat panel, and electronic equipment manufacturing environments.
View Complete Details
Ask Latest Price & Details
CTC065-RT-T - GROUND MASTER

CTC065-RT-T - GROUND MASTER

  • Series CTC065-RT-T
CTC065-RT-T - GROUND MASTER, RELAY OUT, NO POWER ADAPTERThe Ground Master Equipment Ground Monitor can be used to monitor the ground impedance of metal ground connections of process tools in work areas including, but not limited to semiconductor, disk drive, flat panel, and electronic equipment manufacturing environments.
View Complete Details
Ask Latest Price & Details
CTC065-C - GROUND MASTER EXTENSION CABLE UNIT

CTC065-C - GROUND MASTER EXTENSION CABLE UNIT

  • Series CTC065-C
Use to extend the 8 equipment terminals located at the bottom of the Ground Master Equipment Ground MonitorExtension cable length: 6.5 ft (2 m)To be used with the following items:CTC065-5-WW
View Complete Details
Ask Latest Price & Details
733 - Dual Conductor Remote

733 - Dual Conductor Remote

  • Series 733
Operator remote splitter kit for 724 Workstation MonitorAdds the ability to monitor a second operator at a nearby independent workstationEasy-to-install housing; mounting hardware includedMounts easily to most machinery and work areasThis item is stocked in Chino, CA
View Complete Details
Ask Latest Price & Details
3HIC125 - Humidity Card

3HIC125 - Humidity Card

  • Series 3HIC125
3HIC125 - Humidity Card, 3-Spot, 125CanMeasures the level of relative humidity that the contents of the packaging have been exposed toComplies with MS 20003-2, and MIL-P-116For use with Moisture Barrier BagsUse Desiccant to provide protection for moisture sensitive items such as surface mount devicesLead-Free RoHS 2 CompliantCards can be shipped with RoHS 2 compliant productsPre-punched holes on top and bottom125 cards per canConvenient container to protect and store cardsMade in the United States of America
View Complete Details
Ask Latest Price & Details
4HIC100 - Humidity Card

4HIC100 - Humidity Card

  • Series 4HIC100
4HIC100 - Humidity Card, 4-Spot, 100CanMeasures the level of relative humidity that the contents of the packaging have been exposed toComplies with EIA 581, MIL-P-116, and MIL-I-8835For use with Moisture Barrier BagsUse Desiccant to provide protection for moisture sensitive items such as surface mount devicesLead-Free RoHS 2 CompliantCards can be shipped with RoHS 2 compliant productsPre-punched holes on top and bottom100 cards per canConvenient container to protect and store cardsMade in the United States of America
View Complete Details
Ask Latest Price & Details
6HIC200 - Humidity Card

6HIC200 - Humidity Card

  • Series 6HIC200
6HIC200 - Humidity Card, 6-Spot, 200CanMeasures the level of relative humidity that the contents of the packaging have been exposed toComplies with EIA 581, MIL-P-116, and MIL-I-8835For use with Moisture Barrier BagsUse Desiccant to provide protection for moisture sensitive items such as surface mount devicesLead-Free RoHS 2 CompliantCards can be shipped with RoHS 2 compliant productsPre-punched holes on top and bottom200 cards per canConvenient container to protect and store cardsMade in the United States of America
View Complete Details
Ask Latest Price & Details
51015HIC125 - Humidity Card

51015HIC125 - Humidity Card

  • Series 51015HIC125
51015HIC125 - Humidity Card, 5-10-15%, 125CanMeasures the level of relative humidity that the contents of the packaging have been exposed toFor use with Moisture Barrier BagsUse Desiccant to provide protection for moisture sensitive items such as surface mount devicesLead-Free RoHS 2 CompliantCards can be shipped with RoHS 2 compliant productsPre-punched holes on top and bottom125 cards per canConvenient container to protect and store cardsMade in the United States of America
View Complete Details
Ask Latest Price & Details
51060HIC125 - Humidity Card

51060HIC125 - Humidity Card

  • Series 51060HIC125
51060HIC125 - Humidity Card, 5-10-60%, 125CanMeasures the level of relative humidity that the contents of the packaging have been exposed toComplies with IPCJEDEC J-STD-033CFor use with Moisture Barrier BagsUse Desiccant to provide protection for moisture sensitive items such as surface mount devicesLead-Free RoHS 2 CompliantCards can be shipped with RoHS 2 compliant productsPre-punched holes on top and bottom125 cards per canConvenient container to protect and store cardsMade in the United States of America
View Complete Details
Ask Latest Price & Details
CTM051 - Ground Pro Meter

