SIMIFAST

A two piece aluminum fastener for attaching aluminum signs to U-channel or square tubing. Each piece has a one way round head. FEATURES AND BENEFITS One Way Round Head Tamper resistant. Installed with standard screwdriver and removed with special tool (two tools required.) Aluminum Material Corrosion resistant. 38" Grip Range Allows for sign thickness and optional washers. Anodized Finish Additional corrosion resistance. Sets Are Packed In Bags Of 100 Better inventory control.

A threaded assembly intended to attach temporary metal signs to barricades or metal posts that are transported from one job site to another. No sharp edges are exposed on either end of the bolt that could damage other sign faces. The sign is first attached with a hex head bolt and a nylon insert locknut (for vibration.) Then a nylon cap is pushed onto the head of the bolt and an acorn nut is threaded onto the shank of the bolt.

A quick and economical way to secure two posts together and create a U-Channel breakaway system without requiring any special tools for installation. FEATURES AND BENEFITS Ease of Use No special tools required. All you need are two wrenches for fast installation. Economical The complete system consists of two nuts, two bolts, two washers and two spacer. A pair is needed for the system to work properly. (sold seperatly) Hardened Material Bolts are grade 9 hardened steel. Universal Design Can be used with U-Channel from various manufacturers. SimiFast Part Number Hardware can ship from stock.

A fully assembled kit to fasten a sign to a larger round or irregular diameter post with standard tools. Two kits are required to mount one sign. FEATURES AND BENEFITS Less inventory, no labor, losing parts, grab and go. Large post bracket, fits posts from 4” to 12” in diameter. Sold in pairs, one pair installs one sign. Can be installed with Standard nut and bolts or Tamper Resistant Fasteners. No special tools required, can be installed with one person and standard tools.

A universal threaded fastener assembly developed in 1976 to mount wooden or metal signs to 4” X 4” wooden posts. The assembly enabled a field installation with two assemblies and a box wrench rather than working out of four boxes of hardware. FEATURES AND BENEFITS Uses Standard Carriage Bolt, Exact size readily available for any application. Available Pre-Assembled, Most convenient for installer Available Un-Assembled, More economical Uses Vandlgard-Nut, Tamper resistant Packed In Box Of 100, Work out of one box whether assembled or bulk Field Tested, Still holding up after 25 years in snow burial and ultra-violet test sites

An assembly which includes a U-bolt, heavy aluminum casting, hex nuts, split lock washers and a sign mounting bolt. Two assemblies are required to mount one sign. If two signs are to be mounted back to back a "D" added to the part number will result in the appropriate components. FEATURES AND BENEFITS Aluminum Die-Casting Less porosity and better surface appearance than sand casting. Corrosion resistant. Large sign contact area Better for wind loading. Tapped hole in casting Permits preferred method of mounting signs. Recessed Areas For Attaching U-Bolt Nuts Nuts are secure once sign is in place. Optinal Sign Mounting Bolts VC190 is standard. For total security, choose VCB148T1, VC156-1 or VCB196-1. 516-18 Nuts & Bolts Other brackets in the industry use 14-20 hardware. Optional Spacers Raises U-Bolt nuts for side wrenching instead of socket wrenching. Optional Double Casting Enables two signs to be mounted back to back. Assemblies Are Packed In Boxes Of 50 Better inventory control.