Other Products / Services #4977617

Serec Corporation's patented Airless technology can be used in state-of-the-art solvent extraction and reclamation systems as either a stand-alone machine or as a module in a process line. Our innovative design using a high vacuum, low temperature airless chamber enables our machines' performance to exceed that of our competitors. Vacuum technology is fully utilized in Serec solvent extraction systems in the following three areas: Solvent Emission Reduction Initially the air in the cleaning chamber is evacuated so that the solvent and the air are not interfaced with each other to eliminate the solvent emissions. De-gassing the Solvent When the solvent is placed under vacuum, the air dissolved in the solvent is eliminated to enhance the ultrasonic power this means cleaner parts. Drying the Parts Completely In the vacuum drying process, the vacuum is created in the cleaning chamber. The higher the vacuum, the lower the solvent boiling point becomes. The heat capacity of the parts helps boil the solvent and the evaporated vapor is recaptured and recycled in the system. Our Airless Vacuum Solvent Extraction Systems are designed and manufactured to the highest quality standards, ensuring reliable, durable performance in even the most demanding production environmentsMaterials

Serec Corporation offers contractual cleaning services using our patented Airless cleaning process. Our proprietary technique involves the use of a closed-loop vacuum system for cleaning. The combination of vacuum, tumbling, and ultrasonic cleaning aggressively removes contaminants such as petroleum-based organic oils, wax, solder flux, and impregnated grease from your parts. In addition, the use of a closed loop system ensures continuous recycling of the solvent, which results in almost zero emissions to the environment. The vacuum technology used in the process ensures complete cleaning and drying parts without spotting, incomplete dryness, or rust problems. We also use proven chlorinated solvents to get the best possible cleaning results. Our cleaning services are offered at competitive rates along with quick turnaround. Free test cleaning is also available prior to the cleaning cost estimate. If you need periodic cleaning for your parts, or have a special project, our cleaning services can solve your manufacturing challenge and keep your production line running.

Serec's standard line of Airless Vacuum Vapor Degreasing Machines provides you with high performance vacuum cleaning machines that meet many application requirements. Manufactured to the highest quality standards, our innovative designs provide efficient, environmentally-friendly cleaning for industrial applications. The cleaning process exceeds all EPA & OSHA regulations, and has achieved the "Maximum Achievable Control Technology" standard, resulting in the process to be SCAQMD permitted in California; the most stringent environmental laws in America. Since 1990, Serec installed over (40) machines in the state ofCalifornia.

Northeast Fabricators, a subsidiary of Serec Corporation, can fabricate ASME-certified tanks from a range of materials up to 2" in thickness. Our 250, 000 ft facility can accommodate the production of pressure vessels up to 12 ft in diameter and 50 ft in length. We offer sandblasting, painting and several coatings as options, and hardware such as platforms, ladders, and stairways are also available. These vessels are widely used in water purification systems, industrial cleaning systems, boilers, and chemical storage, to name a few of the many applications. In addition to pressure vessel fabrication to ASME Section 8, Division 1, we can also build vessels to any specification you require. Our quality assurance department will perform hydrostatic and pneumatic testing to test for leaks and to ensure compliance with the required standards.

Northeast Fabricators, a subsidiary of Serec Corporation, can fabricate ASME-certified tanks from a range of materials up to 2" in thickness. Our 250, 000 ft facility can accommodate the production of pressure vessels up to 12 ft in diameter and 50 ft in length. We offer sandblasting, painting and several coatings as options, and hardware such as platforms, ladders, and stairways are also available. These vessels are widely used in water purification systems, industrial cleaning systems, boilers, and chemical storage, to name a few of the many applications. In addition to pressure vessel fabrication to ASME Section 8, Division 1, we can also build vessels to any specification you require. Our quality assurance department will perform hydrostatic and pneumatic testing to test for leaks and to ensure compliance with the required standards.