CTM051 - Ground Pro Meter

  • Series CTM051
Verifies Critical Grounding Parameters of a FacilityMeasures AC voltage, DC voltage, EMI voltage and AC impedanceProvides Accurate Measurements of Ground Impedance on a Working ToolMeets ANSIESD S20.20 requirements for AC impedanceIdentifies Potential EOS GeneratorsMeasures maximum millivolt requirement of IPC-A-610Auto-Zero Function for Test LeadsFactors out the impedance of the test leads for improved measurement accuracyProgrammable Impedance AlarmAudible alarm sounds when impedance measurement is below threshold set by operatorNIST Calibrated with Certificate IncludedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration.Assembled in the United States of America with Globally Sourced MaterialsThis item is assembled and stocked in Chino, CA
View Complete Details
Ask Latest Price & Details
701 - Analog Surface Resistance Megohmmeter Kit

701 - Analog Surface Resistance Megohmmeter Kit

  • Series 701
Lightweight, user-friendly Analog Surface Resistance MegohmmeterTwo different test scales and settings for testing both surface-to-ground (Rtg) and surface-to-surface (Rtt) resistanceColor-coded number scales help identify ideal resistance rangesKit contains:1 Megohmmeter2 Test Weights (5 lbs. each)2 Test Leads (10 ft. each)1 Insulated Bulldog Clip1 Alligator Clip1 Continuity Test Plate2 Batteries (3.6V and 1.5V)1 User Guide1 Molded Carrying CaseETL and CE ListedNIST CalibratedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, click here.
View Complete Details
Ask Latest Price & Details
CTM082 - ESD Pro - ESD Event Indicator

CTM082 - ESD Pro - ESD Event Indicator

  • Series CTM082
ESD Event IndicatorDetects and counts ESD events for control program troubleshooting and improvement.Ten LED DisplayShows the relative strength of the ESD event.Adjustable Alarm ThresholdUse the rotary switch to set the strength for which the ESD event must meet in order to be counted.Four-Digit Counter Displays the number of ESD events that occurred at or above the alarm threshold.CDM Filter SwitchFilters and rejects EMI signals that are not caused by Charged Device Model discharges.Portable Operation with 9 Volt BatteryNo charging or sourcing of special batteries needed.Assembled in the United States of America with Globally Sourced MaterialsThis item is assembled and stocked in Chino, CA.
View Complete Details
Ask Latest Price & Details
CTM048-21 - EM Eye - ESD Event Meter

CTM048-21 - EM Eye - ESD Event Meter

  • Series CTM048-21
Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errorsCalculates event magnitude for Charged Device Model (CDM), Human Body Model (HBM) and Machine Model (MM)Records all measurements to a microSD card for PC downloadTouchscreen display provides intuitive user interfaceRechargeable lithium ion batteryAssembled in the United States of America with Globally Sourced Materials U.S. Patents 6, 563, 319; 6, 762, 607; 7, 525, 316; 7, 795, 875
View Complete Details
Ask Latest Price & Details
751 ESD Audit Kit

751 ESD Audit Kit

  • Series 751
EOSESD Audit Kits offer companies an effective way to detect ESD events and help prevent component failures. These tools help allow businesses to be more competitive in the marketplace by reducing losses due to ESD and EOS.SCS EOSESD Audit Kit 751 contains: 701 Analog Surface Resistance Megohmmeter Kit718 Static Sensor718A Air Ionizer Test KitCTM051 Ground Pro Integrity MeterCTM082 ESD Pro ESD Events IndicatorCTC331-WW Iron Man Plus Workstation Monitor2382 Dual-Wire Metal Wrist Strap2214 Single-Wire Adjustable Fabric Wrist StrapHeavy Duty Molded Carrying Case with Handle and Wheels
View Complete Details
Ask Latest Price & Details
752 ESD Audit Kit

752 ESD Audit Kit

  • Series 752
EOSESD Audit Kits offer companies an effective way to detect ESD events and help prevent component failures. These tools help allow businesses to be more competitive in the marketplace by reducing losses due to ESD and EOS. SCS EOSESD Audit Kit 752 contains: 701 Analog Surface Resistance Megohmmeter Kit718 Static Sensor718A Air Ionizer Test KitCTM051 Ground Pro Integrity MeterCTM048-21 EM Eye ESD Event MeterCTC331-WW Iron Man Plus Workstation Monitor2382 Dual-Wire Metal Wrist Strap2214 Single-Wire Adjustable Fabric Wrist StrapHeavy Duty Molded Carrying Case with Handle and Wheels
View Complete Details
Ask Latest Price & Details
CTC110 - ESD Pro Event Indicator

