Our Products

Simmons suggests setting blade tension with a tension meter each time you put a new blade on or perform machine maintenance. This will reduce your operating costs in several ways: increased blade life, increased production time and reduced machine maintenance costs. Blades that are over tensioned can become stressed and may start showing signs of premature fatigue in the form of cracks on the back edge of the blade or in the gullet area between the teeth. Over tensioning will also start to pull the blade apart and will cause premature wear on the drive wheels and bearings. At the other end of the spectrum, too little tension on a blade can cause cracking along the back edge or a mushrooming effect along the back edge of the blade. This is caused by the blade being pushed back into the blade guide(s) as it is cutting the product.

Simcut 1200 is formulated to be used on cutting blades and guides used to cut foam and other similar products. It reduces product build-up, allowing blades to cut foam without pulling and creates a smooth slick surface, allowing you to slide foam products across cutting tables. This product is non-staining on most materials, is colorless and contains no nauseous chemicals or smells, and can be used in a food environment where incidental contact with food may occur. Please test on sample material first for any changes in material before using on production material or equipment.

APPLICATIONS:
Bread

OPTIONS AVAILABLE WITH THIS BLADE:
14 Pitch
12 Pitch
Hard Edge
Variable Set Qualities

Rebond Foam Leather Carpet Recycling Rubber
Cork Packaging Materials Textiles Insulation Material





OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Single or Double Bevel
Single or Double Edge
Custom Bevel Geometry
Tru-Trak Finish for Better Tracking Performance
Ultra Tru-Trak Finish for Minimum DeflectionBlade Movement
Max-Trak for the Utmost Quality
Available as Bands or Coils

Steel Stainless Steel Space Age Alloys Hard Woods
Honeycomb Composites Pallets

OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Multiple Set Patterns
Available as Bands or Coil

Ceramic Tiles Glass Laminates Cast Iron Fiberglass
Composites Concrete Reinforced Pipe Hardened Tool Steel
Sheet Metal Wall Board Wire Reinforced Hose


APPLICATIONS USED WITH CARBIDE TIPPED BLADE:
Uranium Beryllium Hastalloy Cast Iron Titanium
Inconel Waspalloy Monel


OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Continuous or Gulleted Edge
Available as Bands or Coils

Fabric Felt Fibrous Materials Foam Rubber Products
Sponges Vinyl Leather Paper Cardboard Filter Media


OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Single or Double Bevel
Hard Edge
12 Pitch Available

Leather Splitting Rubber Splitting Textiles Carpet Recycling

OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Custom Bevel Geometry
Choice of Various Tempers
Tru-Trak and Ultra Tru-Trak
Stainless Steel
Available as Bands or Coils

Pork Fish Poultry Heavy Foam Plastic Cardboard Tubes
Packaging Materials Polyethylene Foam

OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Available as Bands or Coils

Aerospace Panels Various Honeycomb Materials Packaging

OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Multiple Set Options
Hard Edge
Available as Bands or Coils

Light-Medium Foam Non-Woven Materials

Non-Standard order minimums may apply.
Single or Double Bevel
Other Pitches Available Upon Request
Hard Edge
Available as Bands or Coils

Soft Foam Rubber Packaging Materials Fabric
Insulation Material Vegetables Cheese Boneless Meat Products


OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Single or Double Bevel
Single or Double Edge
180 Degree Twist (double edge only)
Hard Edge
Stainless Steel
Available as Bands or Coils

Non-Standard order minimums may apply.
Single or Double Bevel
Single or Double Edge
180 Degree Twist (double edge only)
Set Teeth Available
Tooth Only, No Bevel
Hard Edge
Stainless Steel
60mm Wide (available by special order)
Available as Bands or Coils

Medium-Heavy Foam Non-ferrous Metals Mild Steel Wood Products
Including Doors, Furniture, Cabinetry, Pallets, Crates, Packaging, etc.

OPTIONS AVAILABLE WITH THIS BLADE:
Non-Standard order minimums may apply.
Multiple Set Patterns
Available as Bands or Coils