Shoreline Flooring Supplies

Rapid setting self-leveling compound suitable on all cement and gypsum based substrates. Designed for leveling of floors under time pressure in interior areas. Many types of floor coverings can be laid after 1.5 hours. Schönox ZM Rapid can be installed up to 1inch.

Ready Mixed, Solvent-Free Acrylic Primer especially suitable as a primer for calcium sulfate based substrates (gypsum) as well as to bind residual dust and improve adhesion prior to installing luxury vinyl tiles (LVT) on suitable substrates using the Schönox ROLL and GO™ adhesive. Coverage: Approx 300 – 500 sq. ft. per unit of 1.3 gallons on strong absorbent and gypsum substrates Approx 1, 300 – 1, 400 sq. ft. per unit of 1.3 gallons when used as a primer with Schönox Roll and Go™ adhesive (using the Schönox KH Fix Roller) Approx 540 sq ft per 2 units of .25 gallons when used as a primer as part of the Schönox Roll and Go™ Set (units are included in the set) Drying Time: Approx 10 minutes on cement based substrates Approx 30 – 60 minutes on water resistant, calcium sulfate substrates and Schönox AP Approx 60 minutes on water resistant, gypsum plaster Approx 10 minutes on gypsum board Approx 60 minutes on old, water resistant adhesive residues Approx 60 minutes on particleboard, OSB board Working Temperature: Not below 59°F floor temperature

Cement Based Self-leveling Compound suitable on all cement and gypsum based substrates. Designed for fast leveling of floors in interior areas. Schönox ZM can be installed up to 78″. Moisture resistant (interior only.)

Two-Part, Epoxy Based Moisture Mitigation System suitable on porous, unheated concrete slabs to reduce moisture vapor emission rates from 100% RH or 25 lbs.1000 sq.ft.24 hrs to suitable levels before applying Schönox underlayments. Only one coat required to penetrate and to fully seal the substrate.

Synthetic Gypsum Based Self-leveling Compound especially suitable on all gypsum and cement based substrates as well as on mastic asphalts. Designed for refurbishment work in interior areas. Schönox AP can be installed up to 2″. 30NMM sq 5800 psi at 28 days Approx. 60-70 sq.ft. per unit at a thickness of 18″ EC 1PLUS : very low emission IEQ 4.3 Low-Emitting Materials-Flooring Systems, 1 point MR 1.1 Building Reuse Maintain Existing Walls, Floors and Roof, up to 3 points MR 1.2 Building Reuse Interior-Maintain Existing Interior Nonstructural Elements, 1 point MR 4 Recycled Content, up to 2 points Approx. 30 minutes at 68˚F After approx. 16 hours up to 18″ layer-thickness Not below 41°F floor temperature 55lb. net weight in paper bags

Synthetic Gypsum Based Fiber-reinforced, Self-leveling Compound especially suitable for wooden floors as well as other critical substrates designed for refurbishment work in interior areas. Embedded fibers provide a reinforcement making it unnecessary to lay a reinforcement fabric. Schönox APF is installed above 18″ up to 58″.