CTC110 - ESD Pro Event Indicator

  • Series CTC110
CTC110 - ESD Pro Event Indicator, Replacement AntennaReplacement Antenna for CTM082 ESD Pro Event Indicator. Sold Per: EA Estimated Shipping Weight: 0.05 lb Stock Location: CHINO, CA This item is built-to-order. Please contact Customer Service for Lead Time. Orders will be accepted for a minimum of 1.
View Complete Details
Ask Latest Price & Details
LANTRONIX - LANTRONIX CONNECTOR KITUP

LANTRONIX - LANTRONIX CONNECTOR KITUP

  • Series LANTRONIX
The Lantronix unit is used for SMP installations. It is a rugged and powerful tool which enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet. This single-port Device Server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access.
View Complete Details
Ask Latest Price & Details
770004 - Charged Plate Analyzer

770004 - Charged Plate Analyzer

  • Series 770004
6" x 6" Charged Plate AnalyzerUse to evaluate the performance and functionality of ionizers.Customizable Measurement Capacitance Provides assurance that ESD process needs are met in manufacturing and that there is compliance to the requirements of ANSIESD S20.20 and EN 61340-5-1 testing per ANSIESD STM 3.1Programmable Discharge Time Mode Thresholds (1 to 1000V in 1V Increments) Tests the efficiency of an ionizers ion production by measuring the amount of time needed to neutralize a positive or negative charge on the isolated conductive plate.Peak ACTests the offset voltage (balance) between the positive and negative air ions output by an ionizer.Voltage Follower TechnologyMeasurements are made directly at the plate for greater stability and accuracy than charged plate monitors that use field meter technology.Large Signal Bandwidth: DC to 10 HzSuitable for testing AC technology ionizers.CE MarkedMeets the requirements of the applicable EC directives.NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, see Calibration.AC Adapter and North American Power Cord IncludedDesigned to be battery operated or operated while connected to a line voltage source.Made in the United States of AmericaThis item is stocked in Chino, CA.
View Complete Details
Ask Latest Price & Details
770005 - Charged Plate Analyzer

770005 - Charged Plate Analyzer

  • Series 770005
6" x 6" Charged Plate AnalyzerUse to evaluate the performance and functionality of ionizers.Customizable Measurement Capacitance Provides assurance that ESD process needs are met in manufacturing and that there is compliance to the requirements of ANSIESD S20.20 and EN 61340-5-1 testing per ANSIESD STM 3.1Programmable Discharge Time Mode Thresholds (1 to 1000V in 1V Increments) Tests the efficiency of an ionizers ion production by measuring the amount of time needed to neutralize a positive or negative charge on the isolated conductive plate.Peak ACTests the offset voltage (balance) between the positive and negative air ions output by an ionizer.Voltage Follower TechnologyMeasurements are made directly at the plate for greater stability and accuracy than charged plate monitors that use field meter technology.Large Signal Bandwidth: DC to 10 HzSuitable for testing AC technology ionizers.CE MarkedMeets the requirements of the applicable EC directives.NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, see Calibration.AC Adapter IncludedDesigned to be battery operated or operated while connected to a line voltage source.Power Cord Sold Separately770000 Power Cord, North America Plug770001 Power Cord, UK Plug770002 Power Cord, Europe Plug770003 Power Cord, China PlugMade in the United States of AmericaThis item is stocked in Chino, CA.
View Complete Details
Ask Latest Price & Details
711 - Charge Analyzer

711 - Charge Analyzer

  • Series 711
Designed to test the performance of products used for static control and eliminationStatic Field Meter SensorMeasures electrostatic fieldsVoltmeterMeasures the potential on charged objectsStatic Decay TimeMeasures charge-decay and balance of ionizing equipmentRemote Field Sensor ProbeMeasures the potential on charged objects in confined areasBuilt-In Rechargeable NiMH-batteries or AC Wall Plug-In AdaptorNIST CalibratedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, click here.
View Complete Details
Ask Latest Price & Details
701-M - Megohmeter

