Our Products #4954855

Slides new spray can holder helps organize your space and keeps cans in place. Extruded from PVC, these extremely durable can holders can easily be bolted directly onto the side of a molding machine or tool cart to hold various Slide cans. Product Number(s)43800 (can holder) Ordering instructionsSo that we can expedite your order please indicate your current Slide Products' distributor. If you do not have a Slide distributor we will route your order to the nearest local Slide distributor for prompt processing. The distributor's name and contact information will be included in the email you will receive confirming your order. Shipping informationNo special shipping charges required for ground aerosol shipments. Air shipments may require extra charges and paperwork as determined by carrier. UPS may impose a hazmat fee per cylinder or bulk container for ground shipments. Air shipments of cylinders are not allowed by UPS.

Extremely dependable, with an almost indestructible stainless steel and polyacetal construction, you can fill Charge-It! with liquid bulk product and charge with compressed air (up to 150 PSI). The aerosol spray valves and tips feel and spray similar to a regular aerosol and are simple to replace at very little cost. Various spray tips and valves are also available. Product Number(s)43600 (aerosol) Ordering instructionsSo that we can expedite your order please indicate your current Slide Products' distributor. If you do not have a Slide distributor we will route your order to the nearest local Slide distributor for prompt processing. The distributor's name and contact information will be included in the email you will receive confirming your order. Shipping informationNo special shipping charges required for ground aerosol shipments. Air shipments may require extra charges and paperwork as determined by carrier. UPS may impose a hazmat fee per cylinder or bulk container for ground shipments. Air shipments of cylinders are not allowed by UPS.

No chlorinated solvents NSF category M1 ( download NSF approval letter )Light duty silicone release UL recognizedMaximum operating temperature: 600FReviewed and Approved by Health Canada ( download Health Canada approval letter ) Contains the same high-quality ingredients as premium Silicone Release except formulated to be used for light-duty applications. For hard to release parts use No. 40112N Silicone Release. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solvents Paintable non-silicone formulationFood-approved lubricant(+++++)A direct food additiveMaximum operating temperature: 500F LMR is a non-silicone, fully paintable mold release. It is non-crazing and will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. There is no build up on mold surfaces and minimal migration. (+++++) Meets or exceeds FDA and USPNF requirements for 21 CFR 172.878, 21 CFR 178.3620 and 21 CFR 573.680 NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solvents Paintable mold releaseFast-drying on cold and hot moldsMaximum operating temperature: 650F Quick Paintable mold release imparts a smooth, dry film, drying quickly so you can start molding immediately. Quick Paintable release will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solvents Food-approved lubricant(++)Faster molding & more production Approved for food packaging machineryRecognized by ULMaximum operating temperature: 600F Get more cycles per spray, more cycles per can, with Slides Silicone high-quality, pure silicone-oil mold release. Keeps the most challenging parts from hanging up and stalling production. Extremely effective for injection and compression molding. (++) Lubricants are suitable for food contact use as indicated in Title 21 of the Code of Federal Regulations. The appropriate sections for release agents are 175.300, 177.2600, 178.3570 and 181.28. Federal Definitions and Standards of identity for Food CFR 121.101 (G.R.A.S.). NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

Just spray and wipeSafe on all plasticsPleasant, fresh scent, contains no ammoniaNon-flammable, water-based cleaner with low VOCs Foaming spray effectively removes oil and dirt marks from all plastics, even sensitive polycarbonates. Plastic Cleaner is ideal for cleaning plastic parts, and helps remove mold releases prior to secondary operations. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solventsProtection when molding PVC and flame-retardant resinsProvides dual protection against moisture and acidsA one-step rust preventive Acid Vapor Neutralizer is formulated to protect stored plastic molding dies from corrosive attack by hydrochloric and hydrobromic acids, as well as most common atmospheric corrosives and fingerprint acids. Length of protection is dependent on amount of PVC and flame-retardant being molded. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

No chlorinated solventsContains rust and oxidant inhibitorsNLGI Grade #2 greaseMaximum Operating Temperature: 400F Econo-Spray Pin Lube & Grease is a white lithium grease that protects equipment by reducing the friction and sticking that can cause premature wear and hinder productivity. Pin Lube & Grease is ideal for knock-out pins where part marking could be a problem. A heavy-duty grease, it is water resistant, protects against corrosion and works at a wide range of temperatures. NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith. All cylinders, 1-gallon, 5-gallon and 55-gallon bulk products are made-to-order, are non-returnable and non-refundable. A small quantity can be provided as a free trial sample before ordering.

This easy-to-handle unit is specially designed for use with Slide bulk products. It operates entirely on the atomizing principle. Air-O-Spray has a combination internal and external action in which mold releases, lubricants, cleaners, etc. can be atomized at low pressure and low mist. Any air compressor providing 50 PSI is ideal for this unit. Product Number(s)42202 (sprayer)42203 () Ordering instructionsSo that we can expedite your order please indicate your current Slide Products' distributor. If you do not have a Slide distributor we will route your order to the nearest local Slide distributor for prompt processing. The distributor's name and contact information will be included in the email you will receive confirming your order. Shipping informationNo special shipping charges required for ground aerosol shipments. Air shipments may require extra charges and paperwork as determined by carrier. UPS may impose a hazmat fee per cylinder or bulk container for ground shipments. Air shipments of cylinders are not allowed by UPS.