Our Products #5216666

Simmons suggests setting blade tension with a tension meter each time you put a new blade on or perform machine maintenance. This will reduce your operating costs in several ways: increased blade life, increased production time and reduced machine maintenance costs. Blades that are over tensioned can become stressed and may start showing signs of premature fatigue in the form of cracks on the back edge of the blade or in the gullet area between the teeth. Over tensioning will also start to pull the blade apart and will cause premature wear on the drive wheels and bearings. At the other end of the spectrum, too little tension on a blade can cause cracking along the back edge or a mushrooming effect along the back edge of the blade. This is caused by the blade being pushed back into the blade guide(s) as it is cutting the product.

Simcut 1200 is formulated to be used on cutting blades and guides used to cut foam and other similar products. It reduces product build-up, allowing blades to cut foam without pulling and creates a smooth slick surface, allowing you to slide foam products across cutting tables. This product is non-staining on most materials, is colorless and contains no nauseous chemicals or smells, and can be used in a food environment where incidental contact with food may occur. Please test on sample material first for any changes in material before using on production material or equipment.

APPLICATIONS:Bread OPTIONS AVAILABLE WITH THIS BLADE:14 Pitch12 PitchHard EdgeVariable Set Qualities

Rebond Foam Leather Carpet Recycling RubberCork Packaging Materials Textiles Insulation Material OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Single or Double BevelSingle or Double EdgeCustom Bevel GeometryTru-Trak Finish for Better Tracking PerformanceUltra Tru-Trak Finish for Minimum DeflectionBlade MovementMax-Trak for the Utmost QualityAvailable as Bands or Coils

Steel Stainless Steel Space Age Alloys Hard Woods Honeycomb Composites Pallets OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Multiple Set PatternsAvailable as Bands or Coil

Ceramic Tiles Glass Laminates Cast Iron Fiberglass Composites Concrete Reinforced Pipe Hardened Tool Steel Sheet Metal Wall Board Wire Reinforced Hose APPLICATIONS USED WITH CARBIDE TIPPED BLADE:Uranium Beryllium Hastalloy Cast Iron Titanium Inconel Waspalloy Monel OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Continuous or Gulleted EdgeAvailable as Bands or Coils

Fabric Felt Fibrous Materials Foam Rubber Products Sponges Vinyl Leather Paper Cardboard Filter Media OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Single or Double BevelHard Edge12 Pitch Available

Leather Splitting Rubber Splitting Textiles Carpet Recycling OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Custom Bevel GeometryChoice of Various TempersTru-Trak and Ultra Tru-TrakStainless SteelAvailable as Bands or Coils

Pork Fish Poultry Heavy Foam Plastic Cardboard Tubes Packaging Materials Polyethylene Foam OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Available as Bands or Coils

Aerospace Panels Various Honeycomb Materials Packaging OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Multiple Set OptionsHard EdgeAvailable as Bands or Coils

Light-Medium Foam Non-Woven Materials Non-Standard order minimums may apply. Single or Double BevelOther Pitches Available Upon RequestHard EdgeAvailable as Bands or Coils

Soft Foam Rubber Packaging Materials Fabric Insulation Material Vegetables Cheese Boneless Meat Products OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Single or Double BevelSingle or Double Edge180 Degree Twist (double edge only)Hard EdgeStainless SteelAvailable as Bands or Coils

Non-Standard order minimums may apply. Single or Double BevelSingle or Double Edge180 Degree Twist (double edge only)Set Teeth AvailableTooth Only, No BevelHard EdgeStainless Steel60mm Wide (available by special order)Available as Bands or Coils

Medium-Heavy Foam Non-ferrous Metals Mild Steel Wood Products Including Doors, Furniture, Cabinetry, Pallets, Crates, Packaging, etc. OPTIONS AVAILABLE WITH THIS BLADE:Non-Standard order minimums may apply. Multiple Set PatternsAvailable as Bands or Coils