701-M - Megohmeter

  • Series 701-M - Megohmeter (Meter Only) For 701 Test Kit
Lightweight, user-friendly Analog Surface Resistance MegohmmeterTwo different test scales and settings for testing both surface-to-ground (Rtg) and surface-to-surface (Rtt) resistanceColor-coded number scales help identify ideal resistance rangesETL and CE ListedNIST CalibratedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, click here.
View Complete Details
Ask Latest Price & Details
NCA006 - GROUND PRO LEADS

NCA006 - GROUND PRO LEADS

  • Series NCA006
Replacement test leads for CTM051 Ground Pro MeterLength: 48 inchesIncludes:2 test leads2 retractable spring hooks2 alligator clips2 safety tip covers2 spade plugs
View Complete Details
Ask Latest Price & Details
701-W - 5 lb Test Weight

701-W - 5 Lb Test Weight

  • Series 701-W - 5 lb
701-W - 5 lb Test Weight, For 701 Test KitReplacement 5lb Weight for 701 Analog Surface Resistance MegohmmeterMade in the United States of AmericaThis item is made and stocked in Chino, CA.
View Complete Details
Ask Latest Price & Details
497AJN - Electronic Service Vacuum

497AJN - Electronic Service Vacuum

  • Series 497AJN
497AJN - Electronic Service Vacuum, 120 VACESD-SafeSelf-contained unit designed for high-efficiency cleanupIdeal for removing toner and dust or cleaning data processing equipmentPortable, quick setupDetachable power cord for easy storage
View Complete Details
Ask Latest Price & Details
497ABG - Electronic Service Vacuum

497ABG - Electronic Service Vacuum

  • Series 497ABG
497ABG - Electronic Service Vacuum, 220 VACESD-SafeSelf-contained unit designed for high-efficiency cleanupIdeal for removing toner and dust or cleaning data processing equipmentPortable, quick setupDetachable power cord for easy storage
View Complete Details
Ask Latest Price & Details
497ABG-NO - Electronic Service Vacuum without cord

497ABG-NO - Electronic Service Vacuum Without Cord

  • Series 497ABG
497ABG-NO - Electronic Service Vacuum without cord, 220 VACESD-SafeSelf-contained unit designed for high-efficiency cleanupIdeal for removing toner and dust or cleaning data processing equipmentPortable, quick setup220V
View Complete Details
Ask Latest Price & Details
497AJL - HEPA Vacuum

497AJL - HEPA Vacuum

  • Series 497AJL
497AJL - HEPA Vacuum, 120 VACESD-SafeDesigned for clean-up of hazardous materialIdeal for removing toner and dust or cleaning data processing equipmentPortable, quick setupDetachable power cord for easy storage120VIncludes:SV-PC8 8 Foot Power CordSV-SPF1 Type 1 FilterHEPA VACUUM HOSE-33 7 Foot HoseSV-CS1 Carrying StrapCertifications: cULusMade in the United States of America
View Complete Details
Ask Latest Price & Details
FF-1 - FF1 - FORENSIC FILTER ASSY

FF-1 - FF1 - FORENSIC FILTER ASSY

  • Series FF-1 - FF1
The Small Particle Collection Filter FF1 and Storage Bag are designed for sample collection. For the most efficient operation, use the filter unit only with the Small Particle Collection Vacuum 497AJW.
View Complete Details
Ask Latest Price & Details
497AJX - Forensic Vacuum

497AJX - Forensic Vacuum

  • Series 497AJX
497AJX - Forensic Vacuum, 120 VACESD-SafeDesigned for small particle collectionIdeal for removing toner and dust or cleaning data processing equipmentPortable, quick setupDetachable power cord for easy storage120VIncludes:SV-MPF2 Type 2 FilterSV-SH51 15 Foot Dissipative Hose15 Foot Power CordCertifications: cULusMade in the United States of America
View Complete Details
Ask Latest Price & Details
BRUSH CREVICE

BRUSH CREVICE

  • Series SV-CB1 - TOOL
SV-CB1 - TOOL, BRUSH CREVICE, VACUUMUsed with SV-CN1 crevice nozzle for general cleaning where brush is needed to loosen foreign materialCompatible with 497ABF, 497AJM, 497AJKMade in the United States of America
View Complete Details
Ask Latest Price & Details
SV-CVR - COVER ASSEMBLY

SV-CVR - COVER ASSEMBLY

  • Series SV-CVR
SV-CVR - COVER ASSEMBLY FOR 497 VACComplete cover assembly for the 497 VacuumIncludes:Vacuum Lid CoverDoor AccessorySV-S LatchSV-H HandleHingesHook and Loop
View Complete Details
Ask Latest Price & Details
SV-LS - LATCH VACUUM

