Our Products #4964582

An assembly including the break-a-way feature of a Vandlgard-Nut, intended for mounting metal signs to bolt-on or strap-on brackets.
FEATURES AND BENEFITS
Wrenching Element Breaks Off At Pre-Determined Torque
Most secure method of mounting sign to bracket. Tightness is not determined by judgment of installer.
Remaining Portion Of Head Is Tapered
Cannot be removed with pliers and has an attractive finish.
Die-Cast Head From Zinc Alloy
No corrosion on sign face.
Packed In Bags Of 100
Better inventory control.
Lot Number On Each Bag
Traceable to raw material.

Universal brackets for mounting overhead signs from existing traffic pole mast arms. Slots are provided for stainless steel banding and brackets are easily adjustable for sign leveling.
FEATURES AND BENEFITS
FeaturesBenefits

Fixed & Adjustable Styles
Sign can be leveled to either horizontal or curved mast arms. Can be order in sets or individually.
AluminumStainlessBronze Construction
High strength, long life and low maintenance.
Pivot Point
Allows bracket to hang vertical.
Milled Adjustment Slot
Allows 4" adjustment of outer bracket by loosening one nut & bolt.
Offset Adjustment Bracket
Accessory to permit mounting sign perpendicular to flow of traffic when mast arm is at an angle.
Extensions of 6", 12", 18"
Can be added to inner or outer brackets to compensate for arc of mast arm or distance between mounting points.
Spring Loaded Dampers
Allows sign to swing during wind gusts and return to vertical position.
SimiFast Part Number
Brackets can ship from stock

A threaded assembly intended to attach temporary
metal signs to barricades or metal posts that are
transported from one job site to another. No sharp
edges are exposed on either end of the bolt that
could damage other sign faces. The sign is first
attached with a hex head bolt and a nylon insert
locknut (for vibration.) Then a nylon cap is pushed
onto the head of the bolt and an acorn nut is
threaded onto the shank of the bolt.

An assembly which includes a U-bolt, heavy aluminum casting, hex nuts, split lock washers and a sign mounting bolt. Two assemblies are required to mount one sign. If two signs are to be mounted back to back a "D" added to the part number will result in the appropriate components.
FEATURES AND BENEFITS

Aluminum Die-Casting
Less porosity and better surface appearance than sand casting. Corrosion resistant.
Large sign contact area
Better for wind loading.
Tapped hole in casting
Permits preferred method of mounting signs.
Recessed Areas For Attaching U-Bolt Nuts
Nuts are secure once sign is in place.
Optinal Sign Mounting Bolts
VC190 is standard. For total security, choose VCB148T1, VC156-1 or VCB196-1.
516-18 Nuts & Bolts
Other brackets in the industry use 14-20 hardware.
Optional Spacers
Raises U-Bolt nuts for side wrenching instead of socket wrenching.
Optional Double Casting
Enables two signs to be mounted back to back.
Assemblies Are Packed In Boxes Of 50
Better inventory control.

A two piece aluminum fastener for attaching aluminum signs to U-channel or square tubing. Each piece has a one way round head.
FEATURES AND BENEFITS

One Way Round Head
Tamper resistant. Installed with standard screwdriver and removed with special tool (two tools required.)
Aluminum Material
Corrosion resistant.
38" Grip Range
Allows for sign thickness and optional washers.
Anodized Finish
Additional corrosion resistance.
Sets Are Packed In Bags Of 100
Better inventory control.

A universal threaded fastener assembly developed in 1976 to mount wooden or metal signs to 4 X 4 wooden posts. The assembly enabled a field installation with two assemblies and a box wrench rather than working out of four boxes of hardware.
FEATURES AND BENEFITS
Uses Standard Carriage Bolt, Exact size readily available for any application.
Available Pre-Assembled, Most convenient for installer
Available Un-Assembled, More economical
Uses Vandlgard-Nut, Tamper resistant
Packed In Box Of 100, Work out of one box whether assembled or bulk
Field Tested, Still holding up after 25 years in snow burial and ultra-violet test sites

A fully assembled kit to fasten a sign to a larger round or irregular diameter post with standard tools. Two kits are required to mount one sign.
FEATURES AND BENEFITS
Less inventory, no labor, losing parts, grab and go.
Large post bracket,
fits posts from 4 to 12 in diameter.
Sold in pairs, one pair installs one sign.
Can be installed with Standard nut and bolts
or Tamper Resistant Fasteners.
No special tools required, can be installed with
one person and standard tools.

The Extruded Aluminum Bracket is the most advanced method of mounting traffic signs on 2 I.D. round posts. It is less expensive, easier to install and stronger than the previous generation of clamps. It can also be used for flag mounting of street name signs.
FEATURES AND BENEFITS

Extruded Shape Captures Bolt Head
Nuts can be tightened with one hand.
Consists Of Two Symetrical Brackets
Back to back signs can be mounted for the cost of an additional nut and bolt.
Brackets Can Be Attached To Sign Prior To Mounting On Post
Ease of installation. No problem in locating brackets on centers.
Standard Version Features Acorn Nuts On Sign Face
Smooth attractive appearance.
Several Hardware Options
Choose economy, corrosion resistance or tamper resistance.
One Size Wrenching Except When Acorn Nuts Are Utilized
One box wrench fits sign mounting nuts and bracket nuts.
Flexible Extrusions
Bracket can't be broken by overturning.

A quick and economical way to secure two posts together and create a U-Channel breakaway system without requiring any special tools for installation.
FEATURES AND BENEFITS

Ease of Use
No special tools required. All you need are two wrenches for fast installation.
Economical
The complete system consists of two nuts, two bolts, two washers and two spacer. A pair is needed for the system to work properly. (sold seperatly)
Hardened Material
Bolts are grade 9 hardened steel.
Universal Design
Can be used with U-Channel from various manufacturers.
SimiFast Part Number
Hardware can ship from stock.

The VC229 is a two piece Threaded System that is used specifically on square tubing for sign to post applications. It is reuseable, good on corrosion and tamper resistant. With a hex key or cordless driver it can be installed in seconds. Can also be used on barricades.
FEATURES AND BENEFITS

Tamper Resistant
Reduces loss of signs and liability claims.
Economical
Alternative to Drive Rivet.
1" Head Diameter
Resistance to wind loading.
Nylon Adaptor
Achieves large head diameter & protects sheeting.
Low Profile (Both Sides)
Attractive and safe.
Wide Grip Range
VC229-2D handles all sign to post applications from 1 34 to back to back signs on a 2 14 post.
Through Hole Fastener
Replaces two Drive Rivets on back to back applications.
Black Zinc Plating
Attractive-six times the corrosion resistance of bright zinc.
Easy Installation & Removal
Installed with cordless drill.