Slide Products, Inc.

No chlorinated solvents • Paintable non-silicone formulation • Food-approved lubricant(+++++) • A direct food additive • Maximum operating temperature: 500°F LMR is a non-silicone, fully paintable mold release. It is non-crazing and will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. There is no build up on mold surfaces and minimal migration. (+++++) Meets or exceeds FDA and USPNF requirements for 21 CFR 172.878, 21 CFR 178.3620 and 21 CFR 573.680 NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solvents • NSF category M1 ( download NSF approval letter ) • Light duty silicone release • UL recognized • Maximum operating temperature: 600°F • Reviewed and Approved by Health Canada ( download Health Canada approval letter ) Contains the same high-quality ingredients as premium Silicone Release except formulated to be used for light-duty applications. For hard to release parts use No. 40112N Silicone Release. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solvents • Protection when molding PVC and flame-retardant resins • Provides dual protection against moisture and acids • A one-step rust preventive Acid Vapor Neutralizer is formulated to protect stored plastic molding dies from corrosive attack by hydrochloric and hydrobromic acids, as well as most common atmospheric corrosives and fingerprint acids. Length of protection is dependent on amount of PVC and flame-retardant being molded. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

Extremely dependable, with an almost indestructible stainless steel and polyacetal construction, you can fill Charge-It! with liquid bulk product and charge with compressed air (up to 150 PSI). The aerosol spray valves and tips feel and spray similar to a regular aerosol and are simple to replace at very little cost. Various spray tips and valves are also available. Product Number(s) 43600 (aerosol) Ordering instructions So that we can expedite your order please indicate your current Slide Products' distributor. If you do not have a Slide distributor we will route your order to the nearest local Slide distributor for prompt processing. The distributor's name and contact information will be included in the email you will receive confirming your order. Shipping information No special shipping charges required for ground aerosol shipments. Air shipments may require extra charges and paperwork as determined by carrier. UPS may impose a hazmat fee per cylinder or bulk container for ground shipments. Air shipments of cylinders are not allowed by UPS.

No chlorinated solvents • Paintable mold release • Fast-drying on cold and hot molds • Maximum operating temperature: 650°F Quick Paintable mold release imparts a smooth, dry film, drying quickly so you can start molding immediately. Quick Paintable release will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

This easy-to-handle unit is specially designed for use with Slide bulk products. It operates entirely on the atomizing principle. Air-O-Spray has a combination internal and external action in which mold releases, lubricants, cleaners, etc. can be atomized at low pressure and low mist. Any air compressor providing 50 PSI is ideal for this unit. Product Number(s) 42202 (sprayer) 42203 () Ordering instructions So that we can expedite your order please indicate your current Slide Products' distributor. If you do not have a Slide distributor we will route your order to the nearest local Slide distributor for prompt processing. The distributor's name and contact information will be included in the email you will receive confirming your order. Shipping information No special shipping charges required for ground aerosol shipments. Air shipments may require extra charges and paperwork as determined by carrier. UPS may impose a hazmat fee per cylinder or bulk container for ground shipments. Air shipments of cylinders are not allowed by UPS.