SV-LS - LATCH VACUUM

  • Series SV-LS
SV-LS - LATCH VACUUMSold Per: EA Estimated Shipping Weight: 0.02 lb Stock Location: SANFORD, NC Replacement Latch for 497 Series Vacuum
View Complete Details
Ask Latest Price & Details
SV-WA1 - NOZZLE ASSEMBLY

SV-WA1 - NOZZLE ASSEMBLY

  • Series SV-WA1
SV-WA1 - NOZZLE ASSEMBLY, TUBULARStraight wand assembly used for general cleaningStatic dissipative properties prevent static buildupCompatible with 497ABF, 497AJM, 497AJKMade in the United States of America
View Complete Details
Ask Latest Price & Details
SV-WA2 - WAND ASSEMBLY

SV-WA2 - WAND ASSEMBLY

  • Series SV-WA2
SV-WA2 - WAND ASSEMBLY, BENTBent wand assembly used for general cleaning on hard to reach areasStatic dissipative properties prevent static buildupCompatible with 497ABF, 497AJM, 497AJKMade in the United States of America
View Complete Details
Ask Latest Price & Details
SV-H - SV-H HANDLE

SV-H - SV-H HANDLE

  • Series SV-H
Sold Per: EA Estimated Shipping Weight: 24.00 lb Stock Location: SANFORD, NC This item is built-to-order with 97 in stock. If more than 97 are needed, orders will be accepted for a minimum order quantity of 98. Please contact customer service for lead time.
View Complete Details
Ask Latest Price & Details
8800 SERIES 2-LAYER RUBBER,

8800 SERIES 2-LAYER RUBBER,

  • Color GRAY
  • Series 8800
  • Dimensions 0.065"x24"x40'
8800 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x24"x40'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8801 - MAT ROLL 2-LAYER RUBBER

8801 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Series 8801
  • Dimensions 0.065"x24"x40'
8801 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x24"x40'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8810 - MAT ROLL 2-LAYER RUBBER

8810 - MAT ROLL 2-LAYER RUBBER

  • Color GRAY
  • Dimensions 0.065"x24"x48"
  • Series 8810
8810 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x24"x48"Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8811 - MAT KIT 2-LAYER RUBBER

8811 - MAT KIT 2-LAYER RUBBER

  • Color BLUE
  • Dimensions 0.065"x24"x48"
  • Series 8811
8811 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x24"x48"Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8820 - MAT ROLL 2-LAYER RUBBER

8820 - MAT ROLL 2-LAYER RUBBER

  • Color GRAY
  • Dimensions 0.065"x30"x40'
  • Series 8820
8820 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x30"x40'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8821 - MAT ROLL

8821 - MAT ROLL

  • Color BLUE
  • Dimensions 0.065"x30"x40'
  • Series 8821
8821 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x30"x40'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8830 - MAT KIT

8830 - MAT KIT

  • Color GRAY
  • Dimensions 0.065"x36"x48"
  • Series 8830
8830 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x36"x48"Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8831 - MAT KIT

8831 - MAT KIT

  • Color Blue
  • Dimensions 36"x48"x0.065"
  • Series 8831
8831 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, BLUE, 36"x48"x0.065"Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8840 - MAT ROLL 2-LAYER RUBBER

8840 - MAT ROLL 2-LAYER RUBBER

  • Color GRAY
  • Dimensions 0.065"x24"x24'
  • Series 8840
8840 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x24"x24'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8841 - MAT ROLL 2-LAYER RUBBER

8841 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Dimensions 0.065"x24"x24'
  • Series 8841
8841 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x24"x24'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8850 - MAT ROLL

8850 - MAT ROLL

  • Color GRAY
  • Dimensions 0.065"x36"x40'
  • Series 8850
8850 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x36"x40'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8851 - MAT ROLL 2-LAYER RUBBER

8851 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Series 8851
  • Dimensions 0.065"x36"x40'
8851 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x36"x40'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8860 - MAT ROLL 2-LAYER RUBBER

8860 - MAT ROLL 2-LAYER RUBBER

  • Color 8860
  • Dimensions 0.065"x36"x24'
  • Series Gray
8860 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x36"x24'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details
8861 - MAT ROLL 2-LAYER RUBBER

8861 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Dimensions 0.065"x36"x24'
  • Series 8861
8861 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x36"x24'Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

  • (SCS)
  • Sanford, NC 27332 map, United States
  • Share us via
    Linkedin pinterest
View Contact No.